Owners manual

General functions
26
General functions
Answering an incoming call
To answer an incoming call when the handset is
ringing, simply press the key. The handset is also
able to warn you of an incoming call while you are
already on a call. A tone sounds in the earpiece, and
the display will show that a second call is waiting.
This feature, known as
Call waiting , is only available if
your network supports it. For details of how to
activate and deactivate it see
Call waiting (Menu
9.3.4) on page 64.
If Call waiting is activated, you can put the first call
on hold and answer the second, by pressing or
by selecting the left soft key[Answer].
Rejecting an incoming call
You can reject an incoming call without answering by
simply pressing the key. During a call, you can
reject an incoming call by pressing the right soft key
[End] key or by pressing the .
Muting the microphone
You can mute the microphone during a call by
pressing the [Options] key then selecting
Mute . The
handset can be unmuted by selecting
Unmute.
When the handset is muted, the caller cannot hear
you, but you can still hear them.
Switching DTMF tones on during a call
To turn DTMF tones on during a call, press the left
soft key, and then select
DTMF on . DTMF tones can
be turned off the same way. DTMF tones allow your
phone to make use of an automated switchboard.
Multiparty or conference calls
The multiparty or conference service provides you
with the ability to have a simultaneous conversation
with more than one caller, if your network operator
supports this feature. A multiparty call can only be
set up when you have one active call and one call on
hold, both calls having been answered. Once a
multiparty call is set up, calls can be added,
disconnected or separated (that is, removed from the
multiparty call but still connected to you) by the
KG220_Benelux_Eng_0621 2006.6.21 11:12 AM Page 26