Owners manual

- Call speed: The speed of your data
connection; 9600 or 14400 (Depends
on Operator)
-
Linger time: You need to enter
timeout period.
After entering that, the WAP
navigation service will be unavailable
if any data is not input or transferred.
-
Primary server: Input the IP address
of the primary DNS server you
access.
-
Secondary server: Input the IP
address of the secondary DNS server
you access.
<GPRS settings>
The service settings are only available
when GPRS is chosen as a bearer
service.
-
APN: Input the APN of the GPRS.
-
User ID: The users identify for your
APN server.
- Password: The password required
by your APN server.
-
Primary server: Input the IP address
of the primary DNS server you
access.
-
Secondary server: Input the IP
address of the secondary DNS server
you access.
USB connection
(Menu 9.4.3)
You can choose one mode of Data service
and Mass storage.
When you have finished using the phone
memory, click Exit and take the following
steps.
1. Click on the notification area.
[Unplug or Eject Hardware]
Caution
v
Before you remove the cable, it is
necessary that you click Exit. Or,
the integrity of transferred data is
not guaranteed.
Settings
91