User manual

Setting up
Install an unit and a sub woofer as shown in the illustration below.
(Recommanded)
Plug the power cord of the unit and sub woofer into the power source.
The TV is not supplied.
The wireless subwoofer makes setup simple, too-
there are no cables to connect. When you turn on the unit and
subwoofer the connection will be completed automatically.
You can set up wireless connection manually, when your connection is not
completed.
Case 1 : If he wireless connection indicator will blink, press and hold x
(STOP) on the unit and then MUTE button on the remote control.
"REMATE" will be displayed.
Case 2 : If he wireless connection indicator will red, press and hold x
(STOP) on the unit and then MUTE button on the remote control.
"REMATE" will be displayed.
Disconnect and connect the power cord of the subwoofer to the wall outlet.
If the indicator on subwoofer is blue, the connection is completed.
Tips:
- If the wireless connection fails again, check whether there is any conflict
or strong interference (for example, interference from other electronic
devices) around your location. After removal of the conflict or strong
interference, repeat the above procedures.
- The available length is 10m for wireless connection on open place.
13
TV (Not supplied)
Sub Woofer
Main Unit
HLB54S-FP_BRUSLLK_ENG_4208 11/30/09 6:55 PM Page 13