Catalog

42
_ LG LIGHTING LG LIGHTING _
43
LIGHTING CONTROL TYPE
LIGHTING CONTROL SYSTEM
CONTROL SYSTEM
20 % 50 % 80 %
Day : Lower brightness on the windows side
100 % 100 % 100 %
Night : Same brightness for all areas
The level of sunlight is detected and
the brightness of the lights is controlled
automatically.
Daylight
Harvesting
80% 80% 80% 80%
Brighter during work hours
10% 10% 10% 10%
Darker during lunch time
Lights can be set on/off and brightness
adjusted according to a preset schdule
Centralized
Scheduling
20 % 50 % 80 %
Presentation Mode
100 % 100 % 100 %
General Mode
By simple control, a variety of modes can
be preprogrammed to create an optimal
environment.
Mode Control
10 % 10 % 10 % 10 %
No motion detected
80 % 80 % 80 % 80 %
Motion detected
Lights can be turned off or set to the
minimum brightness if motion is not
detected for a specifi ed period of time.
Motion Detection
※
Street Light PLC Control System is available for sale.
※
DALI Dongle / ZigBee Dongle are also available for sale as separate products.
OUTLINE OF WIRELESS LIGHTING CONTROL SYSTEM
Total solution for large building for converged management and optimal control of all lighting inside the building
Management
Controller
Communication Device
Lighting
User Interface Device
Sensor
Lighting Control Software
• Energy Monitoring
• Integration with
Building Management System
Wireless Dongle
0 – 10 V Controller
• 4 Channels, 48 Lights
through Fixed Connection
• Control Individual Channels
Wireless Lighting
0-10V Lighting
Sensor
• Daylight and Occupancy
Sensing in one Multi Sensor
Switch
• Group/Mode Control
• On/Off only, or Dimming Control
Smart Phone App
• Control Individual/Group Dimming
• Control Various Modes
※
Configuration depends on the product
※
Separate wireless AP required
Wireless
0-10V
LAN
Occupancy
Sensor
Multi
Sensor
Daylight
Sensor
The various lighting control modes
available with this system will reduce
the energy cost and operating expense.
By providing the right amount of light
at all times this economical system will
optimize energy cost savings.
Energy Cost
Saving
Automatic control system can be
preset in modes programmed to
create more effi cient work or task
environment
Work Effi ciency
Improvement
Wireless communication based
lighting control devices enable easy
reconfi guration by programming
change for re-partitioning of building
space. No additional communication
lines are required when installing new
lights.
Convenient Confi guration
of Repartitioning
This system provides a real time
monitoring function to check the lighting
status and energy consumption. The
lighting control software enables the
systematic management of energy use
for an entire building by showing the use
of energy by period, by fl oor, etc.
Real Time Status
Monitoring
Lighting Controller
• Separate Control of Individual /
Sub Group / Group / All Groups
• Scheduling
• Save of DB for Lighting Control
• facilitate up to 4,000 Lights and Control Devices
Wireless Gateway
• Wireless Communication Repeater
• Control up to 50 Wireless Devices
Wireless
0-10V