User manual

Operating 21
Operating
4
Setting the alarm
You can use the unit as an alarm clock.
You have to set the clock before setting the alarm.
1. Turn the unit on.
2. Press and hold TIMER.
3. Each of functions will blink. Press SET/RDS to
select a sound source you want. (TUNER, DVD/
CD, USB)
If you select FM function, select a preset station
by pressing
C/V
.
4. “ON TIME” will be displayed. This is your desired
time to the unit turns on. Press
C/V
to
change the hours and minutes and press SET/
RDS to save.
5. “OFF TIME” will be displayed. This is your desired
time to the unit turns off. Press
C/V
to
change the hours and minutes and press SET/
RDS to save.
6. Press
C/V
to change the volume and
press SET/RDS to save.
7. You can check the setting status.
8. If you want to reset the alarm, repeat steps 2-6.
y
If you set the clock time and alarm, you can
check the time by pressing CLOCK or the
alarm by pressing TIMER.
y
If the alarm is already set, press TIMER once
to cancel the alarm. To activate the alarm,
press TIMER once again.
y
If the clock time or the alarm is already set,
press and hold CLOCK or TIMER for at least
2 seconds to reset the clock timer or the
alarm.
y
If you select DVD/CD mode for alarm sound
source with a DVD/DivX CD on the disc
tray, the alarm sound source is switched to
TUNER mode automatically.
y
If you select USB mode for alarm sound
source with multi-device USB, the alarm
sound source is switched to TUNER mode
automatically.
,
Note
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay
time, the unit will be turned o . (You can see the
following order, 180 ->150 -> 120 -> 90 -> 80 -> 70
-> 60 -> 50 -> 40 -> 30 -> 20 -> 10)
To cancel the sleep function, press SLEEP
repeatedly until the display window get bright.
Press SLEEP. The remaining time appears in
the display window.
,
Note
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim o.
Turn off the sound temporarily
Press MUTE
@
on the remote control to mute
your sound.
You can mute your sound, for example, to answer
the telephone, “
q
“ will appear in the display
window.
To cancel it, press MUTE
@
again on the remote
control.
Auto Power Down
This unit will be o itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
DM2130-DU_APOLLLK_ENG.indd 21 2013-07-17  9:52:50