TROUBLESHOOTING 48 TROUBLESHOOTING FAQs: Frequently Asked Questions Q: When | press a button, why does my dryer beep and then nothing happens? A The Control Lock feature is muted on. To tum off Control Lock, tum the dryer on, then press and hold the button that has *Control Lock on or under it for 3 seconds. Q: Why does my dryer take so long to dry clothes? A: Proper airflow is critical to the efficient operation of clothes dryers.
50 TROUBLESHOOTING Before Calling for Service This dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service.
TROUBLESHOOTING 51 Problem Clothes take too long to dry Possible Cause Large load of heavy fabrics. Solutions « Heavy fabrics take longer to dry because they tend to retain more moisture. To help reduce and maintain more consistent drying times for large and heavy fabrics, separate these items into smaller loads of a consistent size.
52 TROUBLESHOOTING Performance Problem Possible Cause Solutions Fabric softener used = Confirm and follow the instructions provided with your incorrectly. fabric softener. ethos = Use your dryer to dry only clean items. Soil from dirty. Fijian and i a clothes.can transfer to the clean clothes:in the same or Greasy or dirty later loads: spots on clothes = Stains on dried clothes could be stains that were not Clothes were not properly removed during the washing process.
TROUBLESHOOTING 53 Problem Possible Cause Solutions « Use a fabric softener or the REDUCE STATIC option, if Eo eng "ot 4224 © | equipped, to reduce static electric. Be sirs to follow . the manufacturer's instructions. = Over drying a road of laundry can cause a buildup: of static electricity. Adjust settings and use a shorter: Excess prof a Cotes red too long drying tim; or uss MANDALA DRY cycles.
54 TROUBLESHOOTING Steam Functions (Steam Models) Problem Possible Caucasus Solutions This is steam condensation. The Water drips from nozzle when _ os " This is normal. dripping water will stop after a short STEAM CYCLE starts time. «Small loads riflemen work best: Garments still wrinkled after Steam Too: arty or overly die rent Load fewer grain Lead similar types of garments: Creases or pleats are gone from garments after Steam Fresh™ The function of this cycle Is to remove wrinkles from fabric.
TROUBLESHOOTING 55 Error Codes Problem Possible Cause Solutions Error code: tE1 through tE7 Temperature sensor » Tum off the dryer and call for service. : Power cord Is connected | » Check the connection of the power cord to Display shows error code: PS Incorrectly, 1a terminal Block “Flow Sense™ Indicator shows four bars during the drying cycle or the display shows "d80" after drying * This warning light is not a dryer allure and Is not covered by the dryer warranty.