Owners manual

38
Connecting to Networks and Devices
ATTENTION!IfyousetthesecurityoptionasOpen,youcannotprevent
unauthorisedusageofonlineservicesbyotherpeopleandadditionalcharges
maybeincurred.Toavoidunauthorizedusage,youareadvisedtokeepthe
securityoptionactive.
Wi-Fi Direct
Wi-Fi Direct supports a direct connection between Wi-Fi enabled devices without an
access point. Due to the high battery usage of Wi-Fi direct, it is recommended that you
plug your phone into a power outlet while using the Wi-Fi Direct feature. Check your
Wi-Fi & Wi-Fi Directed network in advance and make sure the users are connected to
the same network.
To turn on Wi-Fi Direct:
1 Tap the Menu Key > System settings > Wi-Fi.
2 Tap Wi-Fi Direct at the bottom of the screen.
3 Select a device to connect with from the scanned device list.
Using SmartShare
SmartShare uses DLNA (Digital Living Network Alliance) technology to share digital content
through a wireless network. Both devices must be DLNA certified to support this feature.
You can enjoy SmartShare feature on Gallery, Music, Video, and Polaris Office.
1 On the content you want to play or beam, tap .
2 Tap Play or Beam in the dialog box.
• Play: You can stream your content via TV, Bluetooth speaker, etc.
• Beam: You can send your content to Bluetooth devices or SmartShare Beam*
supported LG phones or tablets.
*SmartShare Beam quickly transfers multimedia contents through Wi-Fi Direct.
3 Tap the device to play or receive on the list.