Owners manual

15
ADVANCED FUNCTIONS
ENGLISH
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable en-
vironment.
1 Press P to turn the power on.
2 Open the remote control cover.
3 Press repeatedly to select the cool-
ing operation.
4 Press .
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Open the remote control cover.
2 Press 2nd F. button and check if icon
is on.
3 Press repeatedly to set the brightness
to the desired level.
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1 Open the front grille.
- Lift up both sides of the cover slightly.
2 Press the On/Off button.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
* The feature can be changed according a
type of model.
- For cooling-only models, the temperature
is set to 22°C (71.6°F).
NOTE
!
This function may not be supported,
depending on the model.
NOTE
!
This function may not be supported,
depending on the model.
ON/OFF
button
Room temp. Set temp.
Operation
mode
Below 21°C 24°C
Heating
operation
Above 21°C
and below
24°C
23°C
Dehumidify-
ing operation
Above 24°C 22°C
Cooling
operation