ENGLISH DEUTSCH FRANÇAIS SLOVENŠČINA 3D Blu-ray Disc™ Player with HD Tuner ITALIANO OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. MODEL BDS590 P/NO : MFL65225414 BD582CC-P.BAUTLLK_MFL65225414_ENG.indd 1 11. 3. 19.
BD582CC-P.BAUTLLK_MFL65225414_ENG.indd 2 11. 3. 19.
Safety Information 1 Safety Information 1 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Information This device is equipped with a portable battery or accumulator. I Safety Information Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Safety Information Notes on Copyrights • This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited. • Under the U.S.
Contents Contents 1 2 3 Cautions and Warnings 2 5 6 7 Component Video Connection 16 Composite connection 17 Scart connection Introduction Resolution Setting Connecting to an Amplifier 18 Connecting to an Amplifier via HDMI Output 19 Connecting to an Amplifier via Digital Audio Output 19 Connecting to an Amplifier via 2 Channel Audio Output 20 Preparation 4 16 18 Safety Information 8 HDMI Connection 17 1 3 15 Connecting to your Home Network 20 Wired network connection 21
Contents 6 35 [DISPLAY] Menu 37 [LANGUAGE] Menu 37 [AUDIO] Menu Troubleshooting 39 [LOCK] Menu 40 [NETWORK] Menu 83 General 41 [OTHERS] Menu 84 Picture 84 Sound 85 Network 86 Recording 4 Operation 47 Recording TV programmes Appendix 49 General Playback 54 Advanced Playback 87 57 On-Screen display 61 Enjoying BD-LIVE 62 Playing movie file and VR discs 88 Area Code List 63 Viewing a photo 89 Language code List 66 Listening to music 90 Trademarks and Licenses 69
Preparation 2 Preparation 2 Introduction Preparation About the “ ” Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.
Preparation Playable Discs Blu-ray Disc -- Discs such as movies that can be purchased or rented. -- BD-R/RE discs that contain Movie, Music or Photo files. DVD±R (8 cm / 12 cm disc) -- Video mode and finalized only -- Supports the dual layer disc also -- Finalized AVCHD format -- DVD±R discs that contain Movie, Music or Photo files. DVD-RW (8 cm / 12 cm disc) -- VR mode, Video mode and finalized only -- Finalized AVCHD format -- DVD-RW discs that contain Movie, Music or Photo files.
Preparation File compatibility NOTE Overall • HD movie files contained on the CD or USB 1.0/1.1 may not be played properly. BD, DVD or USB 2.0 are recommended to play back HD movie files. Available File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wma”, “.ts” 2 • There could be a variance on the available file extensions depending on DLNA server. • The file name is limited to 180 characters. • This player supports H.
Preparation Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”. AVCHD (Advanced Video Codec High Definition) This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.
Preparation Remote control OPEN/ CLOSE 2 Preparation CLEAR GUIDE REC. TIMER REC. • • • • • • a• • • • • • 1 (Power): Switches the unit ON or OFF. MUTE ( ): Mutes the sound. OPEN/CLOSE (Z): Opens and closes the disc tray. 0-9 numerical buttons: Selects numbered options in a menu. CLEAR: Removes a mark on the search menu or a number when setting the password. REPEAT: Repeats a desired section or sequence. TV/RADIO: Switches between TV and radio modes.
Preparation 13 Main Unit WIRELESS 2 Preparation j a 1 (Power) g lII/iil (Skip) b Disc Tray h Z (Open/Close) c Remote Sensor i USB Port d Display window j COMMON INTERFACE(CI or CI+) SLOT Slot for external Conditional Access (CA)module and smart card used to decode scrambled channels. This device works with CI or CI+ CAM. e ill (Play/Pause) f s (Stop) j a ANTENNA IN f VIDEO OUT b LAN port g TO TV (SCART Jack) c HDMI OUT (1080p) h AC IN connector Connect the supplied power cord.
Installation 3 Installation Connections to Your TV 3 Installation Make one of the following connections, depending on the capabilities of your existing equipment. • Antenna connection (page 14) • HDMI connection (page 15) • Component Video connection (page 16) • Composite connection (page 16) • Scart connection (page 17) NOTE • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit.
Installation HDMI Connection 15 NOTE If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, Version 1.3). Connect the HDMI jack on the unit to the HDMI jack on a HDMI compatible TV or monitor. • If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. • When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.
Installation Component Video Connection Connect the COMPONENT VIDEO OUT jacks on the unit to the corresponding input jacks on the TV using Y PB PR cables. Connect the left and right AUDIO OUT jacks of the unit to the audio left and right IN jacks on the TV using the audio cables. Component Connection NOTE When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 17.
Installation Scart connection Resolution Setting Connect one end of the scart cable into the TO TV SCART jack on the unit and other end to the corresponding in jack on your TV. You can get Audio and Video signals together with this connection. The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME ( 17 ). 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears.
Installation Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. 3 • HDMI Audio connection (page 18) • Digital Audio connection (page 18) • 2CH Analogue Audio connection (page 19) Connecting to an Amplifier via HDMI Output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 37-39.
Installation Connecting to an Amplifier via Digital Audio Output Connecting to an Amplifier via 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT (COAXIAL) jack to the corresponding in jack (COAXIAL) on your amplifier. Use an optional digital (coaxial) audio cable. You will need to activate the unit’s digital output. (See “[AUDIO] Menu” on page 37-39.
Installation Connecting to your Home Network This unit can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, Home Link, BD-Live interactivity and streaming services.
Installation 21 Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 4.
Installation Wireless Network Connection Another connection option is to use an Access Point or a wireless router. In the example configuration for wireless connection below, this unit would be able to access content from either of the PCs. The network configuration and connection method may vary depending on the equipment in use and the network environment. 3 Installation This player is equipped with an IEEE 802.11n (2.4 GHz band only) wireless module, which also supports the 802.11b/g standards.
Installation 2. The [Connection Setting] menu appears on the screen. Use U/u to select [Wireless] and press ENTER ( ). 23 NOTE • WEP security mode generally have 4 keys available on an access point or wireless router’s setting. If your access point or wireless router uses WEP security, enter the security code of the key “No.1” to connect on your home network. • An Access Point is a device that allows you to connect to your home network wirelessly. 3. Select [Yes] and press ENTER ( ) to continue.
Installation 7. The player will ask you to test the network connection. Select [OK] and press ENTER ( ) to complete the network connection. 8. If you select [Test] and press ENTER ( ) at step 7 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu.
Installation 25 USB device connection • For the purpose of the better reception place the player as close as possible to the access point. • In some instances, placing the access point or wireless router at least 0.45 m above the floor may improve the reception. • Move closer to the access point if possible or re-orient the player so there is nothing between it and the access point. This unit can play movie, music and photo files contained on a USB device.
Installation NOTE • This unit supports USB flash memory/external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). The USB device can be used for local storage for enjoying BD-Live discs from the Internet. 5. Select a file using U/u/I/i, and press PLAY or ENTER ( ) to play the file. • Please use the USB flash memory/external HDD formatted in either FAT16 or FAT32 when using BD-Live. • This unit can support up to 4 partitions of the USB device.
Installation About the external hard disk drive • While operating this recorder, do not detach HDD. It may cause a serious defect to this recorder. The hard disk drive (HDD) is a fragile piece of equipment. Please use the player following the guidelines below to protect against possible HDD failure. • Maximum capacity of HDD is limited to 1TB. • The HDD capacity displayed on your TV screen may not exactly same with the capacity printed on your HDD.
Installation Auto Set UP The recorder automatically searches for and saves the programmes. If you select [Stop], the [Channel Setting] function will be skipped. You can reset the recorder to all its factory settings. Some options cannot be reset (Rating and Password). The [Auto Setup] menu appears on the screen after the factory settings. Step 1. Language Setting 6. Press ENTER ( ). Step 3. Time Setting 1. Use I/i to select an option among [Manual] or [Auto], and press ENTER ( ). 1.
Installation Home Menu Overview Settings To access numerous functions of the unit, press HOME on the remote. Adjust the Setup Settings Basic button operations 1. Press HOME ( HOME: Accesses or removes the Home Menu. U/u/I/i : Used to navigate on-screen displays. ENTER ( ): Acknowledges menu selection. RETURN: Exits the menu. 29 You can change the settings of the player in the [Setup] menu. ). 2. Use I/i to select [Setup] and press ENTER ( ). The [Setup] menu appears. 3 Installation 3.
Installation Settings for Digital TV To use DTV functions, this recorder needs some settings in advance. Cable Setting (Auto Tuning) 1. Press HOME. 2. Use I/i to select [Setup], and press ENTER ( ). 3. Use U/u to select [DTV], and press ENTER ( ). 3 If you want to set the additional Quick Tuning, use U/u to select the [Setting], and press ENTER ( ). Unlike typical Tuning, Quick Tuning has Network ID setup function in Frequency, so you can search a Channel quickly and easily. Installation 4.
Installation Cable Setting (Manual Tuning) Scans programmes and adds the found programmes to the programme list. 1. Display [Setup] menu. 2. Use U/u to select [DTV], and press ENTER ( ). 3. Use U/u to select [Cable Setting], and press ENTER ( ) 4. Use U/u to select [Manual Tuning] and press ENTER ( ) to display the [Manual Tuning] menu.
Installation Scanning programmes manually for Terrestrial Antenna (Manual Tuning) 3 Editing Programme List (Channel Edit) Installation Scans digital TV or radio programmes and adds the found programmes to the programme list. You can remove any digital TV or radio programs stored on this recorder using the [Channel Edit] menu. 1. Display [Setup] menu. 1. Display [Setup] menu. 2. Use U/u to select [DTV], and press ENTER ( ). 2. Use U/u to select [DTV], and press ENTER ( ). 3.
Installation 6. Press RETURN to return to the previous step. Adjusting DTV Rating Skip : If the programme is assigned to skip, you can’t select that programme with PR button in Remote control. Viewing of some digital TV programmes can be limited according to the age limit you set. Block/unblock : If the programme is assigned to block and [DTV Lock] in the [Setup] menu is set to [Lock], you should enter the password to watch the programme. 2. Use U/u to select [LOCK] and press ENTER ( ).
Installation NOTE The [Terrestrial Setting] option must be set to [Antenna 5V Off ] when your indoor antenna is supplied the power from the mains. If you set the [Terrestrial Setting] option to [Antenna 5V On] for the indoor antenna which is supplied power from the mains, it may cause serious defect to this unit.
Installation CI Information You can enjoy not only scramble services using the Conditional Access Module (CAM), but also Free-To-Air services. Different CAM supports different encryption system. Contact your service provider or distributor to obtain the right kind of CAM. Only Free-To-Air services are available without CAM. This option displays a menu of CI card functions. Consult your service provider for more information on the functions available.
3 Installation Resolution HDMI Color Setting Sets the output resolution of the Component and HDMI video signal. Refer to page 17 and 96 for details about the resolution setting. Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [Auto] If the HDMI OUT jack is connected to TVs providing display information (EDID), this automatically selects the resolution best suited to the connected TV.
Installation [LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and on-screen display. Disc Menu/Disc Audio/Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. [Off] (Disc Subtitle only) Turn off Subtitle. NOTE Depending on the disc, your language setting may not work.
Installation [Primary Pass-Thru] Select if you connect this unit’s DIGITAL AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. NOTE • When [HDMI] option is set to [PCM Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID.
Installation DTS Neo:6 If the player is connected to the multi-channel Audio Receiver by HDMI connection, set this option to enjoy the multi-channel surround sound with the 2-channel audio source. [Off] Outputs the stereo sound via front speakers. [Music] Outputs the multi-channel sounds that are optimized for listening to music. [Cinema] Outputs the multi-channel sounds that are optimized for watching movie. • This function is not available on an on-line service.
Installation DTV Lock Area Code Allows you to set up specific programs and through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the lock menu options. When the DTV Lock is set to [unlock]. (See “Setting the DTV Lock” on page 33.) Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 88.
Installation [OTHERS] Menu Time Setting The clock must be set in order to use timer recording. [Auto] Select a programme that broadcasts a clock signal and the clock will be set automatically. If the time that has been automatically set is not correct when compared your local time, you can set additional time option. DivX VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.
Installation Disclaimer Notice Press ENTER ( ) to view the notice of Network Service Disclaimer on page 98. Auto Power Off The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns itself off after the Screen Saver is displayed for 25 minutes. Set this option to [Off ] to leave the screen saver until the unit is operated by the user.
Operation 43 4 Operation Using the Digital TV functions You can watch and record the digital TV programmes or playback the recorded TV programmes you want to watch using this unit. Changing Digital TV programmes Generally, press PR (U/u) to select the programme position, or entering a programme number using numerical buttons. If you want to change the programme on the program me list, follow the instruction as below. 1. While watching DTV, press PR LIST.
Operation Setting favourite programmes You can set the storage location where you want to store the DTV recordings. 1. While watching DTV, press PR LIST Viewing the programme information You can view a description of the programme being broadcast. 2. Use U/u to select a programme you want to add on the Favourite List. 3. Press blue coloured (B) button to display [Select Favorite Group] menu. 4. Use U/u to select a group and press ENTER ( ) to add the programme on the selected group. 1.
Operation Selecting DTV subtitle language Some digital programmes may broadcast several subtitle languages. You can select a subtitle language when it is available. 1. While watching DTV, press SUBTITLE. 45 To Exit the Program Guide Press the RETURN button to return to the last program you tuned to. To change guide menu The guide screen provides two search menus. Press blue colored (B) button when the Programme Guide is displayed. 2. Use I/i to select a subtitle language, and press ENTER ( ).
Operation To change date When the Program Guide with 8 days is displayed, you can also change the date of the Program Guide by pressing the green colour button then use I/i to select a date then press ENTER ( ). After setting favorite channels from the PR list, you can use the yellow button to toggle between [All] and [Favorite] channel list.
Operation Recording TV programmes 47 Timer Recording (Manual) You can set the timer for a total of 32 programmes, up to 22-28 days in advance. 1. While watching TV, press TIMER REC. When connected to external HDD, this function will be available. You can record Digital TV programmes and store them on the HDD. Recording scrambled and FTA channels will be proceeded separately. In case of Scrambled channel, this channel will be recorded with encryption.
Operation Timer Recording (EPG) Canceling a timer recording You can also set the timer based on the information provided by the EPG. You can cancel a timer recording before the timer recording actually starts. 1. While watching TV, press GUIDE. 1. While watching TV, press TIMER REC. 2. Press the red coloured (R) button. 3. Use I/i/U/u to select a schedule you want to cancel. 2. Use I/i to select date field, and select the date of recording schedule using U/u. 4.
Operation Instant Timer Recording 49 General Playback You can set the recording time instantly to stop the recording automatically. 1. Use PR (U/u) to select a programme you want to record. 2. Press z REC. to start recording. 3. While recording, press I/i repeatedly to set the recording duration Playing Discs 1. Press Z (OPEN/CLOSE), and place a disc on the disc tray. Insert a disc 4. Press ENTER ( ). 5. Press x to stop recording.
Operation To stop playback Press x (STOP) during playback. To pause playback Press X (PAUSE) during playback. Press B (PLAY) to resume playback. While navigating [Movie], [Photo] or [Music] menu, press green(G) colored button to change the device. (DISC or USB) 6. Select a file using U/u/I/i, and press B (PLAY) or ENTER ( ) to play the file. NOTE 4 • Playback functions described in this manual are not always available in every files and media.
Operation Using the disc menu BD DVD AVCHD To display the disc menu 51 Playing the recorded titles 1. While watching TV, press REC LIST to display the options menu or press REC LIST in Home menu. The menu screen may be displayed first after loading a disc which contains a menu. If you want to display the disc menu during playback, press DISC MENU. Use U/u/I/i buttons to navigate through menu items. To display the Pop-up menu Some BD-ROM discs contain a Pop-up menu that appears during playback.
Operation [Clear] – Clear all entered characters. [Space] – Inserts a space at the cursor position. [<–] – Deletes the previous character at the cursor position. Playing content contained in the external hard disk drive 1. Press HOME ( ). [ABC / abc / #+-=&] – Change the keyboard menu settings to capital letters, small letters or symbols. NOTE To enter a letter with an accent mark: 1. Select a letter using U/u/I/i on the keyboard menu. 2.
Operation Playing Blu-ray 3D disc 53 3. Press Z (OPEN/CLOSE) to close the disc tray. This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. Preparation The playback starts automatically. The 3D icon appears on the screen when 3D content is in playback. In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: 4. Refer to the owner’s manual of your 3D-ready TV for the further instruction.
Operation 3D available Blu-ray 3D Discs The “Blu-ray 3D” logo labeled BD-ROM disc can be played on this player with 3D mode output. If your TV is not the Blu-ray 3D-ready TV*, 2D mode output is available. The “Blu-ray 3D ONLY” logo labeled BD-ROM disc can be played on this player with 3D mode output. The Blu-ray 3D ONLY disc playback is not available, if your TV or player are not the Blu-ray 3D-ready device. * 3D-ready TV refers to TVs that are compliant with “HDMI 1.4 3D mandatory format” standard.
Operation Repeating a specific portion BD DVD AVCHD ACD Marker Search BD DVD AVCHD MOVIE MOVIE-N This player can repeat a portion you have selected. You can start playback from up to nine memorized points. 1. During playback, press REPEAT to select [A-] at the beginning of the portion you wish to repeat. To enter a marker 2. Press ENTER ( ) at the end of the portion. Your selected portion will be repeated continually. 3. To return to normal playback, press REPEAT repeatedly to select [Off ]. 1.
Operation Using the search menu BD DVD AVCHD MOVIE MOVIE-N Using search menu, you can easily to find the point where you want to start playback. Changing content list view MOVIE MOVIE-N MUSIC MUSIC-N PHOTO REC On the [Movie], [Music], [Photo] or [Home Link] menu, you can change the content list view. To search a point 1. During playback, press SEARCH to display the search menu. Method 1 Press red (R) coloured button repeatedly. 2. Press I/i to skip the playback 15 seconds forward or backward.
Operation Viewing content information MOVIE MOVIE-N REC 57 On-Screen display The player can display the content information. 1. Select a file using U/u/I/i. 2. Press INFO/DISPLAY ( ) to display the option menu. 3. Select the [Information] option using U/u, and press ENTER ( ). The file information appears on the screen. During movie playback, you can display the file information by pressing TITLE/POPUP.
Operation i Movie Information – Select this option and press ENTER ( ) to display movie information from Gracenote Media Database (BD/DVD only). 2. Select an option using U/u. 3. Use I/i to adjust the selected option value. 4. Press RETURN (O) to exit the On-Screen display. NOTE • If no button is pressed for a few seconds, the onscreen display disappears. • A title number cannot be selected on some discs. 4 • Available items may differ depending on discs or titles.
Operation Hearing different audio BD REC DVD AVCHD MOVIE MOVIE-N Selecting a subtitle language BD REC DVD AVCHD MOVIE MOVIE-N 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 2. Use U/u to select the [Audio] option. 2. Use U/u to select the [Subtitle] option. 3. Use I/i to select desired audio language, audio track or audio channel. 3. Use I/i to select the desired subtitle language.
Operation Changing the TV Aspect Ratio BD REC DVD AVCHD MOVIE MOVIE-N BD REC DVD AVCHD MOVIE MOVIE-N You can change the TV aspect ratio setting during playback. You can change the [Picture mode] option during playback. 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 2. Use U/u to select the [TV Aspect Ratio] option. 2. Use U/u to select the [Picture Mode] option. 3.
Operation Enjoying BD-LIVE This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.
Operation Playing movie file and VR discs NOTE • The file requirements are described on page 10. • You can use various playback functions. Refer to pages 49-60. You can play DVD-RW discs that are recorded in Video Recording (VR) format and movie files contained on a disc/USB device. 1. Press HOME ( ). • Unfinalized DVD VR format discs may not be played in this player. • Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs.
Operation NOTE 63 Viewing a photo If you press x (STOP) during playback, the subtitle selection is cancelled. You can view photo files using this player. 1. Press HOME ( ). Changing subtitle code page MOVIE MOVIE-N If the subtitle is not displayed properly, you can change the subtitle code page to view the subtitle file properly. 1. During playback, press INFO/DISPLAY ( ) to display the On-Screen display. 2. Use U/u to select the [Code Page] option. 3. Use I/i to select desired code option. 2.
Operation To play a slide show Press B (PLAY) to start the slide show. To stop a slide show Press x (STOP) during slide show. To pause a slide show Press X (PAUSE) during slide show. Press B (PLAY) to re-start the slide show. To skip to the next/previous photo While viewing a photo in full screen, press I or i to go to the previous or next photo. NOTE 4 • The file requirements are described on page 10. Operation • You can use various playback functions. Refer to pages 49-60.
Operation Listening to music during a slide show You can display photo files while listening to music files. 1. Press HOME ( ). 2. Select [Photo] or [Home Link] using I/i, and press ENTER ( ). 65 7. Use U/u to select a device, and press ENTER ( ). Devices that you can select may differ depending on the location of the photo file you are displaying in full screen. Photo location Available Device Disc Disc, USB USB Disc, USB Share Folder on your PC (CIFS) CIFS DLNA server DLNA server U/u 8.
Operation Listening to music NOTE • The file requirements are described on page 10. This player can play Audio CDs and music files. 1. Press HOME ( • You can use various playback functions. Refer to pages 49-60. ). 2. Select [Music] using I/i, and press ENTER ( ). 3. Select the [Disc] or [USB] option using I/i, and press ENTER ( ). 4 Operation This step is needed only when a disc or a USB device is connected on this unit.
Operation Audio CD Recording You can record one desired track or all of the tracks in Audio CD to the USB storage device. 1. Press OPEN/CLOSE(Z), and place an Audio CD on the disc tray. Press OPEN/CLOSE(Z) to close the disc tray. The playback starts automatically. 2. Press INFO/DISPLAY ( ) to display the option menu. 3. Use U/u to select [CD Recording] option, and press ENTER ( ) to display the [CD Recording] menu. 4. Use U/u to select a track you wish to copy on the menu, and press ENTER ( ).
Operation The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.
Operation NOTE • The player must be connected to the broadband internet for accessing the Gracenote Media Database. • If the music information is not in the Gracenote Media Database, message appears on the screen. Playing content via your home network (Home Link) • If the information from the Gracenote Media Database is either not correct or does not exist, please contact www.gracenote.com for support.
Operation Accessing a DLNA media server NOTE 1. Check the network connection and settings (pages 20-25). • The file requirements are described on page 10. 2. Press HOME ( • Because the compatibility and available playback functions on the [Home Link] menu are tested on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and playback functions on the [Home Link] menu may differ depending on media servers. ). 3. Select [Home Link] using I/i, and press ENTER ( ). 4.
Operation About Nero MediaHome 4 Essentials • Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16-bit colour settings Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNAcompatiable digital media server. • Windows® Internet Explorer® 6.0 or higher • DirectX® 9.0c revision 30 (August 2006) or higher • Network environment: 100 Mb Ethernet, WLAN (IEEE 802.
Operation Sharing files and folders On your computer, you must share the folder that contains the movie, music and/or photo content to play them using [Home Link] features. Accessing a share folder from your PC 1. Start your PC that is connected on your local area network. This part explains the procedure for selecting the shared folders on your computer. 2. On your PC, share folders which contain movie, photo or music files. 1. Double-click the “Nero MediaHome 4 Essentials” icon on the desktop.
Operation NOTE Entering a network user ID and the password • You can use various playback functions. Refer to pages 49-60. Depending on your PC’s environment, you may need to enter a network user ID and the password for accessing a shared folder. • The thumbnail of the unplayable files can be displayed in the [Home Link] menu, but those cannot be played on this player. 1. The virtual keyboard appears automatically if the network user ID and the password are required.
Operation Using the NetCast™ Entertainment Access Playing YouTube™ videos You can use various content services via Internet with the NetCast Entertainment Access feature. Watch YouTube™ videos on your TV 1. Check the network connection and settings (pages 20-25). 2. Press HOME ( ). 3. Select the [NetCast] using I/i, and press ENTER ( ). 4. Select an option using I/i, and press ENTER ( ). 4 YouTube™ – See page 74-75 Operation Picasa™ Web Albums – See page 77-80 AccuWeather – See page 80-81 5.
Operation About the YouTube™ menu There are various options on the YouTube™ menu. Use U/u/I/i to select an option and press ENTER ( ) to select the options as described below. Featured – The featured videos list will be displayed. Recent Videos – The most recently updated videos list will be displayed. Most Viewed – The most viewed videos list will be displayed. The period option appears at the bottom of the screen. Top Rated – The best rated videos list from YouTube™ server will be displayed.
Operation [Cancel] – Returns to the previous screen. [Space] – Inserts a space at the cursor position. [Backspace] – Deletes the previous character at the cursor position. [ABC / abc / #+-=&] – Changes the virtual keyboard settings to capital letters, small letters or symbols. Press CLEAR to clear all entered characters. To enter a letter with an accent mark: 1. Select a letter using U/u/I/i on the virtual key board. 2. Press INFO/DISPLAY ( ) to display the extended character set. 4 3.
Operation 77 Viewing Picasa™ Web Albums 2. Use U/u/I/i to select a character then press ENTER ( ) to confirm your selection on the virtual keyboard. Refer to “Using the virtual keyboard” on page 75-76 for using virtual keyboard. 3. When you finish entering the user name and the password, select [OK] and press ENTER ( ) to sign in. 4. If you want to sign out, select the [Sign Out] from the YouTube™ menu and press ENTER ( ).
Operation a b c d e f g a Current photo/Total number of photos – Use I/i to view previous/next photo. b Slide Show – Press ENTER ( ) to start or pause slide show. c Add to NetCast Friends List – Add the current photo owner to my friend list. d Rotate – Press ENTER ( ) to rotate the photo clockwise. 4 e Zoom – Press ENTER ( ) to display the [Zoom] menu. Operation f Effect – Use I/i to select a transition effect between photos in a slide show.
Operation 3. Enter a name using the virtual keyboard. Refer to “Using the virtual keyboard” on page 75-76 for using virtual keyboard. 4. Select [OK] using U/u/I/i, and press ENTER ( ) to display the web album of your friend. 79 Signing in with your account To display photos in your web album on the screen, you need to sign in with your Picasa™ account. 1. Select the [Sign In] on the Picasa™ menu using U/u/I/i, and press ENTER ( ).
Operation Using the AccuWeather See on-line local and global weather forecasts from AccuWeather.com. Select the [X] symbol and press ENTER ( ) to delete the stored user name. Viewing weather information 1. On the player, select the [AccuWeather] option in the [NetCast] menu using I/i, and press ENTER ( ). The city selection menu appears on the screen. 4 Operation 2. Press ENTER while [Add City to Favorite City List] is selected. 3. Select a region using U/u, and press ENTER ( ). 4.
Operation 6. Use U/u/I/i to select [Home] and press ENTER ( ) to display weather information of the selected city. 81 3. Select a region, country and city using U/u/I/i and ENTER ( ). 4. Repeats step 2-3 to add up to 5 cities. Select the [X] symbol and press ENTER ( ) to delete the stored favorite city. 5. Use U/u to select a city form the [Favorite City List], and press ENTER ( ) to display the weather information.
Maintenance 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Troubleshooting 83 6 Troubleshooting General Cause & Solution The Power does not turned on. • Plug the power cord into the wall outlet securely. The unit does not start playback. • Insert a playable disc. (Check the disc type, color system, and regional code.) • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • Clean the disc. • Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting Picture Symptoms Cause & Solution There is no picture. • Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. • Connect the video connection securely. • Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. • Your TV may not support the resolution you have set on the unit. Change the resolution to one that your TV accepts.
Troubleshooting 85 Network Symptoms Cause & Solution BD-LIVE feature does not work. • The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. • Ensure that the unit is correctly connected to the local area network and can access the internet (see pages 20-25). • Your broadband speed may not be fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed to suit the unit’s requirements.
Troubleshooting Recording Symptoms Solution Cannot record or does not record successfully. • Check the remaining space on the external HDD. • If your source is copy-protected, you cannot record it using this recorder. • If you set a DTV rating for the recorder and higher rated digital programs are received, the programme cannot be recorded. Change the DTV rating level in order to record it. • Clock is not set to correct time. • The start time of the timer recording is past.
Appendix 87 OPEN/ CLOSE 7 Appendix CLEAR GUIDE REC. Controlling a TV with the Supplied Remote Control TIMER REC. DISC MENU REC.LIST You can control your TV using the buttons below. MARKER SEARCH TEXT SUBTITLE AV/INPUT ZOOM VOL PR VOL PR You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR U/u Scan up or down through memorized channels.
Appendix Area Code List Choose an area code from this list.
Appendix 89 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses “Blu-ray Disc”, “Blu-ray” and “Blu-ray disc” logo are trademarks of Blu-ray Disc Association. “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray Disc Association. “BD-LIVE” logo is a trademark of Blu-ray Disc Association. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
Appendix DivX is a registered trademark of DivX, Inc., and is used under license. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. “x.v.Colour” is a trademark of Sony Corporation. consumption system in stand-by mode is built. Therefore, the small amounts of electricity are consumed even though the power plug is inserted. Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc.
Appendix Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn on the player. 2.
Appendix 3. Select [Update] option, and press ENTER ( ). 93 8. Select [OK] to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.) CAUTION The player will check for the newest update. NOTE • Pressing ENTER while checking for the update will end the process. • If there is no update available, the Message, “No update is found.” appears.
Appendix Audio Output Specifications Jack/Setting Source Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD Linear PCM 2ch Linear PCM 5.1ch Linear PCM 7.
Appendix *5 If the [HDMI] or [Digital Output] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1Ch. If the [HDMI] or [Digital Output] option is set to [DTS re-encode], the DTS Re-encode audio is output for BD-ROM discs, and the original audio is output for the other discs (like [Primary Pass-Thru]).
Appendix Video Output Resolution When the non-copy protected media is playing back Video Out Resolution HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected 576i 576P 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080i 1080p/24Hz 1080p / 24Hz 576i 1080i 1080p / 50Hz 1080p / 50Hz 576i 1080i When the copy protected media is playing back Video Out Resolution Appendix 7 HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected 576i 576p 576i 576p 576p 576p
Appendix Specifications ANALOGUE AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 General DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 Ω, RCA jack x 1 Power requirements: AC 200-240 V, 50/60 Hz Power consumption: ANTENNA IN: USB Port: 45W Operating temperature: 2.
Appendix Important Information Relating to Network Services PLEASE READ CAREFULLY. USE OF THE NETWORK SERVICES IS SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. Use of the Network Services requires an Internet connection which is sold separately and for which you are solely responsible. The Network Services may be limited or restricted depending upon the quality, capabilities and technical limitations of your Internet service.
Appendix Open source software notice 99 • ntp : copyright © David L. Mills 1992-2006 • OpenSSL library : – cryptographic software written by Eric Young (eay@cryptsoft.com). – software written by Tim Hudson (tjh@cryptsoft. com). The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/ LGPL2.1 Licence Agreements: GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, dhcpcd, mkdosfs, mtd-utils, net-tools, ntfsprogs, gdbserver, procps, samba-3.0.
BD582CC-P.BAUTLLK_MFL65225414_ENG.indd 100 11. 3. 19.