Owners manual

Network settings [Menu 4-5]
You can select a network which will be registered
either automatically or manually. Usually, the
network selection is set to Automatic.
Automatic [Menu 4-5-1]
If you select Automatic mode, the phone will
automatically search for and select a network for
you. Once you have selected “Automatic”, the
phone will be set to “Automatic” even though the
power is off and on.
Manual [Menu 4-5-2]
The phone will find the list of available networks
and show you them. Then you can select the
network which you want to use if this network has
a roaming agreement with your home network
operator. The phone let you select another
network if the phone fails to access the selected
network.
Preferred [Menu 4-5-3]
You can set a list of preferred networks and the
phone attempts to register with first, before
attempting to register to any other networks. This
list is set from the phone’s predefined list of
known networks.
GPRS setting [Menu 4-6]
You can set GPRS service depending on various
situation.
Power on [Menu 4-6-1]
If you select this menu, the phone is
automatically registered to a GPRS network when
you switch the phone on. Starting a WAP or PC
dial-up application created the connection
between phone and network and data transfer is
possible. When you end the application, GPRS
connection is ended but the registration to the
GPRS network remains.
When needed [Menu 4-6-2]
If you select this menu, the GPRS connection is
established when you connect a WAP service
and closed when you end the WAP connection.
Reset settings [Menu 4-7]
You can initialize all factory defaults. You need
Security code to activate this function.
B2100 User Guide 45
B2100_ENG_0622.qxd 2005.6.22 3:3 PM Page 45