User manual

9
Place a Test Call
Place a test call from your connected home phone. Make
sure to dial the 10-digit phone number, including area code.
For best results, place the cordless phone base at least 12
inches from the Wireless Home Phone device.
Note: Keep your cordless phone plugged into a power outlet.
Set up Voicemail and Additional Phones
Voicemail is included with your service. Dial “1” to set up and
access. If you choose to use an answering machine instead,
set it to fewer than 4 rings. To place phones throughout your
home, use a cordless phone system with multiple handsets.
Wall jacks are not used with Wireless Home Phone.
Useful Tips
• Transferring a phone number can take about four days, so you
should keep a phone plugged into your wall jack to receive calls
on your old service (including 911) until your transfer completes.
However, you can make calls immediately on your Wireless
Home Phone device. Check transfer status at att.com/port.
• The “Phone 2” port can be used to connect an additional
phone or stand-alone answering machine. It uses the same
phone number as the “Phone 1” port.
• Your AT&T Wireless Home Phone device does not support
incoming or outgoing fax service.
• Your AT&T Wireless Home Phone device does not support
rotary or pulse-dialing phones.