User guide

GP4
eng
If the following symptoms occur, please carry out the checks and adjustments
described below. There may be no malfunction.
HOMESettingsSUPPORTSignal Test
Shows the MUX and Service information etc. If you select Antenna & Satellite or
Cable & Satellite, a signal test only for Antenna or Cable is displayed.
General
Problem Solution
Cannot view certain
programmes.
• Adjust the location or orientation of the antenna.
• Save the programmes you wish to view later using Auto
Tuning or Programme Edit.
There is a delay after the
TV is switched on before
the image is fully visible.
• This is not a problem. Image noise that may occur when
the TV is first switched is being cleaned up.