SMART TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending upon the Operating System (OS).
Network Settings ENGLISH Premium Apps are pre-installed on the TV. These may vary by country. Depending upon the version of the software, icon position can be changed. 1 Press the (Home) button to access the Home menu. Select (Settings) and press Wheel (OK). 4 If the connection is completed, Connected to Internet is displayed.
Troubleshooting Network Problems 1 Press the (Home) button to access the (Settings) and press Home menu. Select Wheel (OK). 2 Select the Network Wired Connection (Ethernet) or Wi-Fi Connection Advanced Settings. NETWORK Quick Picture TV Name Quick Picture LG Smart TV Sound Wired Connection (Ethernet) Network Wi-Fi Direct General LG Connect Apps WI-FI iptime_xu.ji iptime_ungkee.choi iptime_sungho.jo iptime_seungjun.
Installation & Setting ENGLISH Install the SmartShare PC SW program on your PC. 1 Go to www.lg.com . Then, select your region. 2 Select SUPPORT. Then, search for your model. 3 Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW. 4 Download the SmartShare PC SW and Install it on your PC. You can run the program when installation is complete. NOTE SmartShare service is only available if TV and other devices are connected via a single AP (Router).
Updating the TV Firmware GENERAL Quick Picture ABOUT THIS TV Quick Language Picture Location Sound Time & Date Motion Recognition Home/Store Mode Model Safety SIMPLINK General xxxxxxxx LG Smart TV webOS Version x.x~xxx-xx User Agreements Safety Open Source Software Notice Set ID : 1 Reset to Initial Settings About This TV LG Smart TV Serial Number Device Name Eco Mode Accessibility Allow Automatic Updates Sound Network Launch Account Management General xx.xx.
Wi-Fi Direct Setting ENGLISH (Home) (Settings) Network Wi-Fi DIRECT If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct. 1 If Wi-Fi Direct is set to On, a list of available devices appears. Select your device.
Miracast Setting (Home) Screen Share 1 Miracast should be set to ON on your portable device. 2 When your TV is detected, select the device on your portable device. When connection is completed, the TV screen appears on the device screen. WiDi (Wireless Display) Setting Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet network for mirrored and dual monitor display on your TV.