OWNER’S MANUAL LED LCD TV / LCD TV PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. MODEL LCD TV MODELS 32LD550 47LD650 42LD550 55LD650 46LD550 52LD550 60LD550 SERIAL P/NO : SAC34134203 (1007-REV08) The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. 10 Heed all warnings. Follow all instructions. 1 Do not use this apparatus near water. 2 Clean only with dry cloth. 3 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
SAFETY INSTRUCTIONS 15 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
28 Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’reviewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV. 29 Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity.
Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea.
CONTENTS WARNING / CAUTION............................2 SAFETY INSTRUCTIONS........................3 CONTENTS.......................................................6 FEATURE OF THIS TV...............................9 PREPARATION Accessories............................................................10 Optional Extras...................................................... 11 Front Panel Information..................................... 12 Back Panel Information......................................
NETCAST Netcast Menu..................................................... 123 YOUTUBE............................................................ 124 PICASA................................................................ 126 PICTURE CONTROL Picture Size (Aspect Ratio) Control............. 128 Picture Wizard.................................................... 130 ꕊ Energy Saving............................................. 132 Preset Picture Settings (Picture Mode)......
FEATURE OF THIS TV ꔛ Some of these features are not available on all models. High-definition television. Highresolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080p, 1080i, and 720p resolutions. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
PREPARATION PREPARATION ACCESSORIES PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 1.5V 1.5V 1,5Vcc 1,5Vcc 1.5V 1.5V Owner’s Manual CD Manual, Nero MediaHome 4 Essentials CD Remote Control, Batteries (AAA) 1.5V 1.5V Option Extras Not included with all models * Wipe spots on the exterior only with the polishing cloth.
(For 32/42LD550) x8 1.5V 1.5V 1,5Vcc 1,5Vcc (M4 x 20) Screws for stand assembly (Refer to P.22) Protection Cover (Refer to P.23) Screw for stand fixing (Refer to P.
PREPARATION FRONT PANEL INFORMATION PREPARATION ꔛ Image shown may differ from your TV. 50/6OK750 Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. SPEAKER INPUT PUT MENU MENU ENTER VOL CH Touch Button You ENTER can operate the button VOL just by touching the buttonCH lightly with your finger.
PREPARATION 32/42/46/52/60LD550 CHANNEL (ꕌ,ꕍ) Buttons CH CH CH VOLUME (+, -) Buttons VOL VOL ENTER SPEAKER Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.►p.
PREPARATION PREPARATION ꔛ Image shown may differ from your TV. 47/55LD650 CH CH VOL VOL CHANNEL (ꕌ,ꕍ) Buttons VOLUME (+, -) Buttons ENTER CH MENU INPUT ENTER ENTER Button MENU MENU Button INPUT SPEAKER INPUT Button VOL POWER Button ENTER MENU INPUT Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.►p.
PREPARATION 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 42/47/55LX6500 Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.►p.142) SPEAKER Emitter (For 42/47/55LX6500) CH VOL ENTER It is the part equipped with the emitter exchanging signal with 3D glasses. Please be careful not to block the screen with objects or people while watching a 3D Video.
PREPARATION PREPARATION ꔛ Image shown may differ from your TV. 47/55LE8500 Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions SPEAKER CH VOL CH CHANNEL (ꕍ,ꕌ) Buttons OL ENTER 16 ENTER MENU INPUT Touch Button You can operate the button just by touching the button lightly with your finger.
USB IN 2 USB IN 2 USB IN 1 DVI IN 4 12 SERVICE ONLY USB IN 2 RS-232C IN (CONTROL & SERVICE) VIDEO L(MONO) AUDIO R VIDEO L(MONO) AUDIO R 50/60PK750 DVI IN 4 Image shown may differ from your TV.
PREPARATION 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500 PREPARATION USB IN 2 12 /DVI IN 3 2 Y PB PR L R 1 ? ANTENNA/ CABLE IN RS-232C IN /DVI IN 8 3 7 VIDEO L(MONO) AUDIO R AV IN 1 COMPONENT IN (RGB/DVI) OPTICAL DIGITAL 2 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, AUDIO IN AUDIO OUT 47/55LE8500 ꔡ 1 WIRELESS 2 CONTROL 1 2 3 P4B Y PR L R 1 RS-232C VIDEOIN RGB IN (PC) AUDIO (SERVICE ONLY) ANTENNA/ CABLE IN /DVI IN LAN 3
2 3 4 5 6 LAN Network connection for Netflix, Yahoo! TV Widgets, etc (for USA). Also used for video, photo and music files on a local network. HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUDIO IN (RGB/DVI) 0.32 cm (1/8 inch) headphone jack for analog PC audio input.
PREPARATION STAND INSTRUCTIONS (For 50/60PK750) PREPARATION ꔛ Image shown may differ from your TV. INSTALLATION (For 50PK750) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. STAND BODY 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. M5 x 14 20 3 Assemble the TV as shown. 4 Install the 4 screws into the holes shown.
PREPARATION DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 50PK750 2 Remove the screws that hold the stand on. M4 x 28 3 60PK750 M4 x 30 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. When installing the wall mounting bracket, use the PROTECTION COVER.
PREPARATION STAND INSTRUCTIONS (For 32/42/46/52/60LD550, 47/55LD650) PREPARATION ꔛ Image shown may differ from your TV. INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. AC IN CABLE MANAGEMENT AC IN 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. STAND BODY M4X20 M4 x 20 STAND BASE AC IN CABLE MANAGEMENT AC IN 3 Assemble the TV as shown. 4 Install the 4 screws into the holes shown.
PREPARATION DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. AC IN CABLE MANAGEMENT AC IN AC IN 2 Remove the screws that hold the stand on. CABLE MANAGEMENT AC IN CABLE MANAGEMENT 3 Detach the stand from TV. AC IN AC IN CABLE MANAGEMENT CABLE MANAGEMENT PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION STAND INSTRUCTIONS PREPARATION (For 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500) ꔛ Image shown may differ from your TV. INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. At this time, tighten the screws that hold the STAND BODY on.
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the screws that hold the stand on. 3 Detach the STAND REAR COVER from TV. 4 Detach the stand from TV.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
PREPARATION ! ? ! ? ! NOTE ► Screw length needed depends on the wall mount used. For further information, refer to ? the instructions included with the mount. ► Standard dimensions for wall mount kits are shown in the table. ► When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. ► Do not use screws longer than the standard dimension, as they may cause damage to the inside to the TV.
PREPARATION CABLE MANAGEMENT PREPARATION ꔛ Image shown may differ from your TV. Plasma TV 1 After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. In case of the LAN cable, install as shown to reduce the electromagnetic wave.
Image shown may differ from your TV. AC IN 32/42/46/52/60LD550, 47/55LD650 1 AC IN Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. PREPARATION ꔛ AC IN AC IN 2 Open the CABLE MANAGEMENT CLIP as shown. AC IN AC IN CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
PREPARATION PREPARATION ꔛ Image shown may differ from your TV. 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500 1 Secure the power cord with the CABLE HOLDER on the TV back cover. It will help prevent the power cable from being removed by accident. CABLE HOLDER 2 After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables.
DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall. 10.1 cm (4 inch) 10.1 cm (4 inch) ! ! ? ? 10.1 cm (4 inch) PREPARATION ꔛ 10.1 cm (4 inch) CAUTION ► Ensure adequate ventilation by following the clearance recommendations. ► Do not mount near or above any type of heat source.
PREPARATION ATTACHING THE TV TO A DESK (For 32/42LD550, 32LE5400) PREPARATION ꔛ Image shown may differ from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand ! ! ? ? 1-Screw ( provided as parts of the product) Desk WARNING ► To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions.
ꔛ ꔛ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
USB IN IN 4 CABLE MANAGEMENT ANTENNA OR CABLE CONNECTION AV IN 2 USB IN 1 PREPARATION ꔛ 1. Antenna (Analog or Digital) RS-232C IN LAN Multi-family Dwellings/Apartments ꔡ (Connect to wall antenna socket) WIRELESS 1 RGB/DVI OPTICAL DIGITAL VIDEO L(MONO) AUDIO R AUDIO IN AUDIO OUT AC IN 2 /DVI IN Y CONTROL CABLE MANAGEMENT PB PR R L 1 AUDIO VIDEO AV IN 1 COMPONENT IN 2 IN 4 (SERVICE ONLY) IN (PC) Wall Antenna Socket or Outdoor Antenna without a Cable RGB Box Connections.
EXTERNAL EQUIPMENT SETUP ꔛ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ꔛ Image shown may differ from your TV. HD RECEIVER SETUP Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO 1, 2, or 3* jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red).
ANT IN ANT OUT S-VIDEO VIDEO OUTPUT SWITCH IN 4 COMPONENT IN3 AUDIO / Y PB PR USB IN 1 USB IN 2 R L AUDIO R L PR AV IN2 VIDEO / AUDIO H/P COMPONENT IN3 AUDIO / Y PB PR AV IN2 VIDEO / AUDIO H/P USB IN 1 USB IN 2 EXTERNAL EQUIPMENT SETUP 36 IN 4 EXTERNAL EQUIPMENT SETUP For LED LCD TV 1 2 PB Y
/DVI IN LAN 3 OPTICAL DIGITAL AUDIO IN AUDIO OUT 1 COMPONENT IN ꔡ VIDEO L(MONO) AUDIO R 2 WIRELESS CONTROL Y PB PR L R 1 AUDIO VIDEO AV IN 1 (RGB/DVI) 2 HDMI Connection 1 2 RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN LAN Connect the digital set-top box to HDMI/DVI IN 1, 2, 3, or 4 jack on the TV. 3 (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN ꔡ No separate audio connection is necessary. HDMI supports both audio and video.
EXTERNAL EQUIPMENT SETUP HDMI OUTPUT DVI to HDMI Connection 1 2 LAN 3 (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN ꔡ 1 WIRELESS CONTROL 2 Y PB Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV. VIDEO 2 Turn on the digital set-top box. ( Refer to the owner’s manual for the digital settop box.) Select the HDMI1, HDMI2, HDMI3, or HDMI4* input source on the TV using the INPUT button on the remote control.
DVD SETUP Component Connection 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1, 2, or 3* jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1, 2, or 3* jacks on the TV.
USB IN 2 USB IN 1 EXTERNAL EQUIPMENT SETUP ꔛ ꔛ ꔛ (SERVICE ONLY) ANT IN S-VIDEO VIDEO IN 4 LAN 3 (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN ꔡ L 1 WIRELESS CONTROL R AUDIO Turn on the DVD player, insert a DVD. ANT OUT OUTPUT SWITCH Select the AV1 or AV2 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions.
RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN LAN 3 AUDIO IN 1 COMPONENT IN ꔡ VIDEO L(MONO) AUDIO R AUDIO OUT 2 WIRELESS CONTROL Y PB PR L R 1 AUDIO VIDEO AV IN 1 (RGB/DVI) OPTICAL DIGITAL 2 HDMI Connection EXTERNAL EQUIPMENT SETUP 1. How to connect 1 LAN 3 (RGB/DVI) OPTICAL DIGITAL AUDIO IN No separate audio connection is necessary. HDMI supports both audio and video. (SERVICE ONLY) ꔡ 1 WIRELESS CONTROL VIDEO L(MONO) AUDIO R AUDIO OUT 2 Y PB PR L AUDIO VIDEO 2.
EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1 RS-232C IN Connect the RF antenna out socket RGB IN (PC) (SERVICE ONLY) /DVI IN of the VCR to the ANTENNA/CABLE LAN 3 IN socket on the TV. RGB/DVI OPTICAL DIGITAL AUDIO IN AUDIO OUT Connect the antenna cable to the RF 1 ꔡ 2 WIRELESSin socket of the VCR. antenna L R Y P P CONTROL B R 1 2. How to use ꔛ ꔛ 1 VIDEO L(MONO) AUDIO R 2 2 ANTENNA/ CABLE IN AUDIO VIDEO AV IN 1 COMPONENT IN EXTERNAL EQUIPMENT SETUP 1.
Y PB PR L R 1 AUDIO VIDEO COMPONENT IN3 AUDIO / Y PB PR Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ꔛ IN 4 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select the AV1 or AV2 input source on the TV using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect Video Game Set USB IN 2 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) ꔛ ꔛ Select the AV1 or AV2 input source on the TV using the INPUT button on the remote control. Operate the corresponding external equipment. IN 4 2.
ꔛ USB IN 1 2. How to use IN 4 onnect the USB device to the USB C IN 1 or 2 jack on the side of TV. After connecting the USB IN jack, you use the USB function. (►p.97) VIDEO L(MONO) AUDIO R H/P 1 or Memory Key EXTERNAL EQUIPMENT SETUP 1.
EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP (FOR LED LCD TV/LCD TV) You can listen to the sound through the headphone. ! ? 46 1 Plug the headphone into the headphone socket. 2 To adjust the headphone volume, press the VOL +/- button. If you press the MUTE button, the sound from the headphone is switched off. ! NOTE ► AUDIO menu options are disabled when connecting a headphone. ► W ? hen changing AV MODE with a headphone connected, the change is applied to video but not to audio.
AUDIO OUT CONNECTION 1. How to connect LAN !! Connect one end of the optical cable to the TV port of OPTICAL DIGITAL AUDIO OUT. 2 Connect the other end of the optical cable to the digital audio input on the audio equipment. 3 Set the “TV Speaker option - Off” in the AUDIO menu. (►p.150). See the external audio equipment instruction manual for operation.
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT WIRELESS CONNECTION (OPTIONAL EXTRAS, EXCEPT 42/42LE5350) EXTERNAL EQUIPMENT SETUP LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately. When you connect the wireless ready dongle (included with the media box) to the TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
PC SETUP This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV's settings. 1. How to connect RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN LAN 3 2 Connect the VGA output of the PC to the RGB IN (PC) jack on the TV. 2 ꔡ AUDIO IN 1 WIRELESS CONTROL ꔛ AUDIO OUT 2 Y PB PR L R 1 Connect PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. AUDIO VIDEO 2. How to use ꔛ VIDEO L(MONO) AUDIO R Turn on the PC and the TV.
EXTERNAL EQUIPMENT SETUP RGB OUTPUT AUDIO DVI to HDMI Connection 1 LAN 2. How to use ꔛ ꔛ 3 Connect the DVI output of the PC to the HDMI/ DVI IN 1, 2, 3, or 4* jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN 1 WIRELESS CONTROL VIDEO L(MONO) AUDIO R AUDIO OUT 2 Y PB PR L R 1 VIDEO 1 2 Turn on the PC and the TV.
! ! NOTE ? ►Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. ? ►In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. ►Avoid keeping a fixed image on the screen for a long period of time.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode EXTERNAL EQUIPMENT SETUP Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768. PICTURE ꔂ Move ꔉ Enter SCREEN Resolution • Color 60 • Tint 0 R G • Color Temp. 0 W C • Advanced Control • Picture Reset Position Size • TruMotion • Screen (RGB-PC) Auto Config.
Auto Configure Screen Reset (Reset to original initial values) Returns Position, Size, and Phase to the default initial settings. This feature operates only in RGB-PC mode. PICTURE ꔂ Move ꔉ Enter • Color 60 • Tint 0 R G • Color Temp. 0 W C • Advanced Control • Picture Reset ꔉ ꔀ • LED Local Dimming : On 1 2 3 4 5 MENU Select PICTURE. ꔂ Move Select Screen (RGB-PC). ENTER Select Auto Config. or Reset. ENTER Select Yes. SCREEN Resolution Auto Config. Auto Config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE ꔂ Move SCREEN ꔉ Enter • Color 60 • Tint 0 R G • Color Temp. 0 W C • Advanced Control • Picture Reset ꔂ Move � Prev. Resolution ▲ Auto Config.
NETWORK SETUP Wired Network Connection RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN LAN WIRELESS CONTROL 3 (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN 1 VIDEO L(MONO) AUDIO R AUDIO OUT 2 Y PB PR L R 1 VIDEO Broadband modem Broadband Service AUDIO AV IN 1 COMPONENT IN ꔡ 1 EXTERNAL EQUIPMENT SETUP This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
EXTERNAL EQUIPMENT SETUP Wired Network Setup If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For detail information, contact your internet provider or router manual.
! ► For more information about NETCAST setup and troubleshooting, visit http://lgknowledge? base.com. Search for NETCAST. ► Use a standard LAN cable with this TV. Cat5 or better with a RJ45 connector. ► Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
EXTERNAL EQUIPMENT SETUP Wireless Network Connection (Except 42/47LE5350) VIDEO L(MONO) AUDIO R H/P IN 4 USB IN 1 USB IN 2 EXTERNAL EQUIPMENT SETUP The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect to a wireless lan network. The network configuration and connection method may vary depending on the equipment in use and the network environment.
Wireless Network Setup (Except 42/47LE5350) Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. ꔂ Move • Network Setting : Wired • Network Status : Internet is connected ꔉ Enter Network Type Wired network is recommended • Legal Notice • ESN Selecting the wireless network setting type Previous setting value exists. Do you want to connect with the previous setting? Wired Enter Wireless Resetting Select the wireless network setting type.
EXTERNAL EQUIPMENT SETUP When a security code is already set PIN (Personal Identification Number) EXTERNAL EQUIPMENT SETUP If you want to connect the AP (Access Point) or router with PIN, use this feature. Selecting AP Connecting with PIN mode Select AP you want to connect. Page 1/1 Insert PIN number at the AP webpage and press ‘Connect’ button. Input the new SSID PIN NUBMER : 12345670 iptime Connect ASW Access Point Search Network1 For more information, check the AP manual.
AD-hoc Mode This is the method of communicating directly with the machine to communicate without AP. This is the same as connecting two PCs with a cross cable. Setting Ad-hoc network Setting Ad-hoc network Select the wireless network setting type. Insert the setting information into the device. Features using exiting network can be unavailable.
EXTERNAL EQUIPMENT SETUP Network Status EXTERNAL EQUIPMENT SETUP NETWORK ꔂ Move Network Status ꔉ Enter TV • Network Setting : Wired • Network Status : Internet is connected Network connecting • Legal Notice • ESN Setting Test Close Select the wireless network setting type. Network Setting Select the wireless network setting type. Select the IP setting mode. IP Mode ◀ IP Auto Setting ▶ �IP Address 255 . 255 . 0 . 0 �Subnet Mask 255 . 255 . 0 . 0 �Gateway 255 . 255 . 0 .
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. The remote control may differ from the images below. Turns the TV on from standby or off to standby. LIGHT Illuminates the remote control buttons. (Except 32/42/46/52/60LD550, 47/55LD650) ENERGY SAVING Adjusts the Energy Saving setting.
TV TV SAVING 1 SAVING 2 ABC 3 DEF 1 4 GHI 5 JKL 6 MNO 4 GHI 5 JKL 6 MNO WATCHING TV / CHANNEL CONTROL 7 8 9 PQRS LIST TUV FLASHBK MARK FAV VOL CHAR/NUM CH RATIO DELETE P A G E MENU MUTE MENU Q.MENU ENTER WATCHING TV / CHANNEL CONTROL 1 Select the desired NETCAST menu source. ►p.123 Q.MENU Opens the list of Quick Menu options. ►p.
Simple Remote Control (For 42/47/55LE7500, 47/55LE8500) POWER VOL TV/INPUT CH TV/INPUT VOLUME UP/ DOWN MUTE CHANNEL UP/DOWN Rotates through inputs. Also switches the TV on from standby. ►p.83 Adjusts the volume. Switches the sound on or off. ►p.66 Changes the channel. NUMBER button FLASHBK — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tunes to the last channel viewed.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the / I, INPUT, CH (ꕌ or ꕍ) button on the TV or press the , INPUT, CH (ꕌ or ꕍ), Number (0-9) button on the remote control. ꔛ WATCHING TV / CHANNEL CONTROL ! 2 Select the viewing source by using the INPUT button on the remote control. 3 When finished using the TV, press the POWER button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. ꔛ ꔛ Step 1. Selecting Language 1 WELCOME! Select Menu Language. Thank you for choosing LG Step 1. Language 2 English ENTER WATCHING TV / CHANNEL CONTROL ꔛ Default selection is “Home Use”.
WATCHING TV / CHANNEL CONTROL Step 3. Power Indicator (For LED LCD TV) 1 Step 3. Power Indicator Standby Light ◀ Off WATCHING TV / CHANNEL CONTROL ꕉ Previous ▶ 2 ꔉ Next ꔛ Select On or Off. ENTER This function is disable in “Step2. Mode Setting - Store Demo”. Step 4. Time Zone 1 Select Time Zone option. Step 4. Time Zone Time Zone ◀ Daylight Saving Eastern ▶ Auto ꕉ Previous ꔉ Next 2 3 Select Daylight Saving option. ENTER Step 5. Auto Tuning Step 5.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 Display each menu. ENTER Select a menu item. CHANNEL CHANNEL 4 Accept the current selection. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL NETWORK ꔂ Move • Network Setting : None • Network Status : Not connected ꔉ Enter • Legal Notice NETWORK WATCHING TV / CHANNEL CONTROL • ESN Input List ꔂ Move TV USB1 USB2 AV 1 AV 2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 INPUT � Input Label MY MEDIA MY MEDIA Movie List Photo List Music List GAME GAME JUMP HOLE IN ONE WHACK A MOLE SAVING CRYSTAL INVADER URGENT SURVIVAL SUDOKU COOKING BURGER ꕯ Exit 70 ꕉ Exit ꔉ Enter
QUICK MENU our TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Y Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio A ▶ 16:9 � ꔣ Aspect Ratio: Selects your desired picture format. ꕇ Picture Mode: Selects the desired preset picture setting. ꕈ Sound Mode: Selects the desired preset sound setting. ꔴ Multi Audio: Changes the audio language (Digital signal). ꔴ SAP: Selects MTS sound (Analog signal).
WATCHING TV / CHANNEL CONTROL CUSTOMER SUPPORT Software Update WATCHING TV / CHANNEL CONTROL You can update the TV with the latest software to enhance the product operation and/or add new features. You can update the software by connecting the TV directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your TV.
Picture Test/Sound Test This function is a customer support function that can execute picture and sound tests. ꔑ Picture Test □ Sound Test ? Do you have a problem in this test screen? □ Product/Service Info. □ Network Test Yes No Close □ Software Update □ Picture Test ꔑ Sound Test ? Do you have a sound problem in this screen? □ Product/Service Info. □ Network Test Close 1 MENU 2 3 4 BACK EXIT RED Select Customer Support. ENTER Select Picture Test or Sound Test. ENTER Select Yes.
WATCHING TV / CHANNEL CONTROL Product/Service Info. This function shows support and product information. Customer Service Center can differ by country. WATCHING TV / CHANNEL CONTROL 1 MENU 2 3 BACK EXIT RED Select Customer Support. ENTER Select Product/Service Info.. You can check the various product/Service infomation based on your model. Return to the previous menu. Return to TV viewing. Network Test Check the newtwork status.
SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. MENU 2 GREEN Select Simple Manual. Select the part of the manual you would like to see. RED Go to the Index page. BLUE Play the Simple Manual automatically or manually. EXIT Return to TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) WATCHING TV / CHANNEL CONTROL Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Auto Tuning memorizes only the channels available at the time.
Add/Delete Channel (Manual Tuning) When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal strength monitor to see the quality of the signal being received. ꔂ Move ꔉ Enter • Auto Tuning • Manual Tuning • Channel Edit CHANNEL • Auto Tuning ꔉ ꔀ • Manual Tuning • Channel Edit ꔂ Move ◀ ꔉ Enter ▶ DTV Select channel type and RF-channel number. 2 Channel DTV 2-1 • Signal Strength • Signal Quality 88% 88% Delete Close 1 2 3 MENU Select CHANNEL.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. WATCHING TV / CHANNEL CONTROL When a channel number is deleted, it means that you will be unable to select it using CH∧∨button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu.
FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. ◀ 3-1 DTV 4-1 P A G E CH ꔊꔋFavorite Ch. Group ▶ Group A DTV 1 1 7PQRS 8 TUV 9 WXYZ Select your desired channel. 0 2 ꔉ Select your desired favorite channel group from A to D. MARK FAV 3 YELLOW BLUE ꔅ Ch.Edit 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO CHAR/NUM ꔡ ꔅ Ch.Reg.
WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. Channel List WATCHING TV / CHANNEL CONTROL DTV 3-1 DTV 4-1 ꕉ Exit ꔒ ꔉ ꔡ This padlock is displayed when the channel is locked with parental control. ꔅ Ch.Edit Displaying Channel List 1 Display the Channel List. LIST BLUE Tune to the “CHANNEL menu - Channel Edit”. Selecting a channel in the channel list 1 2 Select a channel.
CHANNEL INFORMATION ꔖ DTV 8-1 CNN ꔀ Ch. Change ▶ Next ꔉ Watch 10:10 AM 11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V No information Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking, with regular and special guests.
WATCHING TV / CHANNEL CONTROL CHANNEL BRIEF INFORMATION Brief Info shows the present screen information. 1 WATCHING TV / CHANNEL CONTROL 2 ENTER Shows the current channel’s brief info screen. ENTER Return to TV viewing. 6 8-1 ꔖ DTV 1 4 CNN 5 Brief Info Title Test... 10:10 AM ꘋꔫ 11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ TV-PG D L S V Next - 11:40 AM News ꔥ ꔯ Caption : The program contains one or more caption services. Use the Q.MENU menu to select wanted Closed caption.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Input List ꔂ Move USB1 USB2 AV 1 AV 2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 INPUT ENTER ꔛ ꔛ ꔛ ꔛ ꔛ ꔛ ꔛ ꔛ Disconnected inputs are inactive (grayed out) ꕉ Exit Select the desired input source. ꔛ You can also select the desired input source in the INPUT menu. When new external device is connected, this popup menu is displayed automatically.
WATCHING TV / CHANNEL CONTROL INPUT LABEL This indicates which device is connected to which input port. WATCHING TV / CHANNEL CONTROL ie) C hange the input label using Blue button AV1 ◀ AV2 ◀ ▶ Component1 ◀ ▶ Component2 ◀ ▶ RGB-PC ◀ ▶ VCR Close 2 INPUT Select the desired input source. BLUE Select the label. BACK Return to the previous menu. 3 EXIT ꔂ Move ꔉ Enter ▶ ꔍ 1 84 Input List Input Label Return to TV viewing.
RESET TO FACTORY DEFAULT (INITIAL SETTING) This function resets the TV to factory default and erases all stored channels. ꔂ Move ꔉ Enter • Language • Caption • Caption 3 4 ꔉ ꔀ ! • Initial Setting • Set ID :1 • Set ID :1 • Mode Setting : Home Use • Mode Setting : Home Use MENU Select OPTION. ꔛ ENTER Select Initial Setting. ꔛ ENTER Select Yes.
WATCHING TV / CHANNEL CONTROL MODE SETTING Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. WATCHING TV / CHANNEL CONTROL OPTION ꔉ Enter • Language • Caption OPTION ꔂ Move • Language : Off • Caption • Power Indicator • Initial Setting • Set ID :1 • Mode Setting : Home Use ꔠ ꔉ ꔉ Enter i Selecting the environment. Choose the setting mode you want.
DEMO MODE Displays a slide show to explain the various feature of this TV. OPTION ꔂ Move ꔉ Enter • Caption ꔂ Move ꔉ Enter • Language : Off • Caption • Power Indicator i Selecting the environment. Choose the setting mode you want. : Off • Power Indicator • Initial Setting • Initial Setting • Set ID :1 • Mode Setting : Home Use ꔠ ꔉ Select [Store Demo] for in-store dsplay. For use in-home, select [Home Use].
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. WATCHING TV / CHANNEL CONTROL 1 AV MODE 2 Off Cinema / ꔧ Cinema Game Sport Press the AV MODE button repeatedly to select the desired source. ꔛ ENTER ꔛ ꔛ ꔛ ꔛ ꔛ 88 If you select “Cinema / ꔧ Cinema” in AV mode, Cinema / ꔧ Cinema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.
GAME Allows you to enjoy the games installed on the TV. GAME JUMP HOLE IN ONE WHACK A MOLE SAVING CRYSTAL INVADER URGENT SURVIVAL SUDOKU COOKING BURGER ꕯ Exit 1 2 3 MENU Select GAME. ENTER Select the desired game. ENTER Enter the selected game mode. 4 EXIT WATCHING TV / CHANNEL CONTROL GAME Return to TV viewing.
WATCHING TV / CHANNEL CONTROL SIMPLINK SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus. WATCHING TV / CHANNEL CONTROL ◀ On 2 ◀ DISC 1 ▶ ◀ VCR 1 ▶ HDD/DVD-R HD HT TV Speaker 2 3 4 5 Select On. 3 HDD Recorder ◀ Speaker Display SIMPLINK menu.
SIMPLINK Functions ꔛ ꔛ Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device: Enables you to select one of the AV devices connected to the TV. ! ? ! NOTE WATCHING TV / CHANNEL CONTROL Disc playback: Control connected AV devices by pressing the ꕌꕍ< >, ENTER, ꕖ, ꕗ, ꕘ, ꕚ and ꕙ buttons. ꔛ Power off all devices: When you power off the TV, all connected devices are turned off.
3D 3D IMAGING IMAGING (FOR 42/47/55LX6500) 3D TECHNOLOGY ! This ! TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. You need such a device to watch the TV in 3D. The 3D TV displays two separate pictures formatted for each eye. The viewer needs to wear 3D glasses in order to see these images in 3D format.
! ! ? ? When using 3D Glasses ►3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions. ►Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles. ►Do not store the 3D glasses in hot or cold locations. ►Do not drop objects onto the 3D glasses. Do not drop or bend the glasses. ►Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.
3D IMAGING WATCHING 3D IMAGING 1 Play the video produced in 3D. Refer to the following for the supported imaging. Signal Resolution 720p 1280x720 Horizontal Vertical Frequency (kHz) Frequency (Hz) 3D IMAGING 33.75 HDMI Input 60 1080p 1920X1080 DTV Top & Bottom, Side by Side 67.50 Top & Bottom, Side by Side, Checker Board Single Frame Sequential 27.00 24 Top & Bottom, Side by Side, Checker Board HDMI (V. 1.4 with HDMI 3D) Frame Packing 33.
3 ENTER or L/R SELECT Select Setting Left/Right. 4 Put on 3D glasses. Sit 2 meters from TV to enjoy the best 3D view. (To select more comfortable view for you, change to left/right image of glasses with ꔅ button.) ENTER ꔅ Setting Left/Right ꔑ Left/Right □ Right/Left 3D ꕯ Exit ꔅ Setting Left/Right End 3D Video 5 ! ? End 3D Video 3D The 3D imaging mode is changed to the 2D imaging mode. 3D IMAGING ꔉ Enter 3D Select Left/Right or Right/ Left.
MY MY MEDIA MEDIA ENTRY MODE The My Media menu will open automatically when you insert a USB drive. My Media can also be accessed by choosing My Media in the user menu. After choosing the desired type of media, choose a device to open files from. The options are: USB device, or DLNA. Please select the device. USB Label MY MEDIA USB Label MY MEDIA DLNA Movie List Photo List Music List � Device Selection ꔅ Search 1 2 3 MENU Select MY MEDIA. ENTER Select Movie List, Photo List or Music List.
CONNECTION METHOD USB Connection Memory Key Precautions when using the USB device ►Only a USB storage device is recognizable. ►Connecting a USB storage device through a USB hub is not supported. ►A USB storage AV IN 2 device which uses its own driver may not be recognized. ►The recognition speed of a USB storage device may depend on each device. ►Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
MY MEDIA DLNA About DLNA MY MEDIA This TV can display and play many types of movie, photo and music files from your DLNA server and has been certified by DLNA for photos. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through a wired or wireless network in the home.
Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. 1 Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive. An installation wizard will walk you through the quick and uncomplicated installation process. 2 Close all Microsoft Windows programs and exit any anti-virus software that may be running. 3 Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive.
MY MEDIA Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. MY MEDIA 100 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. 2 Click Network icon on the left and define your network name in the Network name field. The Network name you enter will be recognized by your TV. 3 Click Shares icon on the left. 4 Click Local Folders tab on the Shared screen. 5 Click Add icon to open the Browse Folder window.
Playing back shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. 1 Start the server on your computer or other device that connected on your home network. 2 3 ! ? Select MY MEDIA. ENTER Select Movie List, Photo List or Music List. ENTER Select the DLNA. Depending on the media server, this TV may need to get the permission from the server. If you want to re-scan available media server, press blue color button.
MY MEDIA MOVIE LIST It displays all of the video files it recognizes. The On-Screen Display on your model may be slightly different. Supported movie file ꔛ Resolution: under 1920 pixel (width) x 1080 pixel (height) ꔛ Frame Rate: under 30 frame/sec (1920x1080), under 60 frame/sec (1280x720) ꔛ Max bitrate of playable video file: 20 Mbps (Mega bit per second) ꔛ Bit rate of audio format: within 32 kbps to 320 kbps (MP3) ꔛ Supported external subtitle format: *.smi/*.srt/*.sub(MicroDVD,Subviewer1.0/2.0)/*.ass/*.
Supported Video Formats File Extensions .asf .wmv Audio/ Video Codec VC-1 Advanced Profile Advanced Profile@Level 3 (e.g. 720p60, 1080i60, 1080p30) VC-1 Simple and Main Profiles Simple Profile@Medium Level (e.g. CIF, QVGA) Main Profile@High Level (e.g. 1080p30) Video Audio Profile/Level Support Explanation Only streams compliant to SMPTE 421M VC-1 standard are supported. WMA Standard WMA 9 Professional DivX3.11 Video .divx .avi MY MEDIA Main Profile@ Level 4.1 High Profile@ Level 4.1 (e.g.
MY MEDIA Screen Components 1 MENU 2 Select MY MEDIA. ENTER Select Movie List. ENTER 1 1 2 3 MY MEDIA 4 5 Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on 1 Current page/ total pages of contents 2 Page 1/1 Movie List Drive1 USB 1 XTICK M1 Page 1/1 M2 M3 M4 Butterfly_... 01:34:33 4 � Move Abnormal files are displayed using this graphic.
Movie Selection Page 1/1 Movie List 1 Drive1 USB 1 XTICK M1 M2 M3 M4 2 ENTER 3 ENTER Butterfly_... 01:34:33 � Move ꔅ To Photo List � Play ꔅ Change Numbers � Page Change ꔅ Mark Mode Select the desired movie title. Play the movie file. � Mark ꕯ Exit ꔛ Use the CH (ꕌꕍ) button to navigate in the movie page. Mark Mode Mark Mode Drive1 USB 1 XTICK M1 1 Page 1/1 Movie List M2 Select the target folder or drive. Page 1/1 M3 2 M4 ENTER Butterfly_...
MY MEDIA Playing the Movie Choose options. Set Video Play. Set Video. Set Audio. Set 3D video � MY MEDIA 1 Close �� � � � 01:02:30 / 02:30:25 � � � � Option � Hide Show the Option menu. Q.MENU 2 ENTER Select the desired menu option. ꕯ Exit ! ? For 42/47/55LX6500 ! NOTE ► When replaying a video file after stopping, you can play from where it stopped automatically.
Set Video Play Menu Options Set Video Play. ◀ Full ▶ Audio Language ◀ 1 ▶ Subtitle Language ◀ On ▶ • Language ◀ English ▶ • Code Page ◀ Default ▶ • Sync ◀ 0 ▶ • Position ◀ 0 ▶ • Size ◀ Normal ▶ Repeat ◀ Off ▶ ꔛ � Previous ꔛ 1 2 Select Picture Size, Audio Language, Subtitle Language, or Repeat. ꔛ Make appropriate adjustments.
MY MEDIA * Image shown may differ from your TV. Set Video Menu Options For LED LCD TV/LCD TV For Plasma TV Set Video. Set Video. ◀ Picture Mode Standard ▶ Picture Mode • Backlight 70 ◀ ▶ • Contrast • Contrast ◀ 100 ◀ ▶ 100 ◀ ▶ • Brightness 50 ◀ ▶ • Brightness 50 ◀ ▶ • Sharpness 50 ◀ ▶ • Color 60 ◀ ▶ • Color 60 ◀ MY MEDIA ◀ Medium ▶ • Tint 0 ◀ • Edge Enhancer ◀ High ▶ • Color Temp.
PHOTO LIST The On-Screen Display on your model may be slightly different. Supported photo file: *.JPG ꔛ Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height) ꔛ Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height) ꔛ You can play JPEG files only. ꔛ Non-supported files are displayed in the form of predefined icon. ꔛ An error message occurs for corrupted files or file formats that cannot be played.
MY MEDIA Photo Selection USB 1 XTICK Drive1 � Move MY MEDIA ꔅ Change Device 1 Page 1/1 Photo List ꔅ To Music List ꔅ Change Numbers Page 1/1 � View � Page Change ꔅ Mark Mode � Mark Select the target folder or drive. 2 ENTER 3 ENTER ꔛ ꕯ Exit Select the desired photos. Photo file is displayed. Use the CH (ꕌꕍ) button to navigate in the photo page. Mark Mode 1 Page 1/1 Photo List Mark Mode Drive1 USB 1 XTICK Page 1/1 2 3 Select the target folder or drive.
Full Screen Menu More operations are available in full screen mode. Page 1/1 Photo List USB 1 XTICK Drive1 Page 1/1 � Move ꔅ To Music List � View ꔅ Change Numbers � Page Change ꔅ Mark Mode � Mark MY MEDIA ꔅ Change Device ꕯ Exit 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◀ ▶ ◀ Slideshow � 1 BGM � � 2/13 ꕲ � The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. ▶ � Option � Hide Select the target folder or drive.
MY MEDIA 4 01_a.jpg 2008/12/10 1920 x 1080 479 KB ENTER Select the Slideshow, ◀ BGM, � (Rotate), ꕲ / ꕳ, � (Energy Saving), Option, or Hide. ▶ ꔛ MY MEDIA Slideshow � BGM � � ◀ 2/13 ꕲ � ▶ � Option � Hide Use < > button to select the previous or next photo. ꕯ Exit ► Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. ꔛ Set the time interval of the slide show in Option-Set Photo View.
Using the Photo List Function 01_a.jpg 2008/12/10 1920 x 1080 479 KB Choose options. Set Photo View. ◀ ▶ Set Video. Set Audio. Set 3D video Slideshow � 1 BGM � � 2/13 ꕲ � � Option Show the Option menu. Q.MENU 2 ENTER Close ▶ � Hide ! Select the desired menu option. ? Set Photo View Menu Options Set Photo View. Slide Speed ◀ BGM Fast ꕯ Exit For 42/47/55LX6500 MY MEDIA ◀ ! NOTE For 42/47/55LX6500 ► You cannot select the Option in 3D ? imaging mode.
MY MEDIA * Image shown may differ from your TV. Set Video Menu Options For LED LCD TV/LCD TV For Plasma TV Set Video. Set Video. ◀ Picture Mode Standard ▶ Picture Mode ◀ • Backlight 70 ◀ ▶ • Contrast 100 ◀ ▶ • Contrast 100 ◀ ▶ • Brightness 50 ◀ ▶ • Brightness 50 ◀ ▶ • Sharpness 50 ◀ ▶ • Color 60 ◀ ▶ • Color 60 ◀ ▶ MY MEDIA • Dynamic Contrast ◀ Medium ▶ • Tint 0 ◀ R G ▶ • Edge Enhancer ◀ High ▶ • Color Temp.
MUSIC LIST This TV cannot play back copy-protected files. The On-Screen Display on your model may be slightly different. Supported Music File: *.MP3 Bit rate range: 32 Kbps - 320 Kbps • Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3: 16 kHz, 22.05 kHz, 24 kHz Screen Components MENU Select MY MEDIA. 2 ENTER Select Music List. ENTER 2 1 2 3 4 5 6 Preview: If any album jacket for the file (Album Art Image) exists, this picture is displayed.
MY MEDIA Music Selection Page 1/1 Music List Drive1 USB 1 XTICK 001. - B01.mp3 00:00 002. - B02.mp3 00:00 Page 1/1 003. - B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 � Move ꔅ Change Device ꔅ To Movie List ꔅ Change Numbers � Play � Page Change ꔅ Mark Mode 1 Select the target folder or drive. 2 ENTER 3 ENTER Select the desired music file. Music files are played. � Mark ꕯ Exit ꔛ MY MEDIA Use the CH (ꕌꕍ) button to navigate in the music page.
Using the Music List Function Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 Choose options. Set Audio Play. � � 001. - B01.mp3 00:00 002. - B02.mp3 00:00 � 002. - B02.mp3 � Q.MENU 2 � � � 003. - B03.mp3 00:00 004. - B04.mp3 00:00 �� � Play with Photo 005. - B05.mp3 00:00 02:30 / 03:25 � � Option � Hide Show the Option menu. ENTER Close Select Set Audio Play. or Set Audio.. ꕯ Exit ! ? ! NOTE MY MEDIA 1 � Set Audio.
MY MEDIA Set Audio Play Menu Options Set Audio Play. Repeat ◀ On ▶ Random ◀ Off ▶ � Previous MY MEDIA 1 2 Select Repeat or Random. Make appropriate adjustments. Set Audio Menu Options Set Audio. Sound Mode ◀ Standard ▶ Auto Volume ◀ Off ▶ Clear Voice II ◀ Off ▶ Balance 0 ◀ L R ▶ � Previous 1 2 118 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments.
ꔛ If you don't press any buttons for a while, the play information box will float across the screen. This prevents screen pixel damage due to a fixed image remaining on the screen for a extended period of time. 002. B02.mp3 � 00:31 / 04:04 ! NOTE ? ► A damaged or corrupted music does not play but displays 00:00 in playtime. ► Music files with copy-protection will not play. ? Press ENTER or � button to stop the screen saver.
MY MEDIA DIVX REGISTRATION CODE Using the registration number, movies can be rented or purchased at www.divx.com/vod. Only DivX files matched with the registration code of the purchased TV are playable. DivX Reg.Code MY MEDIA Deactivation Movie List MY MEDIA 1 2 3 4 ! ? 120 Music List � Previous You must register your device to play DivX protected videos. Registration code : xxxxxxxxxx Register at http://vod.divx.com Close Select MY MEDIA. MENU ENTER Photo List i BLUE Select DivX Option.
DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web server and are blocked from activating more devices. DivX VOD allows the consumer to activate up to 6 devices under one account. Delete the existing authentication information to receive a new DivX user authentication for TV. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. DivX Reg.
NETWORK NETWORK LEGAL NOTICE Legal Notice NETWORK ꔂ Move • Network Setting : Wired • Network Status : Internet is connected • Legal Notice page 1/3 ꔉ Enter ꔉ ꔀ • ESN IMPORTANT NOTICE RELATING TO NETWORK SERVICE All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use.
NETCAST NETCAST MENU These services are provided by separate Content Provider. NETCAST menu source can differ by country. What is a NETCAST? Stream movies, TV shows and video, or get up to the minute news, stock information or weather updates directly to your TV. To view the owner’s manual that provided by the Content Provider, visit our website at http://www.lg.com. To see the activation method of Yahoo!, Netflix, or Vudu, click the Yahoo!, Netflix, Vudu in the CD manual (For USA).
NETCAST YOUTUBE YouTube is a video sharing website where users can upload, view, and share video clips. Screen Components 1 2 YouTube menu Videos list 1 2 RED Set the option menu. NETCAST Return to Netcast menu. EXIT Return to TV viewing. NOTE ► When you press the Q.menu button while the Youtube video is playing in full mode, you can set the video options.
YouTube menu Home: You can watch the popular video in real time. Featured: The featured videos list will be displayed. Popular: The best rated videos list from YouTube server will be displayed. Most Viewed: The most viewed videos list will be displayed. Search: The keypad/keyboard menu will be displayed. History: The videos list that you previously played will be displayed. Maximum of 20 videos can be stored.
NETCAST PICASA Picasa is a photo organizing or sharing website where users can upload, view, and share photos. Screen Components 1 1 2 Picasa menu Photo list 2 NETCAST Navigate the desired photos. ENTER The selected photo file is displayed. Return to Netcast menu. EXIT 126 Return to TV viewing.
Picasa menu Home: The featured photos list will be displayed. Friends: You can register users with the pictures you want as friends. You can add up to 10 friends. Search: The keypad/keyboard menu will be displayed. My Photos: You can view the pictures uploaded to the Web. This function can only be used when you sign in. Sign in (Sign Out): Displays the keypad/keyboard menu to sign in or returns to the sign-out status.
PICTURE PICTURE CONTROL CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting, aux).
16:9 4:3 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Zoom Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to Low, Recommended or High, you can see the example of the changes you made. PICTURE • Aspect Ratio ꔂ Move ꔉ Enter Black Level Set the screen above identical to the Recommended sample below.
For LED LCD TV/LCD TV Backlight Color Set the screen above identical to the Recommended sample below. Low Recommended • Color 50 ◀ ꕉ Previous Set the Backlight to your Brightness preference. Dark High • Backlight ▶ ꔉ Next Recommended 30 ◀ ENTER ▶ ꕉ Previous ꔉ Next 11 8 Bright Adjust Color. ENTER Adjust Backlight. i.e) Complete Horizontal Sharpness Set the screen above identical to the Recommended sample below. � Move ꘁ Mark Select (an) input(s) to apply the settings.
PICTURE CONTROL ꕊ ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the Picture Mode.
PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE • Aspect Ratio ꔂ Move ꔉ Enter : 16:9 ꔠ • Picture Wizard 1 2 3 PICTURE CONTROL 4 5 ꔡ • Picture Mode : Standard • Backlight 70 • Contrast 100 • Brightness 50 • Sharpness 70 ꔉ ꔀ MENU Select PICTURE. ENTER Select Picture Mode. ENTER Select your desired menu option.
PICTURE IMPROVEMENT TECHNOLOGY (ADVANCED CONTROL) Advanced Control allows you to adjust some of the advanced features of your LG display. To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for each Picture Mode. PICTURE ꔂ Move ꔉ Enter PICTURE ꔂ Move • Color 60 • Tint 0 R G • Color Temp. 0 W C • Advanced Control ꔉ ꔀ • Tint 0 R Dynamic Contrast • Color Temp.
PICTURE CONTROL EXPERT PICTURE CONTROL � Expert1 and � Expert2 provide even more advanced picture settings for users. Typical used by professionals for calibrating the TV.
*This feature is not available for all models. ꔛ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ꔛ Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, and green look more vivid. Skin Color ꔛ It detects the skin area of video and adjusts it to express a natural skin color.
PICTURE CONTROL Edge Enhancer xvYCC Color Filter Expert Pattern ꔛ Show clearer and distinctive yet natural edges in the video. ꔛ This produces richer colors. This feature represents rich color as much as conventional video signal. This function is enabled in "Picture mode - Cinema / ꔧ Cinema / ꔧ Bright Room, ꕋ Expert" when a xvYCC signal is inputted through HDMI. ꔛ ꔛ ꔛ This function filters specific colors in the video. You can use the RGB filter to set color saturation and hue accurately.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE • Color G • Tint 0 R ? All picture settings will be reset. C • Color Temp. 0 W Continue? • Advanced Control 3 4 60 • Picture Reset • TruMotion : Low Yes • Color 60 • Tint 0 R G • Color Temp. 0 W C i • Advanced Control Resetting video configuration...
PICTURE CONTROL TRUMOTION - For LED LCD TV, LCD TV Advance video technology that provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture. PICTURE ꔂ Move ꔉ Enter • Color 60 • Tint 0 R G • Color Temp. 0 W C • Advanced Control • Picture Reset • TruMotion : Low TruMotion ◀ • Judder 5 • Blur 5 Low ▶ � Enter ꔉ ꔀ • Screen (RGB-PC) • LED Local Dimming : On 1 2 MENU ENTER Select PICTURE.
LED LOCAL DIMMING - For 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500 After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve the contrast ratio. This feature is disabled in “Picture Mode-Game”. PICTURE ꔂ Move ꔉ Enter PICTURE ꔂ Move • Color 60 • Color 60 • Tint 0 R G • Tint 0 R G • Color Temp. 0 W C • Color Temp.
PICTURE CONTROL POWER INDICATOR - For LED LCD TV, LCD TV Adjust the power/standby indicator light on the front of the TV. OPTION ꔂ Move ꔉ Enter • Language • Caption • Caption ꔉ ꔀ • Initial Setting PICTURE CONTROL 2 • Set ID :1 : Home Use • Mode Setting : Home Use Select Power Indicator. Select Standby Light or Power Light. Select your desired options. BACK EXIT 142 :1 • Mode Setting ENTER 5 ◀ Power Light • Set ID Select OPTION.
IMAGE STICKING MINIMIZATION (ISM) METHOD - For Plasma TV A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
SOUND SOUND &&LANGUAGE LANGUAGE CONTROL CONTROL AUTO VOLUME Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO ꔂ Move • Auto Volume : Off • Clear Voice II : Off � 3 ꔉ ꔀ • Balance 1 2 3 • Sound Mode : Standard ꔉ Enter 0 L R • Infinite Sound:Off • Treble 50 • Bass 50 • Bass 50 • Reset • Reset Select On or Off. Select Level. Make appropriate adjustments. Return to the previous menu.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO ꔂ Move 2 SOUND & LANGUAGE CONTROL 146 3 : Off • Auto Volume : Off : Off � 3 • Clear Voice II : Off � 3 0 L ꔀ R ꔉ : Standard • Sound Mode : Standard • Infinite Sound:Off • Infinite Sound:Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset • Reset Select Balance. ENTER Make appropriate adjustments. Return to the previous menu.
PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment using factory presets. AUDIO ꔂ Move 2 : Off • Auto Volume : Off • Clear Voice II : Off � 3 • Clear Voice II : Off � 3 0 L R ꔉ ꔀ • Balance • Sound Mode : Standard • Infinite Sound:Off • Treble 50 • Bass 50 • Reset • Sound Mode MENU Select AUDIO. ꔛ ENTER Select Sound Mode. ꔛ ENTER Select Standard, Music, Cinema, Sport, or Game.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO ꔂ Move • Clear Voice II • Balance • Sound Mode • TV Speaker 3 4 Yes : On MENU Select AUDIO. ENTER Select Reset. ENTER Select Yes. ENTER EXIT L R No Initialize the adjusted value. Return to TV viewing. ꔉ ꔀ ꔂ Move ꔉ Enter : Off � 3 • Balance 0 L R • Sound Mode : Standard • Infinite Sound:Off i Resetting audio configuration...
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers. AUDIO • Clear Voice II ꔂ Move • Balance 1 2 SOUND & LANGUAGE CONTROL 150 3 • Sound Mode : Standard 0 R • Balance 0 : Standard • Infinite Sound:Off • Infinite Sound:Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset • Reset • TV Speaker : On • TV Speaker : On ENTER Select TV Speaker. ENTER Select On or Off.
STEREO/SAP BROADCAST SETUP On analog signals, this TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. ◀ Multi Audio ▶ English � A ꕉ Exit 1 2 Digital TV Q.MENU Select SAP. ENTER Select Mono, Stereo, or SAP. 3 EXIT Return to TV viewing. 1 2 Q.MENU Select Multi Audio. ENTER Select other languages.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE This feature operates only in DTV/Cable DTV mode. OPTION ꔂ Move • Language • Caption ꔉ : Off • Power Indicator SOUND & LANGUAGE CONTROL 152 2 3 : Off • Set ID :1 • Mode Setting : Home Use • Mode Setting : Home Use Select Language. ENTER Select Audio Language. Select your desired language. EXIT • Caption • Initial Setting ENTER BACK • Language :1 Select OPTION.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION ꔂ Move ꔉ Enter • Language • Caption 1 2 ꔡ • Initial Setting • Initial Setting :1 • Set ID :1 • Mode Setting : Home Use • Mode Setting : Home Use Select Language. ENTER Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. EXIT : Off • Set ID ENTER BACK • Caption • Power Indicator Select OPTION.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Digital Broadcasting System Captions Choose the language you want the DTV/Cable DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION ꔂ Move ꔉ Enter • Language • Caption 1 3 ꔉ ꔀ • Power Indicator • Initial Setting • Initial Setting :1 • Set ID :1 : Home Use • Mode Setting : Home Use ENTER Select On. Select CC1-4, Text1-4, or Service1 - 6.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/Cable DTV captions that appear on your screen. This function in only available when Caption Mode is set On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. TIME ꔂ Move ꔉ Enter • Clock ꔉ • Off Time : Off • On TIme : Off • Sleep Timer : Off ꔡ TIME ꔂ Move ꔉ Enter • Clock ꔉ ◀ Manual • Off Time : Off Month • On TIme : Off Date • Sleep Timer : Off 2010 Hour 10 AM 10 Time Zone Eastern Daylight Saving Auto Close 2 3 TIME SETTING MENU Select TIME. ENTER Select Clock. ENTER Select Manual.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME ꔂ Move ꔉ Enter • Clock TIME ꔂ Move ꔉ Enter • Clock • Off Time : Off • Off Time : Off • On TIme : Off • On TIme : Off • Sleep Timer : Off ꔠ ꔉ • Sleep Timer ꔑ Off □ 10 min. : Off ꔉ □ 20 min. ꔉ ꔡ □ 30 min. □ 60 min. □ 90 min. □ 120 min. □ 180 min. □ 240 min. 1 2 3 MENU ENTER Select Sleep Timer. ENTER Make appropriate adjustments.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice.
Lock System Enables or disables the blocking scheme you set up previously.
PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Block Channel LOCK ꔂ Move ꔉ Enter • Set Password Favorite Group: DTV 3-1 • Lock System : On • Block Channel • Movie Rating • TV Rating-Children • TV Rating-General • Downloadable Rating • Input Block A TV page 1/1 Cable DTV Cable TV 5-1 7-1 ꔉ ꔀ ꔉ CH.
MOVIE & TV RATING Movie Rating (MPAA)- For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
PARENTAL CONTROL / RATINGS TV Rating Children - For USA revents children from watching certain children's TV programs, according to the ratings limit set. The P children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view.
PARENTAL CONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system.
TV Rating French - For CANADA Selecting Canadian French rating system.
PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data.
EXTERNAL INPUT BLOCKING Enables you to block an input.
PARENTAL CONTROL / RATINGS KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off.
APPENDIX TROUBLESHOOTING Abnormal Operation ꔛ The remote control doesn’t work ꔛ ꔛ ꔛ ꔛ TV turns off suddenly ꔛ ꔛ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Ensure that the correct remote operating mode is set: TV, VCR etc. *This feature is not available for all models. Install new batteries.
APPENDIX Audio Problems No output from one of the speakers Unusual sound from inside the product No sound when connecting HDMI/USB ꔛ Adjust Balance in menu option. ꔛ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. ꔛ Check High Speed HDMI cable. Check USB cable over version 2.0. Use normal MP3 file. *This feature is not available for all models.
Movie List Problems The file does not appear on the Movie List. Message is displayed saying “This file is invalid” or the audio is working normally but the video is not working normally. Message is displayed saying “Unsupported Audio” or the video is working normally but the audio is not working normally. ꔛ Check whether the file extension is supported. ꔛ Check whether the file is playing normally on a PC. (Check whether the file is damaged.) Check whether the resolution is supported.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 ere’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of H lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 32LD550 (32LD550-UB) 42LD550 (42LD550-UB) 800.0 mm x 563.0 mm x 207.0 mm (31.5 inch x 22.1 inch x 8.1 inch) 1024.0 mm x 695.0 mm x 261.0 mm (40.3 inch x 27.3 inch x 10.2 inch) 800.0 mm x 503.0 mm x 74.7 mm (31.5 inch x 19.8 inch x 2.9 inch) 1024.0 mm x 632.0 mm x 78.7 mm (40.3 inch x 24.8 inch x 3.0 inch) MODELS Dimensions (Width x Height x Depth) With stand Weight With stand 10.2 kg (22.4 lbs) 15.4 kg (33.9 lbs) Without stand 9.2 kg (20.2 lbs) 13.8 kg (30.
APPENDIX MODELS 1137.0 mm x 758.0 x 270.0 mm (44.7 inch x 29.8 inch x 10.6 inch) 1329.0 mm x 872.0 mm x 330.0 mm (52.3 inch x 34.3 inch x 12.9 inch) 1137.0 mm x 685.0 mm x 76.8 mm (44.7 inch x 26.9 inch x 3.0 inch) 1329.0 mm x 796.0 mm x 96.5 mm (52.3 inch x 31.3 inch x 3.7 inch) With stand Weight With stand 20.3 kg (44.7 lbs) 33.0 kg (72.7 lbs) Without stand 18.3 kg (40.3 lbs) 28.8 kg (63.
MODELS 60PK750 (60PK750-UA, 60PK750-UF) Dimensions (Width x Height x Depth) With stand 1184.0 mm X 801.0 mm X 309.7 mm (46.6 inch x 31.5 inch x 12.1 inch) 1402.8 mm X 935.3 mm X 383.9mm (55.2 inch x 36.8 inch x 15.1 inch) Without stand 1184.0 mm X 738.5 mm X 52.4 mm (46.6 inch x 29.0 inch x 2.0 inch) 1402.8 mm X 866.8 mm X 52.4mm (55.2 inch x 34.1 inch x 2.0 inch) Weight With stand 32.3 kg (71.2 lbs) 47.2 kg (104.0 lbs) Without stand 29.9 kg (65.9 lbs) 42.7 kg (94.
APPENDIX MODELS With stand 784.6 mm x 558.1 mm x 221.0 mm (30.8 inch x 21.9 inch x 8.7 inch) 1016.0 mm x 692.0 mm x 270.0 mm (40.0 inch x 27.2 inch x 10.6 inch) Without stand 784.6 mm x 499.5 mm x 39.9 mm (30.8 inch x 19.6 inch x 1.5 inch) 1016.0 mm x 630.0 mm x 29.3 mm (40.0 inch x 24.8 inch x 1.1 inch) Weight With stand 12.6 kg (27.7 lbs) 19.5 kg (42.9 lbs) Without stand 10.5 kg (23.1 lbs) 16.7 kg (36.
MODELS 42LE7500 (42LE7500-UC) 47LE7500 (47LE7500-UC) Dimensions (Width x Height x Depth) With stand 1018.2 mm x 693.5 mm x 269.8 mm (40.0 inch x 27.3 inch x 10.6 inch) 1128.6 mm x 758.9 mm x 284.4 mm (44.4 inch x 29.8 inch x 11.1 inch) Without stand 1018.2 mm x 630.7 mm x 29.3 mm (40.0 inch x 24.8 inch x 1.1 inch) 1128.6 mm x 693.3 mm x 29.8 mm (44.4 inch x 27.2 inch x 1.1 inch) Weight With stand 21.9 kg (48.2 lbs) 26.2 kg (57.7 lbs) 19.1 kg (42.1 lbs) 23.0 kg (50.
APPENDIX IR CODES *This feature is not available for all models. 1. How to Connect Lead code ꔛ High custom code Lead code Lead code Lead code Lead Leadcode code Lead code code Low custom Low code Lead Data code Data code Data code High custom High code custom code Data code Data code High custom code Data code Data code High Data Data Highcustom customcode code Datacode code Datacode code High custom Data code Data code High code 2.
Code Function Note Function Note 00 CH ꕌ Remote Control Button B0 ꕖ Remote Control Button 01 CH ꕍ Remote Control Button B1 ꕗ Remote Control Button 02 VOL + Remote Control Button BA ꕘ Remote Control Button 03 VOL - Remote Control Button D6 TV Discrete IR Code 06 > Remote Control Button 07 < Remote Control Button (Hexa) 08 (TV Input Selection) C4 POWER ON Remote Control Button (Power On/Off) 09 MUTE/DELETE Remote Control Button 0B INPUT Remote Control Button 0F
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ꔛ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.
RS-232C Configurations 7-Wire Configuration (Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’.
APPENDIX Command Reference List Transmission / Receiving Protocol Transmission COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power k a 00 - 01 02. Input Select x b ► P.187 03. Aspect Ratio k c ► P.187 04. Screen Mute k d 00 - 01 05. Volume Mute k e 00 - 01 06. Volume Control k f 00 - 64 07. Contrast k g 00 - 64 08. Brightness k h 00 - 64 09. Color k i 00 - 64 10. Tint k j 00 - 64 11. Sharpness k k 00 - 64 12. OSD Select k l 00 - 01 13.
01. Power (Command: k a) 05. Volume Mute (Command: k e) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * I n a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, TV will send the Acknowledge after power on processing completion.
APPENDIX 11. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13.
Data5: 7 6 5 Main/Sub Picture Two/One Part Channel Using Physical Channel 0 Main 0 Two 0 Use 1 Sub 1 One 1 No Use 4 Reserved 3 2 1 0 x 0 0 0 0 Step NTSC Air x 0 0 0 1 NTSC Cable x 0 0 1 0 ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 Reserved x x x x x ...
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
b) Y ou must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
MOZILLA PUBLIC LICENSE Version 1.1 --------------1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2. “Contributor version” means the combination of the original code, prior modifications used by a contributor, and the modifications made by that particular contributor. 1.3.
APPENDIX (c) t he licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. Contributor Grant.
(c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.5. Required notices. You must duplicate the notice in exhibit A in each file of the source code.
APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
OWNER’S MANUAL LED LCD TV / LCD TV PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. MODEL LCD TV MODELS 32LD550 47LD650 42LD550 55LD650 46LD550 52LD550 60LD550 SERIAL P/NO : SAC34134203 (1006-REV07) The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service.