User guide

46
ENG
ENGLISH
ENTERTAINMENT
Connecting to a wireless network
The LG Wireless LAN for Broadband/DLNA Adap-
tor, which is sold separately, allows the TV to con-
nect to a wireless LAN network.
The network configuration and connection method
may vary depending on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps and
network settings.
Setting up the AP (Access Point) or the wireless
router is required before connecting the TV to the
network. The easiest method is the WPS button
method (Third method in this section).
(Only 47/55LW95
**
, 47/55LW98
**
: Built-in the Wi-Fi Module, Unnecessary Wireless
LAN for Broadband/DLNA adaptor setup)
y If you want to access the Internet directly
on your TV, the broadband internet con-
nection should always be on.
y If you cannot access the Internet, check
the network conditions from a PC on your
network.
y When you use Network Setting, check
the LAN cable or check if DHCP in the
router is turned on.
y If you do not complete the network set-
tings, the network may not work properly.
NOTE
y For enjoying pictures, music, or video
stored on a PC using the router, a wired
connection is recommended.
y When the wireless port of the router is
used, there may be restrictions on some
functions.
y It is recommended that an Access Point
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote control may
not perform as expected due to frequency
interference.
NOTE