User manual

20
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Wired Network Setup
1
Select NETWORK.
2
Select Network Setting.
3
Select Wired.
4
If you already set Network Setting: Select Resetting. The new connection settings
resets the current network settings.
5
Select IP Auto Setting or IP Manual Setting.
When Selecting IP Manual Setting:
IP addresses will need to be input manually.
6
Select OK.
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
Network Status
Network connecting
Setting Test Close
NETWORK
OK
Move
• Network Setting : Wired
• Network Status : Internet is connected
• Legal Notice
• Network Setting : Wired
►
Network Type
Wired network is recommended
Wired
Wireless
If you already set
the Network Setting
Previous setting value exists. Do
you want to connect with the
previous setting?
OK
Resetting
ꔉ Next
Exit
IP Auto Setting
IP Manual Setting
Network Setting
Insert the IP address.
IP Mode
◄ IP
Manual Setting ►
● IP Address 255 . 255 . 0 . 0
● Subnet Mask 255 . 255 . 0 . 0
● Gateway 255 . 255 . 0 . 0
● DNS Server 255 . 255 . 0 . 0
OK
Exit
Network Setting
Select the IP setting mode.
IP Mode
◄ IP
Auto Setting ►
● IP Address 255 . 255 . 0 . 0
● Subnet Mask 255 . 255 . 0 . 0
● Gateway 255 . 255 . 0 . 0
● DNS Server 255 . 255 . 0 . 0
OK
Exit
Previous
Previous
Appeared when
wired and wireless
are simultaneously
connected.
TV