LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS PLASMA TV MODELS 32LC7D 32LC7DC 37LC7D 42LC7D 42PC5D 42PC5DC 50PC5D 50PC5DC Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 10 Never touch this apparatus or antenna during a thunder or lighting storm. 11 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 12 Refer all servicing to qualified service personnel.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PICTURE CONTROL SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 42 Preset Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - EZ Picture - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 - Color Tone - Preset. . . . . . . . . . . . . . . . . . . .
TIME SETTING Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION FEATURE OF THIS TV What is a Plasma TV? Using plasma is the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The Plasma TV can be thought of as a descendant of the neon lamp and or a series of fluorescent lamps. How does it work? Plasma TV is an array of cells, known as pixels, which are comprised of three sub-pixels, corresponding to the colors red, green, and blue.
PREPARATION ACCESSORIES NU BR IG HT R + EN TE RA TIO TV SIMP LINK INP UT PO W TV CH AU DIO ER IN PU T DV MOD D CA BL E E VC R ST B BRI GHT PREPARATION Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Front Panel Controls Plasma TV Model Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed.
PREPARATION LCD TV Model CH CHANNEL (D,E)Buttons VOL VOLUME (F,G)Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed.
PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV.
COMPONENT IN Connect a component video/audio device to these jacks. 2 AV OUT Connect a second TV or monitor. 3 AV (Audio/Video) IN 1 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. 4 ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 5 DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION Plasma TV Model 1 Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. CABLE MANAGEMENT 12 2 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 3 Install the CABLE MANAGEMENT as shown.
1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT as shown. PREPARATION LCD TV Model CABLE MANAGEMENT 3 Bundle the cables using the supplied TWISTER HOLDER. (This feature is not available for all models.) ! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
PREPARATION ATTACHING THE TV TO A WALL ■ ■ This feature is not available for all models. Here shown may be somewhat different from your TV. PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
STAND INSTALLATION (Only 32/37 inches LCD TV models) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Securely install the 4 bolts provided.
PREPARATION VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. PREPARATION Plasma TV Model LCD TV Model 600 mm (32 inches only: 200 mm) R 600 mm 400 mm R 400 mm (32 inches only: 100 mm) ! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) R R Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. ■ HD RECEIVER SETUP When connecting Component cable 1. How to connect VIDEO 1 OPTICAL (MONO) DIGITAL AUDIO OUT S-VIDEO AUDIO 1 2. How to use 18 VIDEO ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
When connecting HDMI cable 1. How to connect Connect the digital set-top box to H D M I / D V I I N 1 or H D M I I N 2 jack on the set. SERVICE 2 No separated audio connection is necessary. HDMI supports both audio and video. RGB IN (PC) REMOTE AUDIO IN (RGB/DVI) CONTROL IN HDMI IN ANTENNA/ CABLE IN 2. How to use ■ ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable AUDIO ANTENNA/ CABLE IN AV OUT REMOTE AUDIO IN (RGB/DVI) CONTROL IN HDMI IN 2 OPTICAL 1 HDMI/DVI IN 1 DVI-DTV OUTPUT RS-232C IN (CONTROL & SERVICE) DIGITAL AUDIO OUT (MONO) S-VIDEO VIDEO AUDIO AV IN 1 EXTERNAL EQUIPMENT SETUP RGB IN (PC) COMPONENT IN VIDEO SERVICE 2 L R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the set.
DVD SETUP When connecting Component cable 1. How to connect AUDIO Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. 2. How to use (MONO ) S-VIDEO VIDEO 1 ■ Turn on the DVD player, insert a DVD. ■ Select C o m p o n e n t 1 input source by using the I N P U T button on the remote control. ■ If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source. ■ Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable AUDIO 1. How to connect 1 S-VIDEO L Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. 1 2 2. How to use Turn on the DVD player, insert a DVD. ■ ■ Select A V 1 input source by using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source. ■ Refer to the DVD player's manual for operating instructions.
VCR SETUP ( VIDEO ) AUDIO To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
( VIDEO ) AUDIO EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable 1. How to connect S-VIDEO ANT OUT OUTPUT SWITCH V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO L R VIDEO AUDIO 1 ■ ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A V 1 input source by using the I N P U T button on the remote control.
OTHER A/V SOURCE SETUP Camcorder 1. How to connect V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO L 2. How to use Select A V 2 input source by using the I N P U T button on the remote control. ■ If connected to A V I N 1 input, select A V 1 input source. ■ Operate the corresponding external equipment.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable EXTERNAL EQUIPMENT SETUP 1. How to connect 1 Connect the RGB output of the PC to the R G B I N ( P C) jack on the set.
! NOTES To get the the best picture quality, adjust the PC graphics card to 1360x768 (42PC5D/5DC models: 1024x768). G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G If the video doesn’t fit the screen, try pressing the ADJUST button to adjust the screen position of TV. G G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode PICTURE SOUND CC SAP ADJUST Overview EXTERNAL EQUIPMENT SETUP When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode. When HDMI/DVI connect to PC output and select HDMI/DVI input, this function is used. After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. When you change the resolution, select the proper resolution in present input to see the best picture appearance.
AV OUT SETUP The TV has a special signal output capability which allows you to hook up the second TV or monitor. NT IN 1. How to connect ICAL L AUDIO UT (MONO) S-VIDEO VIDEO AUDIO 1 ! NOTE G Component1-2, RGB-PC, HDMI1/DVI, HDMI2, DTV input sources cannot be used for AV out. VIDEO L R S-VIDEO EXTERNAL EQUIPMENT SETUP 2 See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT TV INPUT MODE Select the remote’s operating mode. TV, DVD, VCR, AUDIO, CABLE, or STB. POWER DVD MODE CABLE TV VCR/DVD Control video cassette recorders or DVD players. control buttons STB WATCHING TV / CHANNEL CONTROL MENU Displays the main menu. BRIGHT -/ + Adjust the brightness on screen.
POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. Inside the Sliding Cover PICTURE Selects the factory preset picture depend on the viewing environment. G p.44 1 2 3 4 5 6 7 8 9 0 BACK PICTURE SOUND SAP SOUND Selects the factory preset sound for type of program. G p.54 SAP Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) G p.
WATCHING TV / CHANNEL CONTROL TURNING ON TV INPUT TV INPUT POWER First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (D or E) button on the TV or press the POWER, INPUT, TV INPUT, C H (D or 9 ) button on the remote control. E), Number (0~9 1 WATCHING TV / CHANNEL CONTROL Select the viewing source by using the TV INPUT, INPUT button on the remote control.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select the each menu. 2 Press the G button and then use D E F G button to display the available menus.
WATCHING TV / CHANNEL CONTROL CHANNEL SEARCH INPUT TV INPUT POWER Auto Scan (EZ Scan) DVD MODE CABLE TV AUDIO WATCHING TV / CHANNEL CONTROL Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run EZ Scan again after any Antenna/Cable connection changes. A password is required to gain access to EZ Scan menu if the Lock System is turned on.
INPUT TV INPUT POWER Add/Delete Channel (Manual Scan) DVD MODE CABLE TV AUDIO VCR S TB A password is required to gain access to Manual Scan menu if the Lock System is turned on. BRIG MENU HT - BRIG HT + ENTER TIMER SIMPLI RATIO NK EZ Scan 1 Press the M E N U button and then use D or E button to select the SETUP menu. Manual Scan Channel Edit DTV Signal Input Source Input Label 2 Press the G button and then use D or E button to select Manual Scan.
WATCHING TV / CHANNEL CONTROL STB AUDIO Channel Editing BRIG HT - MENU BRIG HT + ENTER WATCHING TV / CHANNEL CONTROL There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after EZ Scan on the SETUP menu. A Custom List can be created by toggling each channel on or off with ENTER button.
DTV SIGNAL STRENGTH INPUT TV INPUT POWER This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. DTV Signal: This function is only available when the input signal is DTV or CADTV.
WATCHING TV / CHANNEL CONTROL INPUT SOURCE SELECTION INPUT TV INPUT POWER Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR S TB BRIG HT + ENTER WATCHING TV / CHANNEL CONTROL EXIT TIMER SIMPLI RATIO NK EZ Scan 1 Press the M E N U button and then use to select the S E T U P menu.
INPUT LABEL INPUT TV INPUT POWER Sets a label to each input source which is not in use when you press the INPUT button. DVD MODE CABLE TV AUDIO BRIG HT - VCR S TB MENU BRIG HT + ENTER TIMER SIMPLI RATIO NK EZ Scan 1 Press the M E N U button and then use D or E button to select the S E T U P menu. Manual Scan Channel Edit DTV Signal Input Source Input Label 2 Press the G button and then use D or E button to select I n p u t L a b e l.
WATCHING TV / CHANNEL CONTROL DVD MODE CABLE TV AUDIO This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want S i m p L i n k menu, select O f f. BRIG EXIT WATCHING TV / CHANNEL CONTROL VOL Connect the HDMI/DVI IN 1 or HDMI IN 2 terminal of the TV to the rear terminal (HDMI output) of the Simplink device with the HDMI cable.
SimpLink Functions D i r e c t P l a y : After connecting AV devices to TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of AV devices connected to TV and play it. , , , , , , ■ D i s c p l a y b a c k : Control connected AV devices by pressing the ,D E E N T E R , buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL BRIG This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
Zoom 1 16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. 16:9 Horizon The screen size is, more enlarged at both sides, to create a spectacular view. Horizon Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped.
PICTURE CONTROL PRESET PICTURE SETTINGS VOL EZ Picture - Preset EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. D a y l i g h t, N o r m a l, N i g h t T i m e Settings are preset for the optimum picture quality at the factory and are not adjustable. In the U s e r 1 and U s e r 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
INPUT TV INPUT POWER Color Tone - Preset DVD MODE CABLE TV AUDIO Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. BRIG MENU HT - VCR S TB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK PICTURE CONTROL EZ Picture 1 Press the M E N U button and then use to select the V I D E O menu.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT INPUT TV INPUT POWER EZ Picture - User Mode DVD MODE CABLE TV AUDIO VCR STB Adjust the picture appearance to suit your preference and viewing situations. BRIG HT - MENU BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK PICTURE CONTROL EZ Picture 1 Press the M E N U button and then use to select the V I D E O menu. D or E button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select E Z P i c t u r e.
INPUT TV INPUT POWER Color Tone - User Mode DVD MODE CABLE TV AUDIO VCR S TB You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu. BRIG MENU HT - BRIG HT + ENTER EXIT D or E SIMPLI RATIO NK PICTURE CONTROL 1 Press the M E N U button and then use to select the V I D E O menu.
PICTURE CONTROL XD - PICTURE IMPROVEMENT TECHNOLOGY INPUT TV INPUT POWER XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically changed to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise.
ADVANCED - CINEMA 3:2 PULL DOWN MODE INPUT TV INPUT POWER Set up the TV for the best picture appearance for viewing movies. AUDIO When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog, AV1, AV2, and Component 480i mode.
PICTURE CONTROL ADVANCED - BLACK (DARKNESS) LEVEL INPUT TV INPUT POWER Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1/DVI, or HDMI2mode. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR STB BRIG HT + ENTER EXIT PICTURE CONTROL 1 Press the M E N U button and then use to select the V I D E O menu.
PICTURE RESET INPUT TV INPUT POWER Use to quickly reset all the Video menu options to their original factory preset values. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR S TB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK PICTURE CONTROL EZ Picture 1 Press the M E N U button and then use to select the VIDEO menu. D or E button Color Temperature XD Advanced Video Reset 2 Press the G button and then use select Video Reset.
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD - Plasma TV only A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen. AUDIO BRIG PICTURE CONTROL 1 Press the M E N U button and then use to select the O P T I O N menu. D 2 Press the G button and then use select I S M M e t h o d.
LOW - POWER PICTURE MODE - Plasma TV only INPUT TV INPUT POWER Low power reduces the plasma display power consumption. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR S TB BRIG HT + ENTER EXIT D or E SIMPLI RATIO NK PICTURE CONTROL 1 Press the M E N U button and then use to select the O P T I O N menu. TIMER Aspect Ratio button Caption/Text Caption Option Language ISM Method Low Power 2 Press the G button and then use select L o w P o w e r.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (EZ SOUND) EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Normal, Stadium, News, Music and Theater are preset for good sound quality at the factory and are not adjustable. When you select the Stadium or Theater, the AUDIO menuBalance option is disabled and the Balance option is set to 0 automatically.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Audio Language 1 Press the M E N U button and then use to select the A U D I O menu. D or E button EZ Sound Balance TV Speaker 2 Press the G button and then use select E Z S o u n d.
SOUND &LANGUAGE CONTROL BALANCE INPUT TV INPUT POWER Adjust the left/right sound of speaker to suit your taste and room situations. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR STB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK Audio Language 1 Press the M E N U button and then use D or E button to select the A U D I O menu. EZ Sound Balance SOUND & LANGUAGE CONTROL TV Speaker 2 Press the G button and then use D or E button to select B a l a n c e.
TV SPEAKERS ON/OFF SETUP INPUT TV INPUT POWER Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR S TB BRIG HT + ENTER EXIT 1 TIMER SIMPLI RATIO NK Audio Language Press the M E N U button and then use D or E button to select the A U D I O menu. EZ Sound Balance 2 Press the G button and then use D or E button to select T V S p e a k e r.
SOUND &LANGUAGE CONTROL STEREO/SAP BROADCASTS SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
AUDIO LANGUAGE INPUT TV INPUT POWER Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR S TB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK Audio Language 1 Press the M E N U button and then use D or E button to select the A U D I O menu. EZ Sound Balance 2 Press the G button and then use D or E button to select A u d i o L a n g u a g e.
SOUND &LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION INPUT TV INPUT POWER The menus can be shown on the screen in the selected language. First select your language. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR STB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK Aspect Ratio 1 Press the M E N U button and then use D or E button to select the O P T I O N menu.
CAPTION / TEXT VOL Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
SOUND &LANGUAGE CONTROL INPUT TV INPUT POWER Digital Broadcasting System Captions DVD MODE CABLE TV AUDIO Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. BRIG HT - MENU VCR STB BRIG HT + ENTER EXIT 1 TIMER SIMPLI RATIO NK Aspect Ratio Press the M E N U button and then use D or E button to select the O P T I O N menu.
CAPTION OPTION INPUT TV INPUT POWER Customize the DTV/CADTV captions that appear on your screen. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR S TB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK Aspect Ratio Press the M E N U button and then use D or E button to select the O P T I O N menu. 1 Caption/Text Caption Option Language Low Power SimpLink Press the G button and then use D or E button to select C a p t i o n O p t i o n.
TIME SETTING CLOCK SETTING INPUT TV INPUT POWER Auto Clock Setup DVD MODE CABLE TV AUDIO The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. The factory default value of the Auto Clock is Off, because a clock information sent each broadcasting station is different.
INPUT TV INPUT POWER Manual Clock Setup DVD MODE CABLE TV AUDIO VCR S TB If the current time setting is wrong, reset the clock manually. BRIG HT - MENU BRIG HT + ENTER EXIT 1 Press the M E N U button and then use to select the T I M E menu. D or E TIMER SIMPLI RATIO NK Auto Clock button Manual Clock Off Timer On Timer Sleep Timer Press the G button and then use select M a n u a l C l o c k.
TIME SETTING AUTO ON/OFF TIMER SETTING INPUT TV INPUT POWER The timer function operates only if the current time has been set. The Off-Timer function overrides the On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. AUDIO BRIG Press the M E N U button and then use to select the T I M E menu.
SLEEP TIMER SETTING BRIG HT - MENU BRIG HT + ENTER The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. EXIT VOL 1 RATIO MUTE SIMPLI NK CH FAV 1 2 3 4 5 6 7 8 9 0 BACK Press the T I M E R button repeatedly to select the number of minutes. First the O f f option appears on the screen, followed by the following sleep timer options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
TIME SETTING AUTO SHUT-OFF SETTING INPUT TV INPUT POWER If set to on and there is no input signal, the TV turns off automatically after 10 minutes. DVD MODE CABLE TV AUDIO BRIG HT - MENU VCR STB BRIG HT + ENTER EXIT TIMER SIMPLI RATIO NK Auto Clock 1 Press the M E N U button and then use D or E button to select the T I M E menu. Manual Clock Off Timer On Timer Sleep Timer Auto Off TIME SETTING 2 Press the G button and then use D or E button to select A u t o O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
PARENTAL CONTROL /RATINGS Set Password Change the password by inputting a new password twice. For USA After inputting the password, use the D or E button to choose S e t p a s s w o r d. 1 Press the G button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized. 2 Press E X I T to return to TV viewing or press M E N U to return to the previous menu.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. i.e) USA Lock System Set Password Block Channel 1 After inputting the password, use the to choose B l o c k C h a n n e l. D or E button G Selection ( G or ) leads you to the block channel screen. Movie Rating TV Rating-Children TV Rating-General Downloadable Rating 2 Press the G button. You will now see a screen filled with channel numbers and a preview picture.
PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) - for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. Lock System Set Password Block Channel After inputting the password, use the choose M o v i e R a t i n g.
TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. Lock System Set Password Block Channel Movie Rating 1 TV Rating-Children After inputting the password, use the D or E button to choose T V R a t i n g - C h i l d r e n.
PARENTAL CONTROL /RATINGS TV Rating English - for CANADA only Selecting canadian english language rating system. 1 After inputting the password, use the choose T V R a t i n g - E n g l i s h. 2 Press the G button and then use the D or E button to select E , C , C 8 +, G , P G, 1 4 +, 1 8 +, or B l o c k i n g O f f.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS 42PC5D (42PC5D-UC) 42PC5DC (42PC5DC-UC) MODELS Including stand Dimensions (Width x Height x Depth) Weight 50PC5D (50PC5D-UC) 50PC5DC (50PC5DC-UC) 41.3 x 30.2 x 12.2 inches 48.9 x 34.9 x 14.6 inches 1048.0 x 766.0 x 310.0 mm 1242.0 x 887.6 x 370.0 mm 41.3 x 28.1 x 3.3 inches 48.9 x 32.6 x 3.5 inches 1048.0 x 713.0 x 83.5 mm 1242.0 x 827.2 x 88.0 mm including stand 61.7 pounds / 28.0 kg 86.6 pounds / 39.3 kg excluding stand 54.2 pounds / 24.6 kg 76.
32LC7D(32LC7D-UB) 32LC7DC(32LC7DC-UB) MODELS Including stand Weight 42LC7D (42LC7D-UB) 36.5 x 27.3 x 11.0 inches 40.7 x 29.5 x 11.3 inches 806.6 x 606.5 x 249.0mm 927.0 x 692.8 x 280.5 mm 1033.4 x 750.0 x 287.6 mm Dimensions (Width x Height x Depth) 31.8 x 23.9x 9.8 inches 37LC7D (37LC7D-UB) 31.8 x 21.7 x 3.1 inches 36.5 x24.8 x 3.5 inches 40.7 x 27.0x 3.5 inches 806.6 x 552.3 x 79.0 mm 927.0 x 630.0 x 88.0 mm 1033.4 x 686.8 x 88.5 mm including stand 30.2 pounds / 13.7 kg 44.1 pounds / 20.
APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode APPENDIX 80 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button.
Remote Control Code VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045
APPENDIX Cable Box Brand Codes ABC 003 046 AJIN 112 ANTRONIK 014 ARCHER 005 CABLE STAR 026 CENTURION 092 CENTURY 007 CITIZEN 007 COLOUR VOICE 065 COMBANO 080 COMTRONICS 019 DIAMOND 023 EAGLE 020 EASTERN 057 ELECTRICORD 032 GE 072 GEMINI 008 GI 052 GOLDEN CHANNEL 030 HAMLIN 049 HITACHI 052 HOSPITALITY 070 JERROLD 002 009 Brand 004 039 042 052 053 007 014 024 LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC 090 081 030 OAK PANASONIC PARAGON 030 040 062 066 PHILIPS 022 025 054 074 050 055
Audio Brand Codes AIWA Codes Brand Codes RCX REALISTIC SAMSUNG 092 103 124 193 204 011 019 106 031 072 156 206 005 044 118 012 076 162 166 205 QUASAR RCA 157 189 225 247 014 100 175 179 201 214 238 103 111 002 034 097 049 104 107 046 013 048 133 158 007 142 104 026 039 065 115 113 080 Brand Codes Brand Codes MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN 002 023 008 003 013 004 021 005 RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 011 007 005 019 009 010 028 070 096 1
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
Code (Hexa) Function Note TV INPUT Remote control Button 0B INPUT Remote control Button 08 POWER Remote control Button (Power On/Off) 79 RATIO Remote control Button 0E TIMER Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash) Remote control Button 1A BACK Remote control Button 09 MUTE Remote control Button 02 VOL D Remote control Button 03 VOL E Remote control Button 00 CH D Remote control Button 01 CH E Remote control Button 1E FAV Remote
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232 control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations (Not standard) TXD RXD GND DSR DTR CTS RTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS Set ID BRIG HT - Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’. G p.89.
APPENDIX Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) 0~1 11. Sharpness k k 0 ~ 64 b 0~9 12. OSD Select k l 0~1 c (G p.89) 13. Remote Control k d 0~1 Lock Mode k m 0~1 05. Volume Mute k e 0~1 14. Treble k r 0 ~ 64 06. Volume Control k f 0 ~ 64 15. Bass k s 0 ~ 64 07. Contrast k g 0 ~ 64 16. Balance k t 0 ~ 64 01. Power k a 02. Input Select k 03. Aspect Ratio k 04. Screen Mute 08.
0 1 . P o w e r ( C o m m a n d: k a ) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * In this model, TV will send the Acknowledge after power on processing completion. * There might be a time delay between command and acknowledgement. 0 2 .
APPENDIX 1 0 . T i n t ( C o m m a n d: k j ) To adjust the screen tint. You can also adjust tint in the Video menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 ~ Green : 64 (*transmit by Hexadecimal code) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.89. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x] *Refer to ‘Real data mapping’.
Data5: 7 Main/Sub Picture 0 Main 1 6 Two/One Part Channel 0 Two 1 One Using Physical Channel 4 3 2 1 0 Step 0 Use x 0 0 0 0 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved 5 The table above lists the binary code which must be converted to Hexadecimal before sending.