User guide

INSTALLATION

UNFOLDING THE BASE STAND

■

This feature is not available for all models (42PC1D

)

Figures shown here may be slightly different from your set.

WWhheenn cclloossiinngg tthhee ssttaanndd ffoorr ssttoorraaggee

First remove the screws in the holes (B) on the bottom

of the stand. And then pull two Hooks (D) of the stand bottom

and fold the stand into the back of the set.

After folding, push two Locks (A) of the stand bottom outward.

NOTE

■

Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1.

Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.

■

Pull the stand out as shown above in Figures 2 ~ 3.

After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.

■

When connecting cables to the set, Do not disengage the lock (C).

This may cause the set to fall, causing serious bodily injury and serious damage to the set.

3 4