User manual

85
ENGENGLISH
MAKING CONNECTIONS
Euro Scart connection
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the Euro Scart cable as
shown on the following illustration. To display im-
ages by using progressive scan, make sure to use
the Euro Scart cable.

Any Euro scart cable used must be signal
shielded.

When watching digital TV in 3D imaging
mode, TV/Monitor out signals cannot be
output through the SCART cable. (Only 3D
models)

If you set the 3D mode to On while a
scheduled recording is performed on
digital TV, monitor out signals cannot be
output through the SCART cable, and the
recording cannot be performed. (Only 3D
models)
NOTE
Output
Type
Current
input model
AV1
(TV Out
1
)
Digital TV Digital TV
Analogue TV, AV Analogue TV
Component / RGB Analogue TV
HDMI Analogue TV
1 TV Out : Outputs Analogue TV or Digital TV signals.
(Only LCD / LED LCD TV)
Output
Type
Current
input model
AV1
(TV Out
1
)
AV2
(Monitor Out
2
)
Digital TV X O
Analogue TV, AV Analogue TV O
Component / RGB Analogue TV X
HDMI Analogue TV X
1 TV Out : Outputs analogue TV signals.
2 Monitor Out: Outputs the current screen image.
(Only PLASMA TV)

Any Euro scart cable used must be signal
shielded.

When watching digital TV in 3D imaging
mode, TV out signals cannot be output
through the SCART cable. (Only 3D
models)
NOTE