Owners manual

138
PICTURE CONTROL
PICTURE CONTROL
ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting
the Picture Mode.
When adjusting Energy Saving in MHEG/MHP mode, the Energy Saving setting is applied after
MHEG/MHP is finished.
Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.
• If you adjust “Energy Saving-Auto, Maximum”, Backlight feature will not work. (LCD TV/LED LCD
TV only)
• If you adjust “Energy Saving-Intelligent Sensor”, Sharpness, Colour, Colour Temperature feature
will not work. (Plasma TV only)
• You can also adjust this feature by selecting Energy Saving button on the remote control.
• When selecting Auto, Backlight is automatically adjusted through intelligent sensor according to the
surrounding condition when intelligent sensor is in the TV. (LCD TV/LED LCD TV only)
1
Select PICTURE.
2
Select Energy Saving.
3
Select Auto, Off, Minimum ,
Medium, Maximum or Screen
Off.
1
Select PICTURE.
2
Select Energy Saving.
3
Select Intelligent Sensor, Off,
Minimum , Medium,
Maximum or Screen Off.
OK
Move
● Aspect Ratio : 16:9
● Picture Wizard
● ꕊ Energy Saving : Off
● Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
• Sharpness 70
PICTURE
● Energy Saving : Off
Auto
Off
Minimum
Medium
Maximum
Screen Off
Off
►
►
OK
Move
● Aspect Ratio : 16:9
● Picture Wizard
● ꕊ Energy Saving : Off
● Picture Mode : Vivid
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour 70
PICTURE
● Energy Saving : Intelligent Sensor
Auto
Off
Minimum
Medium
Maximum
Screen Off
Intelligent Sensor
►
LCD TV/LED LCD TV only
Plasma TV only