Owners manual

A-6
PREPARATION
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■ Image shown may differ from your TV.
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the Protective
Bracket/Bolt or the Plug in type Holder. It
will help prevent the power cable from being
removed by accident.
AC IN
AC IN
AC IN
AC IN
AC IN
Protective Bracket/Bolt
( This feature is not available
for all models.)
Plug in type Holder
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
or
AC IN
AC IN
AC IN
AC IN
AC IN
Install the Cable Management Clip as shown.
If your TV has the Cable Holder, install it as
shown and bundle the cables.
Cable Management Clip
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Holder
2
Put the cables inside the Cable
Management Clip and snap it closed.
3
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
►Do not hold the Cable Management Clip when moving the TV.
- If the TV is dropped, you may be injured or the product may be broken.
►With some TVs, the Plug in type Holder and the Cable Holder are included. If these holders
are inserted into the hole provided on back of the TV, they cannot be removed.
NOTE
32/37/42LD6
***
1
Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the Protective
Bracket/Bolt. It will help prevent the power
cable from being removed by accident.
AC IN
AC IN
AC IN
AC IN
AC IN
Protective Bracket/Bolt
( This feature is not available
for all models.)
AC IN
AC IN
AC IN
AC IN
AC IN
Put the cables inside the Cable
Management Clip and snap it closed.
2
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
47LD6
***