ENGLISH OWNER’S MANUAL LCD TV / LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Separate purchase Wall Mounting Bracket LSW100B or LSW100BG (19/22/26/32LD3***, 32LD4***, 32LD5***, 19/22/26/32LE3***, 32LE4***, 22/26LE5***, 32LE5***) LSW200B or LSW200BG (37/42/47LD4***, 42/46LD5***, 37/42LE4***, 37/42/47LE5***) LSW400B or LSW400BG or DSW400B or DSW400BG Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG LED LCD TV or LCD TV.
CONTENTS PREPARATION EXTERNAL EQUIPMENT SETUP Antenna Connection............................................1 Connecting with a Component cable ..................2 Connecting with an HDMI cable .........................3 Connecting with an HDMI to DVI cable ..............4 Connecting with a Euro Scart cable ...................5 USB setup ...........................................................6 Connecting with a RF Cable ...............................6 Connecting with a RCA cable ......................
CONTENTS PICTURE CONTROL CONTENTS Picture Size (Aspect Ratio) Control ..................92 Picture Wizard ...................................................94 Energy Saving ...................................................95 Preset Picture Settings .....................................96 Manual Picture Adjustment ...............................97 Picture Improvement Technology......................98 Expert Picture Control .......................................99 Picture Reset ........................
PREPARATION LCD TV MODELS : 19/22/26/32LD35**, 19/22/26/32LD34** ACCESSORIES This item is not included for all models. Owner’s Manual Ferrite Core (This item is not included for all models.) * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Remote Control Batteries (AAA) Power Cord PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
PREPARATION FRONT PANEL CONTROLS NOTE PREPARATION ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ►The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. CAUTION ►Do not step on the glass stand or subject it to any impact.
BACK PANEL INFORMATION Only 19/22LD35**, 19/22LD34** ■ Image shown may differ from your TV. 1 12 2 8 1 2 3 4 4 3 5 6 7 9 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment.
PREPARATION Only 26LD35**, 26LD34** ■ Image shown may differ from your TV. 10 PREPARATION 11 1 2 4 3 5 6 2 12 13 7 1 2 3 A-4 8 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment.
Only 32LD35**, 32LD34** ■ Image shown may differ from your TV. 10 2 3 4 5 6 2 PREPARATION 11 1 12 13 7 1 2 3 8 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment.
PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. PREPARATION Only 19/22LD35**, 19/22LD34** 1 2 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
NOT USING THE DESK-TYPE STAND ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Only 19/22LD35**, 19/22LD34** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. 4 Insert the Protection Cover into the TV. After removing the protection paper from the protection cover, adhere it to the TV as shown.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. PREPARATION Only 19/22LD35**, 19/22LD34** Only 26/32LD35**, 26/32LD34** After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. 1 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 2 Open the Cable Management Clip as shown. Cable Holder Cable Management Clip 3 Fit the Cable Management Clip as shown.
SWIVEL STAND (Except for 19/22LD35**, 19/22LD34**) ■ Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ATTACHING THE TV TO A DESK (Only 26/32LD35**, 26/32LD34**) ■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
PREPARATION KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. PREPARATION The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.
■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally. EARTHING Power Supply Circuit breaker DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. ►Should Install wall mount on a solid wall perpendicular to the floor. ►Should use a special wall mount, if you want to install it to ceiling or slanted wall.
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. (POWER) Switches the TV on from standby or off to standby. ENERGY Adjust the Energy Saving mode of the TV.(► p.95) SAVING PREPARATION AV MODE It helps you select and set images and sounds when connecting AV devices.(► p.50) INPUT External input mode rotate in regular sequence.(► p.43) TV/RAD Selects Radio, TV and DTV channel. 0 to 9 number Selects a programme.
VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. RATIO Selects your desired Aspect Ratio of picture. (► p.92) PREPARATION MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one. SIMPLINK / Controls SIMPLINK or MY MEDIA menu(Photo List MY MEDIA Menu and Music List).
PREPARATION LCD TV MODELS : 32/37/42/47LD4***, 26/32LD32**, 26/32LD33** ACCESSORIES PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. Batteries (AAA) Owner’s Manual Ferrite Core (This item is not included for all models.) x 8 or Remote Control Power Cord * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
FRONT PANEL CONTROLS NOTE CAUTION ►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. ►Do not drag the TV. The floor or the product may be damaged. PREPARATION ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
PREPARATION Only 32/37/42/47LD42**, 26/32LD32**, 26/32LD33** PREPARATION Only 26LD32**, 26LD33** POWER VOLUME MENU INPUT OK PROGRAMME Only 32/37/42/47LD42**, 32LD32**, 32LD33** PROGRAMME SPEAKER Remote Control Sensor VOLUME OK MENU INPUT POWER Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
BACK PANEL INFORMATION ■ Image shown may differ from your TV. 10 11 1 2 3 4 5 PREPARATION 1 6 2 12 13 7 1 2 3 8 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment.
PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. PREPARATION Only 32/37/42/47LD45** 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
BACK COVER FOR WIRE ARRANGEMENT ATTACHING THE TV TO A DESK ■ Image shown may differ from your TV. (Only 32/37/42LD4***, 26/32LD32**, 26/32LD33**) Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Open the Cable Management Clip as shown. ■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
PREPARATION KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. PREPARATION The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.
■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally. EARTHING Power Supply Circuit breaker DESKTOP PEDESTAL INSTALLATION ► Should Install wall mount on a solid wall perpendicular to the floor. ► Should use a special wall mount, if you want to install it to ceiling or slanted wall. ► The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g.
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. (POWER) Switches the TV on from standby or off to standby. PREPARATION ENERGY Adjust the Energy Saving mode of the TV.(► p.95) SAVING AV MODE It helps you select and set images and sounds when connecting AV devices.(► p.50) INPUT External input mode rotate in regular sequence.(► p.43) TV/RAD Selects Radio, TV and DTV channel. 0 to 9 number Selects a programme.
VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. RATIO Selects your desired Aspect Ratio of picture. (► p.92) PREPARATION MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one. SIMPLINK / Controls SIMPLINK or MY MEDIA menu(Photo List MY MEDIA Menu and Music List).
PREPARATION LCD TV MODELS : 32/42/46/52/60LD5*** ACCESSORIES PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. This item is not included for all models. Batteries (AAA) Owner’s Manual Remote Control Polishing Cloth Polishing cloth for use on the screen. Ferrite Core (This item is not included for all models.
FRONT PANEL CONTROLS NOTE CAUTION ► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. ► Do not drag the TV. The floor or the product may be damaged. PREPARATION ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV. PREPARATION 11 1 2 12 3 4 5 6 7 2 13 14 8 1 2 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. 3 RGB IN Input Connect the output from a PC.
STAND INSTALLATION 1 2 ■ Image shown may differ from your TV. 1 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 2 Open the Cable Management Clip as shown. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. PREPARATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened.
PREPARATION ATTACHING THE TV TO A DESK (Only 32/42LD5***) PREPARATION ■ Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. NOT USING THE DESK-TYPE STAND ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Insert the Protection Cover into the TV until clicking sound.
KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. NOTE ►The Kensington Security System is an optional accessory. ►If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. ►Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.
PREPARATION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally. EARTHING PREPARATION Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. (POWER) Switches the TV on from standby or off to standby. ENERGY Adjust the Energy Saving mode of the TV.(► p.95) SAVING INPUT External input mode rotate in regular sequence.(► p.43) TV/RAD Selects Radio, TV and DTV channel. PREPARATION AV MODE It helps you select and set images and sounds when connecting AV devices.(► p.50) 0 to 9 number Selects a programme.
PREPARATION VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. PREPARATION MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.92) MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one.
LED LCD TV MODELS : 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5*** ACCESSORIES Polishing Cloth Do not use excessive Polishing cloth for force. This may cause use on the screen. scratching or discolouration. or Owner’s Manual Batteries (AAA) PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. This item is not included for all models. ■ Image shown may differ from your TV.
PREPARATION FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. ► The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. PREPARATION CAUTION ► Do not step on the glass stand or subject it to any impact.
BACK PANEL INFORMATION Only 19/22LE3***, 22LE5*** ■ Image shown may differ from your TV. 12 13 1 7 3 2 8 4 5 6 9 1 DC ADAPTER PORT Connect to the power cord socket. 2 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. 10 3 RGB/DVI Audio Input Connect the audio from a PC or DTV. 4 Audio/Video Input Connect audio/video output from an external device to these jacks.
PREPARATION Only 26LE3***, 26LE5*** USB IN ■ Image shown may differ from your TV. 11 PREPARATION H/P HDMI IN 3 12 1 3 2 4 5 6 7 13 (RGB) DC IN 7 9 1 DC ADAPTER PORT Connect to the power cord socket. 2 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. 10 3 RGB/DVI Audio Input Connect the audio from a PC or DTV.
Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5*** ■ Image shown may differ from your TV. CAUTION 12 13 2 14 6 2 3 7 1 2 3 8 4 10 5 9 10 ► Use a product with the following thickness for optimal connection to HDMI cable (Only HDMI IN 4) / USB device. *A 10 mm PREPARATION 1 11 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (► p.137 to 147) Never attempt to operate the TV on DC power.
PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Only 19/22LE3***, 22LE5*** PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Only 19/22/26LE3***, 22/26LE5*** 1 Secure the power cord with the Cable Holder on the TV back cover. It will help prevent the power cable from being removed by accident. PREPARATION After connecting the cables as necessary, install Cable Holder as shown and bundle the cables.
PREPARATION ATTACHING THE TV TO A CONNECTION OF TV DESK (Only 32LE3***, 32LE4***, 32LE5***) (Only 19/22/26LE3***, 22/26LE5***) PREPARATION ■ Ima4e shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. 1-Screw (provided as parts of the product) Stand ■ Image shown may differ from your TV.
KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models. ■ Image shown may differ from your TV. NOTE ► The Kensington Security System is an optional accessory. ► If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. ► Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.
PREPARATION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally. 10 cm 10 cm 10 cm 10 cm EARTHING PREPARATION Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. ■ Image shown may differ from your TV. (POWER) Switches the TV on from standby or off to standby. AV MODE It helps you select and set images and sounds when connecting AV devices.(► p.50) INPUT External input mode rotate in regular sequence.(► p.43) TV/RAD Selects Radio, TV and DTV channel. PREPARATION ENERGY Adjust the Energy Saving mode of the TV.(► p.95) SAVING 0 to 9 number Selects a programme.
PREPARATION VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. PREPARATION MARK Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu. RATIO Selects your desired Aspect Ratio of picture. (► p.92) MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE UP/ Move from one full set of screen information to the DOWN next one.
EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47LD4*** models. ■ Image shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE This TV can receive Digital RF/Cable signals without an external digital set-top box.
CONNECTING WITH AN HDMI CABLE Connect the HDMI output of the external equipment (digital settop box, DVD, etc.) to HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3***), HDMI IN 3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) or HDMI IN 4 (Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) jack on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE EXTERNAL EQUIPMENT SETUP 4 1 Connect the digital set-top box or the DVI output of the PC to HDMI/DVI IN 1 jack on the TV. 2 Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 3 Turn on the digital set-top box or the PC and the TV. (Refer to the digital set-top box or the PC manual for operating instructions.
CONNECTING WITH A EURO SCART CABLE Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV1 Euro scart socket on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) 3 Select AV1 input source using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP USB SETUP 1 Connect the USB device to the USB IN jack on the TV. or 1 EXTERNAL EQUIPMENT SETUP 2 After connecting the USB IN jack, you use the USB function. (► p.52) CONNECTING WITH A RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. 1 Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV. 2 Connect the antenna cable to the ANT IN socket of the VCR.
CONNECTING WITH A RCA CABLE 1 1 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Or, Operate the corresponding external equipment. (Refer to external equipment operating guide.) 3 or Select AV2 input source using the INPUT button on the remote control. If connected to AV IN 3, select AV3 input source. NOTE ► If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. EXTERNAL EQUIPMENT SETUP 8 1 Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. 2 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 3 Turn on the PC and the TV 4 Select RGB input source using the INPUT button on the remote control.
USB IN INSERTION OF CI MODULE Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.34. AV IN 2 NOTE ► Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. Check this point as shown and insert the CI Module.
EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). EXTERNAL EQUIPMENT SETUP 10 1 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
EXTERNAL EQUIPMENT WIRELESS CONNECTION (Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) You can connect between TV and external equipment wirelessly. For further information, refer to the “LG Wireless Media Box” manual for operating instructions.
EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLAY RESOLUTION RGB-PC, HDMI/DVI-PC mode EXTERNAL EQUIPMENT SETUP 12 HDMI/DVI-DTV mode Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.78 59.87 1360x768 47.72 59.80 1280x1024 63.981 60.02 28.125 50 66.587 59.93 26.97/27 23.97/24 33.716/33.75 29.976/30.00 56.25 50 67.43/67.5 59.
SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. Move • Sh Sharpn arpn p ess 70 • Colour 60 SCREEN OK Move Resolution • Tint 0 R G • Colour Temp. 0 W C Auto Config. Position To Set • Advanced Control Size • Picture Reset ► • TruMotion Screen •• Screen Prev. Yes No Phase Reset 1 2 3 4 5 EXTERNAL EQUIPMENT SETUP PICTURE Select PICTURE. Select Screen. Select Reset.
EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. PICTURE Move • Sh Sharpn arpn p ess 70 • Colour 60 SCREEN OK Prev. Move Resolution • Tint 0 R G • Colour Temp. 0 W C Auto Config.
Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] Move • Sh Sharpn a p ess arpn 70 • Colour 60 SCREEN OK Resolution • Tint 0 R G • Colour Temp. 0 W C Auto Config. Move Prev. 1024 x 768 1280 x 768 1360 x 768 Position • Advanced Control Size • Picture Reset Screen •• Screen ► • TruMotion Phase Reset 1 2 3 4 EXTERNAL EQUIPMENT SETUP PICTURE Select PICTURE. Select Screen.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually. This function works in the following mode : RGB[PC]. EXTERNAL EQUIPMENT SETUP SCREEN PICTURE Move • Sh S arpn a p ess 70 0 • Colour 60 Move Prev. OK Resolution Auto Config. • Tint 0 R G • Colour Temp.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the / I, INPUT or P (or P ▲▼ ) button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. WATCHING TV / PROGRAMME CONTROL Aspect Ratio: Selects your desired picture format. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1,000. But the number may differ slightly depending on broadcasting signals. DVB-T, DVB-C Auto Tuning is a menu for users in countries that support DVB cable.
If you want to select the Cable, Move ● CI ● Manual Tuning ● Programme Tuning ● Programme Edit ● CI Information ● Cable Move ● Auto Tuning ● Auto Tuning Antenna Cable Edit Information ● Cable DTV Setting SETUP OK Please select your TV Connection.
WATCHING TV / PROGRAMME CONTROL ■ When you select the Quick, Home Tuning Quick Start Frequency(kHz) : 114000 ● Frequency(kHz) End Frequency(kHz) : 862000 ● Symbol Network ◄ Quick ► Cable 362000 Start Frequency(kHz) : 114000 6900 End Frequency(kHz) : 862000 rate(kS/s) ● Modulation : Auto On 640QAM Network ID Network : Auto Cable Check your antenna connection. The previous channel information will be updated during Auto Tuning.
■ When you select the Full, Full Cable Search every available signal. Cable Check your antenna connection. The previous channel information will be updated during Auto Tuning. Skip Scramble Programme Automatic Numbering 7 8 9 Start Close Select Full. Select OK. Select Start. Run Auto tuning. • If you wish to keep on auto tuning, select Start using the button. Then, press the OK button. Otherwise select Close.
WATCHING TV / PROGRAMME CONTROL WATCHING TV / PROGRAMME CONTROL 24 The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels.
CABLE DTV SETTING (IN CABLE MODE ONLY) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation. After changing Service Operator, a warning window saying that channel map will be deleted when OK button is pressed or Close is selected, and a Auto-tuning pop-up window appears when ‘YES’ is selected.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. If you want to select the Antenna, SETUP ● Auto ► Tuning ● Manual Tuning ● Programme ● CI SETUP OK Move ◄ Tuning ● Manual Tuning ► WATCHING TV / PROGRAMME CONTROL ● Auto Move Edit ● Programme Information ● CI Edit OK ► DTV UHF CH.
If you want to select the Cable, SETUP Move ● Auto ● Programme ► ● Manual Tuning Edit Information ● Cable OK Cable DTV ● Manual Tuning Symbol rate(kS/s) ● Programme Modulation ● CI DTV Setting Move ◄ Frequency(kHz) Tuning Edit 362000 6875 64QAM Information ● Cable ► DTV Setting ● Signal Strength ● Signal Quality 50% 50% Add Close 1 2 3 4 Select SETUP. Select Manual Tuning. Select Cable DTV. Make appropriate adjustments.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP Tuning ● Auto ● Programme Move Edit ● Programme Information ● CI OK Tuning ◄ ● Manual Tuning ► ● Manual Tuning ● CI SETUP OK ► ● Auto Move Edit Information ► TV ◄ ● Storage 3 ● Storage ● System BG ● System ● Band V/UHF ● Channel or 0 ► Cable TV 3 BG ● Band V/UHF ● Channel 0 ● Fine ◄► ● Fine ◄► ● Search ◄► ● Search ◄► ● Name C 02 ● Name C 02 Store Store Close Close You can assign a station name with five characters to each programme number.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P during TV viewing. button If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you start Auto Tuning.
IN DTV/RADIO MODE ■ Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 BLUE Release. • When programmes are to be skipped, the skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL ■ Skipping a programme number 1 Select a programme number to be skipped. 2 BLUE Turn the programme number to blue. 3 BLUE Release. WATCHING TV / PROGRAMME CONTROL ■ Auto Sort 1 • When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
■ Selecting favourite programme group 1 2 3 Select your desired programme. Display a pop-up window where Favourite group can be changed. Select a Favourite group.
WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CI module from the TV. This may cause a malfunction.
SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. Software Update Picture Test SETUP PICTURE AUDIO Sound Test TIME Signal Test Software Update ◄ On ► ● Current Version 00.00.01 Close LOCK INPUT OPTION Press OK( ) to set programme settings. Customer Support 1 2 RED Simple Manual Exit Select Customer Support. Select Software Update. Select On or Off.
WATCHING TV / PROGRAMME CONTROL ■ When setting “Software Update” Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. ? Software update is available. Would you like to download now? Yes No WATCHING TV / PROGRAMME CONTROL 36 Simple Update : for current update stream Download starts when "Yes" is selected. At this time, progressing pop-up window does not display. Download progress status can be checked from Software Update menu.
PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. Software Update Picture Test SETUP PICTURE AUDIO Sound Test TIME ? Do you have a problem in this test screen? Signal Test Yes No Close LOCK OPTION Press OK( 2 3 MY MEDIA ) to set programme settings. Customer Support 1 INPUT RED Simple Manual Exit Select Customer Support. Select Picture Test or Sound Test. Select Yes or No. WATCHING TV / PROGRAMME CONTROL Product/Service Info.
WATCHING TV / PROGRAMME CONTROL DIAGNOSTICS This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned *MUX. This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.
PRODUCT/SERVICE INFORMATION This function is a customer support function that can see product/service information and customer service center information. Software Update Picture Test SETUP PICTURE AUDIO TIME Sound Test Signal Test Close LOCK Press OK( OPTION INPUT ) to set programme settings. Customer Support 1 2 3 RED MY MEDIA Simple Manual Exit Select Customer Support. Select Product/Service Info.. Display MODEL/TYPE, Software version, Serial Number, Customer service center and Homepage.
WATCHING TV / PROGRAMME CONTROL SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. ■ Image shown may differ from your TV. WATCHING TV / PROGRAMME CONTROL SETUP PICTURE AUDIO TIME LOCK OPTION INPUT MY MEDIA Press OK( ) to set programme settings. Customer Support 1 2 Simple Manual Exit • RED : Go to the Index page. • BLUE : Play the Simple Manual automatically or manually.
SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Mini Glossary Programme List 1 BBC ► Displayed when the Locked Programme. Exit 2 BBC 3 BBC 4 BBC 5 BBC A ■ Displaying programme LIST 1 Display the Programme List. • You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode.
WATCHING TV / PROGRAMME CONTROL ■ Paging through a programme list 1 Turn the pages. 2 Return to normal TV viewing. Exit Favourite List ◄ ►Favourite Pr. Group ◄ Group B ► ► 1 BBC 2 BBC ► WATCHING TV / PROGRAMME CONTROL ■ Displaying the favourite programme list 3 BBC Pr.Reg. 1 Pr.Edit BLUE Turn the programme edit. YELLOW Current channel is registered/ cancelled as preferred channel on currently selected Group. Display the Favourite Programme List. Favourite group is changed.
INPUT LIST HDMI and AV1 (SCART) can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV mode. ■ Image shown may differ from your TV. Input List Move USB AV1 RGB HDMI1 HDMI2 AV2 AV3 HDMI3 HDMI4 Input Label 1 Select the input source. Component Exit • Antenna or Cable : Select it when watching the DTV/RADIO/TV.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. ■ Image shown may differ from your TV. Input Label Input List Antenna WATCHING TV / PROGRAMME CONTROL RGB Move USB HDMI1 AV1 HDMI2 AV2 AV3 HDMI3 OK ◄ ► AV2 ◄ ► AV3 ◄ ► Component ◄ ► RGB ◄ ► Component HDMI4 Input Label AV1 Exit ▼ Close 1 2 3 BLUE Select Input Label. Select the source. Select the label. • Press the MENU/EXIT button to return to normal TV viewing.
DATA SERVICE (This menu is enabled only in Ireland. ) This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same time. If only one of them exists, either MHEG or Teletext is enabled regardless of which option you selected.
WATCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu,select “Off”.
Connecting to Home Theater with the SIMPLINK logo. Connect the HDMI/DVI IN 1, HDMI IN 2 (Except for 19/22LD3***), HDMI IN 3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) or HDMI IN 4 (Only 32LE3***, 32/42/47LE4***, 32/37/42/47/55LE5***) terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables. 2 Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables.
WATCHING TV / PROGRAMME CONTROL SIMPLINK Functions WATCHING TV / PROGRAMME CONTROL 48 Disc playback Control connected AV devices by pressing the , OK, ►, ▀, l l, ◄◄ and ►► buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off.
SIMPLINK Menu Press the button and then OK button to select the desired SIMPLINK source. 1 TV viewing : Switch to the previous TV programme regardless of the current mode. 2 DISC playback : Select and play connected discs. When multiple discs are available, the device type of discs are conveniently displayed at the bottom of the screen. OK 3 5 HDD Recordings playback : Play and control recordings stored in HDD.
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game WATCHING TV / PROGRAMME CONTROL 1 AV MODE Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games. Off Cinema Game Sport Press the AV MODE button repeatedly to select the desired source.
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. When the Lock System menu is "On", the message to enter the password appears.
TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated. When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu. In USB device, you can not add a new folder or delete the existing folder.
Precautions when using the USB device TO USE A USB DEVICE ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized. ► A USB storage device which uses its own driver may not be recognized. ► The recognition speed of a USB storage device may depend on each device.
TO USE A USB DEVICE MOVIE LIST (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336) You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV.
File Video Decoder Audio Codec mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM dat MPEG1 Extension name ts,trp,tp MPEG2, H.264, AVS, VC1 Max Resolution MP2 MP2,MP3,Dolby Digital, AAC,HE-AAC vob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM mp4, mov MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 AAC,HE-AAC,MP3 mkv H.264, MPEG-1,2,4 divx, avi MPEG2, MPEG4,DivX 3.11, DivX 4. DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.
TO USE A USB DEVICE Screen Components You can also adjust USB in the INPUT menu. 1 Select MY MEDIA. 2 Select Movie List.
Movie Selection ■ When playing movie files Page 1/1 Movie List Drive1 Page 1/1 001 002 003 005 006 051. Apple_ ...... 02:30:25 Move To Photo List Select the target folder or drive. 2 Play P Page Change Mark Exit Mark Mode • Use the P MARK button to navigation in the movie page. Select the desired movie title. 3 Movie files are played.
TO USE A USB DEVICE ■ When selected movie files are played Page 1/1 Movie List Mark Mode Drive1 Page 1/1 001 002 003 005 006 051. Apple_ ...... 02:30:25 Move Play Marked 1 P Page Change Exit Mark Mode TO USE A USB DEVICE Select the desired movie title. BLUE or 4 5 Unmark All Mark Select the target folder or drive. 2 3 Mark All 004 MARK Mark Exit • When one or more movie files are marked, the marked movies will be played in sequence. Convert to Mark Mode.
Using the remote control RED Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically. GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode. EXIT Return to normal TV viewing. ► If you select “Yes” from OSD when playing the same file after the movie file has been stopped, it will restart where it stopped previously.
TO USE A USB DEVICE Using the Movie List function, play Choose options. Set Video Play. Set Video. Set Audio. ■ TO USE A USB DEVICE 1 2 Close ◄► ► ► II or 01:02:30 / 02:30:25 ◄◄ ►► Q.MENU Option Hide Exit Show the Option menu. Select Set Video Play., Set Video. or Set Audio.. NOTE ► Option values changed in Movie List does not affect Photo List and Music List. ► Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
Using the remote control ■ ► II ◄◄ / ►► Stop the playing movie file. Press the PLAY(►) button to return to normal playback. During playback, press the Pause(II) button. ■ Still screen is displayed. ■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state. ■ Press the Pause(II) button and then use the FF(►►) button for slow motion.
TO USE A USB DEVICE ■ When you select the Set Video Play, Set Video Play. Picture Size ◄ Full ► Audio Language ◄ 1 ► Subtitle Language ◄ On ► ● Language ◄ English ► ● Code page ◄ Default ► ● Sync ◄ 0 ► ● Position ◄ 0 ► ● Size ◄ Normal ► Repeat ◄ On ► Previous 1 TO USE A USB DEVICE 2 Select Picture Size, Audio Language, Subtitle Langugae or Repeat. Make appropriate adjustments.
■ When you select the Set Video, Set Video. Picture Mode ◄ ◄ ● Contrast 100 ◄ ● Brightness 50 ◄ ► ● Colour 60 ◄ ► ● Dynamic Contrast ◄ ● Edge Enhancer ● Noise Reduction TruMotion ► Medium ► ◄ High ► ◄ Medium ► ◄ Low ► (Only 32/42/46/52/60LD5***, 32/37/42/47/55LE5***) Previous Select Picture Mode or TruMotion. Make appropriate adjustments. (Refer to p.
TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► Previous TO USE A USB DEVICE 64 1 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
PHOTO LIST You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode. PHOTO(*.JPEG) supporting file Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440 • You can play JPEG files only. • Non-supported files are displayed in the form of predefined icon.
TO USE A USB DEVICE Photo Selection ■ When playing photo files Page 1/1 Photo List Drive1 001 010 002 011 Page 1/1 003 004 005 006 012 013 014 015 Move To Music List TO USE A USB DEVICE 1 Select the target folder or drive. 2 3 Change Numbers 008 007 View P Page Change Mark Mode • Use the P 009 MARK Mark Exit button to navigation in the photo page. Select the desired photos. Photo files are displayed.
■ When selected photo files are displayed Page 1/1 Photo List Mark Mode 001 002 010 011 Drive1 Page 1/1 003 004 005 006 012 013 014 015 Move View Marked Select the target folder or drive. 2 3 Select the desired photos. BLUE or 4 5 Unmark All Convert to Mark Mode. Mark P Page Change Exit Mark Mode 009 MARK Mark Exit • When one or more photos are marked, you can view each marked photo or a slide show of the marked photos.
TO USE A USB DEVICE Using the remote control RED Display the selected photo file. GREEN Mark all photo files on the screen. YELLOW Deselect all marked photo files. BLUE Exit the Mark Mode. Return to normal TV viewing.
How to view photo Detailed operations are available on full-sized photo view screen. Page 1/1 Photo List Drive1 001 002 010 011 Page 1/1 003 004 005 006 012 013 014 015 Move To Music List 008 007 View P Page Change MARK Mark Exit Mark Mode Change Numbers 009 ◄ ► The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Press the EXIT button to move to the previous menu screen. ◄ Slideshow 1 2 3 ► BGM ■ 2/13 ► Q.
TO USE A USB DEVICE 01_a.jpg 2008/12/10 1920 x 1080 479 KB 4 ◄ • Use Slideshow ► BGM ■ 2/13 ► Q.MENU Option Hide Exit ► Slideshow : When no picture is selected, all photos in the current folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show. ■ Set the time interval of the slide show in Option. TO USE A USB DEVICE ► BGM (Background Music) : Listen to music while viewing photos in full size.
Using the Photo List function 01_a.jpg 2008/12/10 1920 x 1080 479 KB Choose options. ◄ ► Set Photo View. Set Video. Set Audio. Close ◄ Slideshow 1 or BGM ■ 2/13 ► Q.MENU Option Hide Exit Show the Option menu. Select Set Photo View., Set Video. or Set Audio.. NOTE ► Option values changed in Movie List does not affect Photo List and Music List. ► Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
TO USE A USB DEVICE ■ When you select the Set Photo View, Set Photo View. Slide Speed ◄ BGM Fast ► Drive1 ● Repeat ◄ On ► ● Random ◄ Off ► Previous 1 2 TO USE A USB DEVICE 72 Select Slide Speed or BGM. Make appropriate adjustments.
■ When you select the Set Video, Set Video. Picture Mode ◄ ◄ ● Contrast 100 ◄ ● Brightness 50 ◄ ► ● Colour 60 ◄ ► ► ● Dynamic Contrast ◄ Medium ► ● Edge Enhancer ◄ High ► ● Noise Reduction ◄ Medium ► TruMotion ◄ Low ► (Only 32/42/46/52/60LD5***, 32/37/42/47/55LE5***) Previous Select Picture Mode or TruMotion. Make appropriate adjustments. (Refer to p.
TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► Previous TO USE A USB DEVICE 74 1 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
MUSIC LIST You can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. MUSIC (*.MP3) supporting file Bit rate 32 to 320 • Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3 : 16 kHz, 22.
TO USE A USB DEVICE Music Selection Page 1/1 Music List Drive1 001. - B01.mp3 00:00 Page 1/1 002. - B02.mp3 00:00 003. - B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 Move To Movie List Change Numbers ■ When playing music files 1 Page Change Mark Mode MARK Mark Exit • Use the P button to navigate up/down in the music page. TO USE A USB DEVICE Select the desired music title. Music files are played.
■ When selected music files are played Page 1/1 Music List Mark Mode Drive1 001. - B01.mp3 00:00 Page 1/1 002. - B02.mp3 00:00 003. - B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 Move Play Marked Select the target folder or drive. 2 3 Select the desired music title. BLUE or 4 5 Convert to Mark Mode. Mark desired music file.
TO USE A USB DEVICE Using the remote control RED Display the selected music file. GREEN Mark all music files on the screen. YELLOW Deselect all marked music files. BLUE Exit the Mark Mode. Return to normal TV viewing.
Using the Music List function, play Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 Set Audio Play. ► 004. - B04.mp3 00:00 005. - B05.mp3 00:00 ► 005. - B05.mp3 ■ 1 II ◄◄ ►► or Set Audio. 006. - B06.mp3 00:00 ◄► Play with Photo 007. - B07.mp3 00:00 008. - B08.mp3 00:00 Close 02:30 / 03:25 Q.MENU Option Hide Exit Show the Option menu. Select Set Audio Play. or Set Audio. NOTE ► Option values changed in Movie List does not affect Photo List and Music List.
TO USE A USB DEVICE Using the remote control ■ ► II ◄◄ / ►► GREEN ENERGY SAVING TO USE A USB DEVICE 80 or Stop the playing music file. Press the PLAY(►) button to return to normal playback. When you press the Pause(II) button while playing the file, the playback will be paused. When you press the Pause(II) button again while the playback is paused, it will resume the playback. When playing, When you press the REW(◄◄) button, the previous music file will be played.
■ When you select the Set Audio Play, Set Audio Play. Repeat ◄ On ► Random ◄ Off ► Previous 1 2 Select Repeat or Random. Make appropriate adjustments.
TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Sound Mode ◄ Standard ► Auto Volume ◄ Off ► Clear Voice II ◄ Off ► Balance 0 ◄ L R ► Previous TO USE A USB DEVICE 82 1 2 Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. 002. B02.mp3 ► 00:31 / 04:04 NOTE TO USE A USB DEVICE ► A damaged or corrupted music does not play but displays 00:00 in playtime.
TO USE A USB DEVICE DIVX REGISTRATION CODE (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336) Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod.
DEACTIVATION (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/26/32LD355, 19/22/26/32LD356, 19/22/26/32LD345, 19/22/26/32LD346 32/37/42/47LD425, 32/37/42/47LD426, 26/32LD335, 26/32LD336) The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices.
EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Switch on/off EPG 1 Switch on or off EPG. Select a programme 1 or Select desired programme. Button Function in NOW/NEXT Guide Mode You can view a program being broadcasted and one scheduled to follow. Change EPG mode. Programme Guide ▲ 25 Nov. 2008 10:05 That ’70s show DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15 YELLOW BLUE Enter Manual Timer mode. Enter Schedule List mode.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in 8 Day Guide Mode Programme Guide ▲ 25 Nov. 2008 10:05 RED Change EPG mode. DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15 ◄ ALL 14:00 Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa 2 YLE TV2 Enter Date setting mode. 4 TV.. 5 YLE FST 6 CNN YELLOW 8 YLE24 Enter Manual Timer mode. FAV Favourite Mode BLUE ...
Button Function in Date Change Mode Programme Guide or ▲ 25 Nov. 2008 10:05 That ’70s show DTV 1 YLE TV1 25 Nov. 2008 09:45~10:15 ◄ ALL Change to the selected date. 2 YLE TV2 5 YLE FST 6 CNN 8 YLE24 15:00 ▼ 4 TV.. Select a date. Tue. 25 Nov. 14:00 1 YLE TV1 ... ◄ GREEN or Switch off Date setting mode. Kungskonsumente Antigues Roadshow The Drum Mint Extra TV2: Farmen The Drum You Call The Hits Fashion Essentials ... ... ... Tänään otsikoissa ▼ Date Change or Switch off EPG.
EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out. This function is available only when recording equipment that use pin8 recording signalling has been connected to the TV-OUT(AV1) terminal, using a SCART cable. Recording function is only supported in the Digital mode and not in the Analogue mode. Manual Timer Switch off Manual Timer mode.
Button Function in Schedule List Mode If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Currently recording item cannot be edited or deleted. Schedule List Page1/1 Start Date YELLOW Change to Manual Timer mode. Title 6 May 16:00 Friend1 6 May 18:00 Friend2 Friend2 16:00 Modify Modify Change to Guide mode. Switch off Schedule List. Repeat Delete Remind DTV 19 Dave (Fri.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 2 Select Aspect Ratio. PICTURE menu.
• 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio. • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down. • Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode. When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished. Selecting ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Strengthen the contrast, brightness, colour and sharpness for vivid picture. The most general screen display status. Optimizes video for watching movies. Optimizes video for watching sports events. Optimizes video for playing games.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset” function for each Picture Mode. Image shown may differ from your TV. PICTURE Move • Sh S arpn a p ess 70 0 • Colour 60 PICTURE OK 0 R G • Colour Temp.
EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. Image shown may differ from your TV.
PICTURE CONTROL *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium/High) Dynamic Colour (Off/Low/High ) ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
Colour Gamut (Advanced Control: Wide/Standard) • Standard : Mode to use original colour area regardless of the display char- This is the function to adjust the overall colour of the screen to the feeling you want. a. • Method : 2 Points • Pattern: Inner, Outer • Red/Green/Blue Contrast, Red/Green/Blue Brightness: Colour Temperature (Medium/Warm/Cool) Colour Management System The adjustment range is -50 to +50. b.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move • Sh Sharpn a p ess arpn 70 • Colour 60 PICTURE OK • Tint 0 R G • Colour Temp. 0 W C 2 3 4 • Colour 60 OK ► • Advanced Control •• Picture Picture Reset Reset ► PICTURE CONTROL 1 70 • Tint ? All picture 0 Rsetting willGbe reset. C • Colour Temp.
TRUMOTION (Only 32/42/46/52/60LD5***, 32/37/42/47/55LE5***) It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. High : Provide smoother picture movement. Low : Provide smooth picture movement. Use this setting for standard use. Off : Turn off TruMotion Operation. User : User can adjust Judder and Blur level in TruMotion Operation, separately. - Judder : Adjust noise of the screen. - Blur : Adjust after-image of the screen.
PICTURE CONTROL POWER INDICATOR Adjust the power/standby indicator light on the front of the TV. Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode. Power Light Determines whether to set the indicator light on the front of the TV to On or Off when the power turns on.
MODE SETTING We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores. OPTION Move OPTION OK Move ● Language(Language) ● Language(Language) ● Country ● Country : UK : UK ● Disability Assistance ● Disability Assistance ● Power ● Power Indicator ● Set Reset ID ● Mode Setting Indicator ● Factory :1 :: Home Home Use Use ● Set ► ● Factory OK Selecting the environment.
PICTURE CONTROL DEMO MODE It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme.
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO Volume : Off Off :: Off ● Balance ● Sound Mode ● Auto 33 0 L R SOUND & LANGUAGE CONTROL 2 3 Clear Voice Voice IIII ●●Clear : Standard Mode Off :: Off ● Clear Voice II L 0 ● Level R 33 ◄ 3 Off - : Standard • Infinite Sound : Off • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 Select AUDIO.
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory. Offers standard-quality sound. Optimizes sound for listening to music. Optimizes sound for watching movies.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE AUDIO Move Volume ● Clear Voice II : Off ● Auto 3 L R ► Standard(User) :: Standard • Treble 50 • Bass 50 3 4 5 Sound Mode Mode ●●Sound OK 3 L R Standard(User) 0 Standard Standard(User) :: Standard Music • Infinite Sound : OffCinema • Treble 50 Sport • Bass 50 Game • Re R sett Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport or Game. Select Treble or Bass.
BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Volume ● Clear Voice II : Off : Off Mode ● Auto 3 00 L R : Standard ● Sound 3 Mode OK : Off : Off 3 0●0LBalance : Standard • Infinite Sound : Off • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 R 0◄ L R ► Close • Re R sett Select AUDIO. Select Balance. Make desired adjustment.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want.
SOUND & LANGUAGE CONTROL SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO M Mo Mod de de : St St ndar Sta ndard d d ● Soun Sound Sound Speaker ● DTV Audio 1 2 4 OK : St St ndar Sta ndard d d • Infinite Sound : Off • Treble 50 • Treble? 50 settings will be resetted. All audio • Bass 50 • Bass 50 Continue? • Reset : PCM ● Digital Audio : On ● TV Setting : Auto Speaker ● DTV Audio Out : PCM Yes No : On Setting : Auto Select AUDIO. Select Reset.
SOUND & LANGUAGE CONTROL AUDIO DESCRIPTION (IN DIGITAL MODE ONLY) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio. When Audio Description On is selected, basic audio and Audio Description are provided only for those programmes that have Audio Description included.
I/II STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Select Audio or Audio Language. 2 Select the sound output. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II ■ Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II.
SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONLY) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. 1 SOUND & LANGUAGE CONTROL 118 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 Select your desired language. 2 Select your country. * If you want to change Language/ Country selection 1 2 Select Language(Language). 3 Select Menu Language. 4 Select your desired language. Save. Select OPTION. 2 Select Country. 3 Select your country. 4 5 Select Yes or No. Save. • Press the MENU/EXIT button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL LANGUAGE SELECTION The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Audio Language OSD Information < Audio Language Selection > ► When two or more audio languages are broadcast, you can select the audio language. Display N.A Status Not Available MPEG Audio Dolby Digital Audio Audio for “Visual Impaired” 1 2 Audio for “Hearing Impaired” Select Audio or Audio Language. Dolby Digital Plus Audio HE-AAC HE-AAC Audio Select an audio language.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function. The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. When if the city name in Time Zone is changed into offset, you can change time by 1 hour.
AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.(Except for 19/22/26/32LD350C-ZA, 32/37/42/47LD420CZA, 32/37/42/47/55LE531C-ZA) The Off time function overrides the On time function if both are set to the same time. The TV must be in standby mode for the On time to work.
TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. 1 2 Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min. • When you switch the TV off, the preset sleep timer is cancelled. • You can also adjust Sleep Timer in the TIME menu.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’,‘0’,‘0’,‘0’ on the remote control handset. When France is selected for Country, password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’. When France is selected for Country, password cannot be set as ‘0’,‘0’,‘0’,‘0’ . If a channel is locked, enter the password to unlock it temporarily.
PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ”On”. Enter a password to watch a blocked programme.
PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set. Enter a password to watch a blocked programme.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in Lock System ”On”. ■ Image shown may differ from your TV.
KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off. LOCK Move ● Lock System ● Set : Off ● Block ● Input ● Lock 2 3 System Select Key Lock. Select On or Off. Programme ● Parental Block Select LOCK.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and many other topics. ■ Image shown may differ from your TV. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection 1 2 3 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
TELETEXT SPECIAL TELETEXT FUNCTIONS ■ Press the T. OPT button and then use button to select the Text Option menu. In UK(In digital mode), T. OPT button does not work. Text Option ■ Index Select the each index page. Index Time Hold ■ Time Reveal Update When viewing a TV programme, select this menu to display the time at the top right Close hand corner of the screen. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen.
DIGITAL TELETEXT *This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. TELETEXT WITHIN DIGITAL SERVICE 1 Press the numeric or P button to select a digital service which broadcasts digital teletext.
APPENDIX TROUBLESHOOTING The TV does not operate properly. The remote control does not work ■ Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Install new batteries. ■ Is the sleep timer set? Power is suddenly turned off ■ Check the power control settings. Has the Power supply been interrupted.
The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB ■ ■ ■ ■ Press the + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? ■ Adjust Balance in menu option.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 19LD35** / 19LD34** 22LD35** / 22LD34** 19LD350-ZA / 19LD350N-ZA 19LD358-ZA / 19LD359-ZB 19LD350C-ZA / 19LD351-ZB 19LD351N-ZB 19LD340-ZA / 19LD341-ZB 19LD340N-ZA / 19LD341N-ZB 19LD348-ZA / 19LD355-ZA 19LD356-ZB / 19LD345-ZA 19LD346-ZB 22LD350-ZA / 22LD350N-ZA 22LD358-ZA / 22LD359-ZB 22LD350C-ZA / 22LD351-ZB 22LD351N-ZB 22LD340-ZA / 22LD341-ZB 22LD340N-ZA / 22LD341N-ZB 22LD348-ZA / 22LD355-ZA 22LD356-ZB / 22LD345-ZA 22LD346-ZB with stand 457.0 mm x 336.0 mm x 164.9 mm 526.
APPENDIX 32LD4*** 32LD420-ZA / 32LD420N-ZA 32LD428-ZA / 32LD420C-ZA 32LD425-ZA 32LD421-ZB / 32LD421N-ZB 32LD426-ZB 32LD450-ZA / 32LD450N-ZA 32LD458-ZA / 32LD450C-ZA 32LD465-ZA / 32LD465N-ZA 32LD468-ZA / 32LD455-ZA with stand 805.0 mm x 583.0 mm x 224.0 mm 805.0 mm x 586.0 mm x 211.0 mm 799.0 mm x 555.0 mm x 207.0 mm without stand 805.0 mm x 531.0 mm x 79.9 mm 805.0 mm x 531.0 mm x 79.9 mm 799.0 mm x 506.0 mm x 73.5 mm with stand without stand 10.8 kg 9.7 kg 10.8 kg 9.7 kg 9.1 kg 8.
42LD4*** 42LD420-ZA / 42LD420N-ZA 42LD428-ZA / 42LD420C-ZA 42LD425-ZA 42LD421-ZB / 42LD421N-ZB 42LD426-ZB 42LD450-ZA / 42LD450N-ZA 42LD458-ZA / 42LD450C-ZA 42LD465-ZA / 42LD465N-ZA 42LD468-ZA / 42LD455-ZA with stand 1028.0 mm x 715.4 mm x 297.0 mm 1028.0 mm x 716.4 mm x 270.6 mm 1023.0 mm x 685.0 mm x 261.0 mm without stand 1028.0 mm x 658.6 mm x 88.7 mm 1028.0 mm x 658.6 mm x 88.7 mm 1023.0 mm x 635.0 mm x 76.6 mm with stand without stand 17.3 kg 15.5 kg 17.3 kg 15.5 kg 15.1 kg 13.
APPENDIX 32LD5*** MODELS Dimensions 32LD550-ZC / 32LD550N-ZC 32LD558-ZC / 32LD559-ZA 32LD565-ZC / 32LD565N-ZC 32LD551-ZA / 32LD551N-ZA 32LD566-ZA / 32LD568-ZC 32LD569-ZA / 32LD555-ZC with stand 800.0 mm x 563.0 mm x 207.0 mm 800.0 mm x 563.0 mm x 207.0 mm without stand 800.0 mm x 503.0 mm x 74.7 mm 800.0 mm x 503.0 mm x 74.7 mm with stand without stand 9.7 kg 8.7 kg 9.7 kg 8.
46LD5*** MODELS Dimensions (Width x Height x Depth) Weight 46LD550-ZC / 46LD550N-ZC 46LD558-ZC / 46LD559-ZA 46LD565-ZC /46LD565N-ZC 46LD551-ZA / 46LD551N-ZA 46LD566-ZA / 46LD568-ZC 46LD569-ZA/ 46LD555-ZC with stand 1115.0 mm x 752.0 mm x 270.0 mm 1115.0 mm x 752.0 mm x 270.0 mm without stand 1115.0 mm x 680.0 mm x 77.0 mm 1115.0 mm x 680.0 mm x 77.0 mm with stand without stand 18.6 kg 16.6 kg 18.6 kg 16.
APPENDIX 60LD5*** MODELS Dimensions (Width x Height x Depth) Weight 60LD550-ZC / 60LD550N-ZC 60LD558-ZC / 60LD559-ZA 60LD565-ZC / 60LD565N-ZC 60LD551-ZA / 60LD551N-ZA 60LD566-ZA / 60LD568-ZC 60LD569-ZA / 60LD555-ZC with stand 1441.0 mm x 963.0 mm x 345.0 mm 1441.0 mm x 963.0 mm x 345.0 mm without stand 1441.0 mm x 877.0 mm x 109.0 mm 1441.0 mm x 877.0 mm x 109.0 mm with stand without stand 40.0 kg 35.7 kg 40.0 kg 35.
32LE4*** 37LE4*** 32LE4500-ZA / 32LE450N-ZA 32LE4508-ZA 37LE4500-ZA / 37LE450N-ZA 37LE4508-ZA with stand 786.0 mm x 559.0 mm x 221.0 mm 907.0 mm x 630.0 mm x 270.0 mm without stand 786.0 mm x 500.0 mm x 39.9 mm 907.0 mm x 565.0 mm x 39.9 mm with stand without stand 12.4 kg 10.6 kg 14.6 kg 12.
APPENDIX 19LE3*** MODELS Dimensions (Width x Height x Depth) Weight 19LE3300-ZA / 19LE330N-ZA 19LE3308-ZA / 19LE3400-ZA 19LE340N-ZA / 19LE3408-ZA 19LE3310-ZB / 19LE331N-ZB 19LE3410-ZB / 19LE341N-ZB with stand 471.2 mm x 365.9 mm x 155.4 mm 471.2 mm x 365.9 mm x 155.4 mm without stand 471.2 mm x 315.5 mm x 34.4 mm 471.2 mm x 315.5 mm x 34.4 mm with stand without stand 3.4 kg 3.2 kg 3.4 kg 3.2 kg 19LE3*** : DC 24 V, 1.6 A, 38 W AC-DC adaptor : 24 V , 3.
MODELS Dimensions (Width x Height x Depth) Weight 26LE3*** 26LE3300-ZA / 26LE330N-ZA 26LE3308-ZA 26LE3310-ZB / 26LE331N-ZB with stand 652.0 mm x 480.8 mm x 191.4 mm 652.0 mm x 480.8 mm x 191.4 mm without stand 652.0 mm x 420.3 mm x 34.4 mm 652.0 mm x 420.3 mm x 34.4 mm with stand without stand 6.1 kg 5.1 kg 6.1 kg 5.1 kg 26LE3*** : DC 24 V, 1.8 A, 48 W AC-DC adaptor : 24 V , 3.
APPENDIX MODELS Dimensions (Width x Height x Depth) Weight 37LE5300-ZA / 37LE530N-ZA 37LE5308-ZA / 37LE530C-ZA 37LE5310-ZB / 37LE531N-ZB 37LE5318-ZB / 37LE531C-ZA with stand 905.0 mm x 630.0 mm x 270.0 mm 905.0 mm x 630.0 mm x 270.0 mm without stand 905.0 mm x 568.0 mm x 39.9 mm 905.0 mm x 568.0 mm x 39.9 mm with stand without stand 15.3 kg 12.8 kg 15.3 kg 12.
MODELS Dimensions (Width x Height x Depth) Weight 47LE5300-ZA / 47LE530N-ZA 47LE5308-ZA / 47LE530C-ZA 47LE5310-ZB / 47LE531N-ZB 47LE5318-ZB / 47LE531C-ZA with stand 1126.6 mm x 757.9 mm x 284.4 mm 1126.6 mm x 757.9 mm x 284.4 mm without stand 1126.6 mm x 692.0 mm x 29.3 mm 1126.6 mm x 692.0 mm x 29.3 mm with stand without stand 22.9 kg 19.6 kg 22.9 kg 19.
APPENDIX IR CODES *This feature is not available for all models. Code (Hexa) Note Energy Saving R/C BUTTON 08 POWER R/C BUTTON(POWER ON/OFF) 0B INPUT R/C BUTTON 79 RATIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. Type of Connector; D-Sub 9-Pin Male No.
APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.154 OPTION ● Country ● Power ● Power Indicator ID Setting Indicator ● Factory ::11 ► Reset : Home Use OK : UK ● Disability Assistance ► APPENDIX 150 : UK ● Disability Assistance ● Mode 3 Move ● Country ● Set 2 OPTION OK ● Language(Language) ● Factory 1 Move ● Language(Language) Reset ◄ ● Set ID ::11 ● Mode : Home Use Setting 1 ► Close Select OPTION. Select Set ID.
Communication Parameters ■ ■ ■ ■ ■ Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code ■ Use a crossed (reverse) cable. Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Command Reference List COMMAND COMMAND 1 2 a DATA (Hexadecimal) 00 to 01 01. Power k 02. Aspect Ratio k c Refer to p. 152 03. Screen Mute k d Refer to p. 152 04. Volume Mute k e 00 to 01 05.
APPENDIX 01. Power (Command: k a) ► To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [a][ ][Set ID][ ][OK/NG][Data][x] ► To show Power On/Off. Transmission Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) Ack 05.
09. Tint (Command: k j) ► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission 13. Treble (Command: k r) ► To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 154. Ack Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 154.
APPENDIX 17. Energy Saving (Command: j q) 19.Tune Command (Command: m a) ► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission ► Select channel to following physical number. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
21. Key(Command: m c) ► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 148. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 23. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 LSB 0 0 0 External Input External Input 22. Control Back Light (Command: m g) 0 0 0 Input Number Data 0 0 0 0 DTV 0 0 0 1 Analogue ► To Control the back light.
APPENDIX OPEN SOURCE SOFTWARE NOTICE The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUTABLES: • Linux kernel 2.
■ copyright © 1993, 1994, 1995, 1996 Rick Sladkey. ■ copyright © 1998-2003 Wichert Akkerman. ■ copyright © 2002-2008 Roland McGrath. ■ copyright © 2003-2008 Dmitry V. Levin. ■ copyright © 2007-2008 Jan Kratochvil. • tinyxml: copyright © 2000-2006 Lee Thomason • xyssl: Copyright (C) 2009 Paul Bakker • zlib: copyright © 1995-2005 Jean-loup Gailly and Mark Adler All rights reserved.
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
MOZILLA PUBLIC LICENSE Version 1.1 --------------1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.
APPENDIX 6.3. Derivative Works.
10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Serial No.
