User manual

26
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
If your access point or wireless router that supports PIN or WPS, it’s available to use your access point
or wireless router within 120 counts. You do not need to know the access point name (SSID: Service
Set Identifier) and security code of your access point or wireless router.
Simple setting (WPS-button mode)
Simple setting (WPS-button mode)
Press PBC mode button of AP and press ‘Connect’ button.
Connect
Caution: Check if PBC mode button is available for your AP.
Next
1
Repeat step 1-4 on P.24.
2
Select Simple setting (WPS-button
mode).
3
Select Connect.
Select the wireless network setting type.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
Next
Exit
Previous
Exit
Previous
4
Repeat step 4-5 on P.20.