User manual
135
PICTURE CONTROL
PICTURE CONTROL
•16:9
The following selection will allow you to adjust the pic-
ture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
• Original
When your TV receives a wide screen signal it will auto-
matically change to the picture format broadcast.
• Full Wide
When TV receives the wide screen signal,it will lead
you to adjust the picture horizontally or vertically, in
a linear proportion,to fill the entire screen fully.
4:3 and 14:9 video is supported in full screen with-
out any video distortion through DTV input.
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed
image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
Just Scan
Original
Full Wide
1
Select Aspect Ratio.
2
Select the desired picture format.
• You can also adjust Aspect Ratio in the
PICTURE menu.
• For Zoom Setting, select 14:9, Zoom and
Cinema Zoom in Ratio Menu. After com-
pleting Zoom Setting, the display goes
back to Q.Menu.