Owners manual

94
PICTURE CONTROL
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not
applied.
Picture Wizard
With Picture Wizard, you can adjust the picture quality of
the original image.
Next
Previous
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
If you stop the setting before the final stage,
the changes will not be applied
The adjustment value is saved to Expert1.
Once the Picture Wizard sets the image
quality, the Energy Saving is changed into
Off.
If the picture quality setting of Expert1 is
changed, use the Picture Reset before
entering the Picture Wizard to reset the
picture quality setting.
Standard : mode to set standard picture
quality.
Preferred : mode to set user preferred
picture quality rather than standard pic-
ture.
1
Select PICTURE.
2
Select Picture Wizard.
3
Adjust Standard(Black Level,
White Level, Tint, Colour,
Horizontal Sharpness, Vertical
Sharpness, Backlight) or
Preferred(Black Level, White
Level, Tint, Colour, Sharpness,
Dynamic Contrast, Colour
Temperature, Backlight).
4
Select input source to apply
the settings.
5
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
Backlight 70
Contrast 100
Brightness 50
Sh
•Sh
•Sh
Sh
arpn
arpn
arpn
ess
ess
ess
0
70
70
70
PICTURE
Picture Wizard