User's Manual

91
WARRANTY
ENGLISH
Problem Cause Prevention
%
Surface is not level
%
Oven is tipping
1. Range not leveled
2. Anti-tip device not installed correctly
%
Check with installer first
Anti-tip bracket
Approximately
0.65"
(16.5 mm)
Level both sides of range
Screw must
enter wood or
concrete
Wall plate
1
2
Use carpenter’s level to
check level.
%
Flames too big on
converted cooktop
(NP
󱈓
LP)
The installer missed part of the conversion.
(Check 2 parts: regulator, cooktop valve).
%
Check with installer first
%
Refer to installation manual
regulator cooktop valve
%
Flame is too small or
too large
1. Variable gas pressure
2. Installer did not check
%
Check with installer first
Center adjustment screw