User's Manual

WIT-300H User Manual
Issue: 0.4C Date: 24/May/2005
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
23
Notes : Even though an Ear-Mic is attached to a WIT-300H, a user can hear incoming call ring tone
sound through the Speaker not Ear-Mic.
Condition
1. When audible signals are heard, the call information will be displayed.
2. Caller Groups can be distinguished with difference ring type.
3. With audible signal, Ring LED will be flashed.
4. If pressing side button [ UP (
) ], [ DOWN ( ) ] during conversation, the receiving voice level is
controlled.
5. When conversation is over, press [End] (
) button to release the call. Then the phone ( ) icon
is will be disappeared and then the call will be released.
5.3.3 Transferring the Call
Description
This function is to transfer the current call to another user.
Operation
1. Transfer a current call with dialing the number of CO or ICM.
 During a talking  Press
[ Trans/PGM ]
(
)
or
[LEFT]
in navigation key + ‘0’  Dial the
number to transfer (Inform the called station)  Press
[ End ]
(
) to release a call.
2. Transfer a current call using FLEX button.
 During a talking  Press
[ Trans/PGM ]
(
)
or
[LEFT]
in navigation key + ‘0’  or
[RIGHT]
in
navigation key Select Flex button  (If flex button is CO button, Dial the number to transfer) ->
(Inform the called station)  Press
[ End ]
(
) to release a call.

NOTE
: A user can make either a .screened or unscreened transfer.
( Screened Transfer
When the called station answers, inform the transfer.

 
Press [ End ] ( EMBED PBrush ) to complete the transfer.