Specifications

TITLE : Specifications for approval (RBHP-B213B)
(CUSTOMER P/NO : EAT63433501 )
REV 1.6 (31 / 68)
R
E
V
APPD CHKD DSGD
DOCUMENT NO.
6-3
RBHP-B213B
LG Innotek Co., Ltd
1.4 2017. 07.14. Rev1.4 Released
1.5 2017. 08.10. Rev1.5 Released
(30) - 4021
1.2 2017. 05.23. Rev1.2 Released
1.3 2017. 06.27. Rev1.3 Released
1.6 2017. 09.06. Rev1.6 Released
10. Electrical Specification
10.3 I/O characteristics
4) Sequencing of reset and regulator control signals
- Description of control signals
*WL_REG_ON
: Used by the PMU to power up the WLAN section. It is also OR-gated with the BT_REG_ON input to
control the internal BCM88359 regulators. When this pin is high, the regulators are enabled and the
WLAN section is out of reset. When this pin is low, the WLAN section is in reset. If both the
BT_REG_ON and WL_REG_ON pins are low, the regulators are disabled
*BT_REG_ON
: Used by the PMU(OR-gated with the WL_REG_ON)to power up the internal BCM88359 regulators. If
both the BT_REG_ON and WL_REG_ON pins are low, the regulators are disabled. When this pin is low
and WL_REG_ON is high, the BT section is in reset
3) WLAN host interface strap selection
*VIO = 3.3V
Item Symbol Min Typ Max Unit
Input high voltage VIH 2.00 - VIO+0.1 V
Input low voltage VIL - - 0.8 V
Output high voltage@2mA
VOH
VIO-0.4 - - V
Output low voltage@2mA
VOL
- - 0.4 V
PCIE_EN Mode
High PCIe
SDIO_DIS
High
Low 1.8V SDIO Low
Low
3.3V SDIO
- PCIE_EN, SDIO_DIS, SDIO_PAD
SDIO_PAD
Low
High
High
low