Owner's Manual

20
SETTINGS
SETTINGS
Select the Setup icon from the menu.
General settings for the use environment configuration, and product settings and SVC setting for using air
conditioner/ventilation products are available.
General setting
Function
Description
Note & Option
Language
Set the language you will use
English / Español / Français
Use type
Set the type of use of wired remote controller
Single / Dual
Temp. unit
Set the temperature unit to be displayed on the screen.
Celsius
Fahrenheit
Minimum unit can be set to
Screen saver
To use the standby screen, change the Always on setting to on, then
set the rest of the items in detail.
Screen
Saver Timer
LCD Brightness
In Idle
Contents
Off
15 s
30 s
1 min
Off
25 %
50 %
75 %
100 %
Current Status Time
& Date Weather
(need to connect wi-
fi) Air Quality (need
to install PM Sensor)
If the standby screen is used at 30% brightness, the life of
the LCD may be reduced.
Edit Schedule
mode
Set the operating standards for each schedule mode.
Set detailed operating standards for air conditioner
and ventilation products by Home, Sleep, Away, Awake
schedule mode of the current season.
Refer to the content of Schedule setting- Edit schedule
mode.
Date & Time
Set the date, time, and summer time to display on the screen.
-
Vacation/event
You can use the product by temporarily changing the schedule
operation.
Select by toggling on/off of the function usage and set
the setting period and product operation standard in
detail.
Refer to the content of Schedule setting- Vacation/
Event.
Schedule
Initialization
You can reset the schedule by deleting it all at once.
-
Lock
This function locks the button on the remote controller to prevent
children and others from using it recklessly.
All Lock / Running mode Lock / Fan speed Lock/
Temperature Lock / Set temperature Lock
System Reboot
You can restart the system.
Humidity display
Set whether to display humidity value.
ON/OFF
When it is set to “On”, the humidity value is different
depends on the humidity detection location setting
(installer setting).
1) Remote controller: Display the humidity that remote
controller sensed
2)
Indoor unit : Display the humidity that indoor unit
sensed. However, if no information is received, no
humidity is displayed.