User's Manual

Correcting Dialing Mistakes If you make a mistake while dialing a number, press BACK
once to erase the last digit entered, or hold down BACK for at least 2 seconds to go to the
standby mode.
Redialing Calls
1. Press TALK twice to redial the last number you dialed. The last 120 numbers (missed,
received, dialed) are stored in the call history list and you can also select any of these to redial.
Receiving Calls
1. When the phone rings or vibrates, press TALK to answer.
2. Press twice to end the call.
Tip
To choose answer options:
Menu -> 9. Settings -> 4. Call Settings -> 1. Answer Options. Choose
from the
following options:
Flip Open/ Any Key/ Send Key
Only/ Auto Answer
Note
If you press
or (the side keys), while the phone is ringing, the ringing or vibration is muted for that
call.
Quick Access to Convenient Features
Lock Mode
Sets your phone to require a 4-digit password in order to use the phone.
To quickly lock your phone press for three seconds. To cancel, press Left Soft Key Unlock,
enter the password and press .
Mute Function
The Mute Function is used during a phone call. To quickly activate Mute press Left Soft Key
Mute, then to cancel press Left Soft Key Unmute.
Volume Quick Adjustment
Use the side keys to adjust the ringer volume while in standby mode, and the earpiece volume
during a phone call. The upper key increases the volume and the lower key decreases the
volume.
Call Waiting
Your cellular service may offer call waiting. While a call is in progress, two beeps indicate
another incoming call. When call waiting is enabled, you may put the active call on hold while
you answer the other incoming call. Check with your cellular service provider for information
about this function.
Note
Until you change it, the default lock code/password is the last 4
digits of your phone number.