User's Manual

Speaker Phone
Speaker Phone
50
5. Speaker Phone
This function is a convenient feature, which enables
you to make a call using the Speaker Phone ( )
button in on-hook state.
Troubleshooting
Troubleshooting
51
6. Troubleshooting
Please check the following items before contacting service center.
Item Remedy
• The LCD repeats on and off when you plug-in
the adapter while battery switch is off.
• Phone repeats abnormally power-on and
power-off after a few second when you plug-in
the adapter while battery switch is on and
phone is power-off.
• There is no charging display when you plug-in
the adapter while the phone is power on.
Bell sound isn’t heard.
Battery fails to charge.
Call cannot be received.
When I press button to call, can’t hear the dial tone.
Because of noise and cross talking,
call status is bad.
Phone doesn’t operate at all.
• Check that the phone is installed correctly.
• Check that the battery is fully charged.
• Check that the power is on.
Keep away from electrical application such as TV, computer,
radio and so on.
Check that phone cord or power is connected correctly.
Check the current status of Rx call mode settings in data
settings menu. Voice option should be selected.
Check that the authorized adaptor (5V/1A) for LSP- 3600 is
correctly connected to the DC powerconnector of the phone
and Battery ON/OFF switch is ON.
If bell sound is low, please adjust the volume level and make
sure that Light Mode is not selected.
Check that the adapter is the approved from LG.
Adapter should be 5V(DC), 1A.