User's Manual Part 2
Table Of Contents
- SAFETY PRECAUTION
- Safety Information
- Information for Environmental Preservation
- Safety Information
- Battery Installation
- Specification of each part
- Dimension (unit: mm/inch)
- Environmental Requirement
- INSTALLING CALIBRATION SOFTWARE
- Connection Types
- CALIBRATION SOFTWARE
- Usage
- Service Manual
- Maintenance
- TROUBLESHOOTING
- Solution for firewall block
- Supplement. Wireless AP Set Up Instruction (Model : Cisco Linksys EA9200)
ENGLISH
82
Image Functions
5
3
2
4
1
1
Image Viewer
• The Calibration, User BPM, Validation, and EI menus include an image viewer that lets you view the acquired images.
• An image is loaded and displayed when it is acquired or clicked.
• Information about the image is displayed in the following sections.
- Image Loaded: Indicates whether an image is loaded in the image area.
* When an image is loaded: Image Loaded.
* When no image is loaded: Image not Loaded.
- Min: Minimum pixel value within the image area.
- Max: Maximum pixel value within the image area.
- Med: Median value of the image.
- Mean: Mean value of the image.
- Std: Standard deviation value of the image.
- Bad Pixel Count: Bad pixel count in the image area.
- 14B = N, 8B = M: Representation of the pixel value at (x,y) in bits.
- Bad Pixel Count: Bad pixel count in the image area.
- 100%: Percentage of the image shown in the image area compared to the entire image size.
- (X x Y): Size of the entire image.