User's Manual Part 2
Table Of Contents
- SAFETY PRECAUTION
- Safety Information
- Information for Environmental Preservation
- Safety Information
- Battery Installation
- Specification of each part
- Dimension (unit: mm/inch)
- Environmental Requirement
- INSTALLING CALIBRATION SOFTWARE
- Connection Types
- CALIBRATION SOFTWARE
- Usage
- Service Manual
- Maintenance
- TROUBLESHOOTING
- Solution for firewall block
- Supplement. Wireless AP Set Up Instruction (Model : Cisco Linksys EA9200)
ENGLISH
76
MAKING CONNECTIONS-Wireless Connection
1 The Default Wireless Settings as below.
- SSID : LGEDXD
- Password : lgedxd2000
2 It is possible to change the Wireless Settings using LG DXD Calibration Software.
• Please see the Service manual (Wireless AP configuration) for details.
3 Please reboot the Detector after removing the main cable on Detector.
(If the main cable is disconnected when the power is turned on: Wireless mode)
4 PC settings and connection with Detector are same with wired Connection.
Please refer to the "MAKING CONNECTIONS - Wired Connection".
• Tip : Refer to Wireless AP Set Up Guide
- "Supplement. Wireless AP Set Up Instruction
(Model : Cisco Linksys EA9200)"