User's Manual

184
Tools
Tools
2. Make sure that the receiving end is ready for
receiving the data
] “Yes”
• When sending all items, enter a terminal security code
(P104) and authentication password
.
: Enter the same password as that entered from the
receiver's terminal.
Receiving Data
1. Select “Receive Ir data” from Tools menu (P179)
2. Perform sending operation on sender's terminal
3. “Receive”/“Receive all”
] “OK”
• When receiving all items, enter a terminal security
code (P104) and authentication password
.
• When receiving 1 bookmark, confirm a bookmark
registration screen displayed and press I [Done].
• The Phonebook will be registered to the available
smallest memory number.
• The bookmark will be registered at the top of the
bookmark list.
• You can view a received phonebook by “Search
phonebook” (P66) and bookmark by “Bookmark”
(P121).
• If you remove the battery pack or turn off the handset
while receiving a bookmark via infrared communication
and receiving is interrupted, the bookmark received
before the interruption will not be saved.
: Enter the same password as that entered from the
sender's terminal.
Using Calculator
C
]
(Tools)
]
4
You can perform calculation such as addition, subtraction,
multiplication and division. Use the numeric buttons to
enter numbers.
1.
From the Tools menu (P179), Select “Calculator”
< Calculator screen >
• *: Used to enter decimal point.
• #: Used to enter the parenthesis.
• Q: Used to delete the number to backward from
the end.
• I[AC]: You can reset all the number and calculation.
Using the Function Menu of the Calculator Display
1. From the Calculator display ( See above ), M[func]
]Select from the following function menu items
+/-
Switches between positive and negative numbers.
(period) Does not go to step 2.
= func. AC
Calculator