User's Manual

98
Settings
Settings
Move up
You can move the selected network upward. The
network moved upward is more preferred.
Move down
You can move the selected network downward. The
network moved downward is less preferred.
: If you register multiple networks, you can use this menu.
Information
• If the network is not registered, [Menu], [Delete] of soft key
area on preferred list to register will not be displayed. To add
new network, press I [Add], select and register.
• The registered data is saved in UIM.
Displaying the Network Name
C
]
(Settings)
]
54
You can set whether to display the name of the network
currently set on the Stand-by display.
Setting item/Setting at purchase > P251
1. From the Settings menu (P85), “Network” ]
“Network name display” ] “Display on”/“Display
off”
Changing a Host from i-mode
Setting / Changing the Host
C
]
(Settings)
]
6
Normally, you do not need to change the setting.
You can set a host to use services of various providers
other than i-mode. If the host is changed, i-mode
becomes unavailable.
Setting item/Setting at purchase > P251
1. From the Settings menu (P85), “Host selection” ]
From the Host selection screen, I [Add] ] Enter
your terminal security code ]C ]Set the
following items ]After setting,
I
[Done]
• The host set is displayed on the Host selection
screen with attached to it.
Host name
Enter the name displayed on the Host selection
screen.
Host address
Enter the address of the host.
Access point
Enter the Access point (URL, etc.).