User's Manual

COMMAND1 COMMAND2 DATA1 DATA2 DATA3

44. Reset f k 00H–02H

45. Power Saving f l 00H–03H

46. Power Indicator f o 00H–01H

47. Serial No. f y FFH

48. S/W Verison f z FFH

49. Input Select x b 60H–C0H

Transmission/Receiving Protocol

Transmission

[Command1][Command2][][Set ID][][Data][Cr]

[Command 1] First command (k, j, m, d, f, x)

[Command 2] Second command (a to u)

[Set ID] Set up the Set ID number of product. range : 01H to 63H. by setting

'0', server can control all products.

In case of operating with more than 2 sets using set ID as '0' at the

same time, it should not be checked the ack message. Because all

sets will send the ack message, so it's impossible the check the

whole ack messages.

[Data] To transmit command data.

Transmit 'FF' data to read status of command.

[Cr] Carriage Return

ASCII code '0 x 0 D'

[] ASCII code Space (0 x 20)

OK Acknowledgement

[Command2][][Set ID][][OK][Data][x]

*The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At

this time, if the data is in data read mode, it indicates present status data. If the data is in data write

mode, it returns the data of the media player/computer.

Error Acknowledgement

96 Appendix C Command reference ENWW