This device is not intended for sale in the USA. Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “ Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions: (1) This device & its accessories may not cause harmful interference. (2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device has been tested for typical body-worn operations with the distance of 0.79inches (2.0cm) from the user’s body.
Some of the contents in this manual may differ from your phone depending on the software of the phone or your service provider. This handset is not recommended for blind disability person due to touch screen keypad.
Your Phone Phone Components microSD™ memory card socket Charger/USB Port Earpiece Lets you hear the caller and automated prompts. Main LCD Lock / Unlock key Multi-tasking key SEND key Press this key in standby mode to quickly access the most recent, missed, dialed and received calls. END / Power Ends or rejects a call. Turns the phone on/off. Press once to return to the standby screen. 14 LG Camera key Press to start the Camera function. Press and hold to start the Video record function.
Slide Open View Del Deletes digits and letters. Text Msg Press to input “@”. Press to input “.com”. Mobile Email VideoCall Key Contact list BigPond Home Key Caps Press to change between Upper Case and Lower Case. Fn Press to input symbols and numbers on Qwerty key pad. Right Up Down Left Press to move to the next row. Space Press to create a space between words. Sym Press to open the menu with Symbol entry options.
Your Phone Rear View Battery cover Flash Battery SIM card socket External camera lens microSD™ memory card socket 16 LG | User Guide
Getting Started Installing the SIM Card and Battery 1 Remove the battery cover Press the battery cover release latch. The battery cover should lift off easily. 2 Remove the battery Lever the bottom edge of the battery and remove it carefully from the battery compartment. WARNING: Do not remove the battery when the phone is switched on, as this may damage the phone.
Getting Started 3 Install the SIM card Slide the SIM card into the SIM card holder. Make sure that the gold contact area on the card is facing downward. To remove the SIM card, pull it gently in the opposite direction. 18 LG | User Guide 4 Install the battery Insert the top of the battery first into the top edge of the battery compartment. Ensure that the battery contacts align with the terminals on the phone. Press the bottom of the battery down until it clips into place.
5 Charging your phone Lift the charger port cover on the top side of your GW382f. Insert the charger connector to the phone (‘B’ side of the connector has to be facing up when connecting to the phone) and then plug into the wall socket. Your GW382f will need to be charged until a message reading “Battery full. Please unplug charger to save energy.” appears on the screen. WARNING: Use of unauthorized accessories could damage your phone and void your warranty.
Getting Started Installing a Memory Card You can expand the memory available on your phone by using a microSD™ memory card. The GW382f will support up to a 16 GB microSD™ memory card. TIP! A memory card is an optional accessory. 1 Lift the memory card cover and insert a microSD™ card with the gold contact area facing downwards. Close the memory card cover so that it clicks shut. 20 LG | User Guide Note: If your memory card has existing content it will automatically be filed in the correct folder.
On-Screen Icons The table below describes various display indicators or icons that appear on the phone's display screen.
Touch Calibration Set your touch screen for ease of use. Touch and press the ‘+’ markers to calibrate the screen. • Once you’ve finished calibrating your screen, Save the settings. Note: To reset the touch calibration, tab. Touch touch , and the , and choose Touch Calibration.
Start Up Guide After you install SIM card and battery, and turn on the GW382f, you will see Start Up Guide on the screen. Touch Start to begin the Start Up Guide feature. Touch to play the animated Guide for that subject. Or, touch to move on to the next Guide.
General Functions Making a Call Making a Call with the Send Key 1 Make sure your phone is powered on. 2 Touch and enter a phone number using the touch pad or slide open the qwerty pad and enter a phone number using the qwerty keys. To edit a number on the display screen, simply press the key to erase one digit at a time. – Press and hold the key to erase the entire number. 3 Press the [SEND] key to call the number. Or touch on the touch pad.
Ending a Call When you have finished a call, press the [END] key. Making a Call from the Contacts You can store frequently called names and phone numbers in the SIM card as well as in the phone memory known as the Contacts. You can dial a number by simply selecting a name in the contacts and pressing the [SEND] key. Making a Video Call You can make a video call in a 3G-covered service area if the user you are calling also has a 3G video phone in a 3G-covered service area. You can also receive video calls.
Getting Started Changing your video call settings 1 Press for longer or for while, select , and choose . 2 Select Video call. 3 Choose the settings of your video calling. Determine whether to Use Substitute Image and select one, switch on the Mirror (so you can see yourself on screen). Making a video call from Contacts It is easy to call anyone whose number you have stored in your Contacts. Press the down navigation key to access the contacts list. Scroll to your chosen contact.
Adjusting the Volume Setting Profiles During a call, if you want to adjust the earpiece volume, use the side volume keys of the phone. In the Standby screen, you can adjust the ring volume using the side volume keys. Press either of the side volume keys. You can set your Ringtone to Vibrate All, Alarm Only or Silent All.
Getting Started You can also adjust the touchtone sound and vibration volume from the Touchtone tab. 28 LG | User Guide Vibration Mode (Quick) Vibration Mode can be activated by touching and holding from the dial pad. You can also set Vibration Mode by pressing and holding down side volume key as well.
The phone will display ‘Vibrating Mode On’. If you would like to turn Vibration mode Off, touch and hold again. Entering Text You can enter alphanumeric characters by using the phone’s touch pad. For example, storing names in the Address Book, writing a message or scheduling events in the calendar all require text to be entered. The following text input modes are available on the phone. Using the Symbol Mode Signal Strength If you are inside a building, being near a window may give you better reception.
Getting Started 123 Mode (Numbers Mode) 1 When you are in the T9 predictive text input mode, begin entering a word by pressing the touch screen keys to . Press one key per letter. Changing the Text Input Mode • The word changes as letters are You can change the text input mode typed - ignore what is displayed by touching pressing the Text Input on the screen until the word is Mode toggle button on the typed completely. touch screen.
2 Enter the whole word before editing or deleting any letters. 3 Complete each word with a space by touching . To delete letters, touch . Touch and hold down to erase the entire text entry. Note: Pressing the [END] key will save your unsaved message in the Drafts folder. Using the ABC Mode Use the touch pad keys to enter your text. 1 Touch the touch key labeled with the required letter: • Once for the first letter • Twice for the second letter • And so on 2 To insert a space, touch .
Getting Started Using the 123 (Numbers) Mode The 123 Mode enables you to enter numbers in a text message (a telephone number, for example) more quickly. Touch the keys corresponding to the required digits before manually switching back to the appropriate text entry mode. T9 Dictionary The T9 Dictionary is a feature that allows the user to add any unique or personal words to the T9 standard language database. The T9 Dictionary function can be selected from the Text Entry Settings by using Options .
Note: Some fields may allow only one text input mode (e.g. telephone number in Address Book fields). Using the Korean Mode To input a symbol in the text entry key and select field, press the a symbol from touch screen. Or to enter a symbol from the qwerty keys, just press and then press the corresponding key. To return to ABC mode, press again. Complete each word with a space by pressing . To delete a character, press key. When you use Touch Keypad Allows you easily input the letters.
Getting Started When you use Qwerty Keypad Open the slide and touch . Choose Text Entry Settings and Show Key Guide. You can see the Korean key guide on the monitor. To input numbers, touch . Touch once, and you can see the Korean key guide as below. To return its normal input mode, touch again.
Address Book From standby screen, touch , choose and touch . You will see following Address Book’s submenus. Or simply touch from standby screen. • : Search a contact. • : Shows your contacts by first letter/character. • : Shows your contacts designated as Favorites. Contact List This menu allows you to save and manage contact address information. The Contact List's functions allow you to add a new address or search saved contact addresses by name.
Address Book New Contact This menu allows you to add a new contact address. You can enter contact address information, including: name, phone numbers, email addresses, group information, pictures, ringtone and a memo. 1 From the standby screen, Touch and touch . 36 LG | User Guide 2 Touch to set a Picture ID for a contact by using a saved picture from Pictures or taking a new picture of the contact person. Choose from No picture, Pictures or Take New Picture.
3 Touch contact. to save the Caller Groups This menu allows you to manage group information. By default, there are 4 groups: Colleague, Family, Friends and School. Or you can put a contact in No Group. You can also configure a ring tone for a group so that the group ring tone sounds when a call from a specific contact address within that group is received and there is no ring tone configured for the specific contact address. Speed Dial You can assign a frequently-called contact to a speed dial list.
Address Book Management This menu allows you to copy information from your SIM card, e.g. name, handset number, etc. to your handset. If a name is duplicated during the copying operation, the information is also duplicated. You can also copy entries from the SIM card to the phone memory and entries from the handset memory to the SIM card (not all the data will be copied). From this menu, you are also able to delete entries in the SIM card and the Handset.
In-Call Menu Your phone provides a number of control functions that you can use during a call. To access these functions during a call, touch to unlock the screen and then touch . During a Call The menu displayed on the handset screen during a call is different from the default main menu displayed when in the Standby screen, and these options are described below. Making a Second Call You can select a number you wish to dial, to make a second call. 1 Unlock the Screen.
In-Call Menu Answering an Incoming Call Muting the Microphone To answer an incoming call when the handset is ringing, simply press the [SEND] key or touch . The handset is also able to warn you of an incoming call while you are already on a call. A tone will sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call Waiting, is only available if your network supports it.
Conference Calls Setting Up a Conference Call The conference service provides you with the ability to have a simultaneous conversation with more than one caller. The conference call feature can be used only if your network service provider supports this feature. Once a conference call is set up, calls may be added, disconnected or separated (that is, removed from the conference call but still connected to you) by the person who set up the conference call.
In-Call Menu Private Call in a Conference Call To have a private call with one caller from a conference call, touch and select Private Call from the Conference Call option. When the numbers of the callers are displayed, select the one you wish to speak in private with. Only the person who initiates the Conference Call can initiate a Private Call. Ending a Conference Call The currently active conference call can be disconnected by pressing the key.
Your Standby Screen From here you can access all menu options, make a quick call and view the status of your phone - as well as many other things. Touch Screen Tips The standby screen is also a great place to get accustomed to the touch screen. To select an item, touch the icon accurately. Your GW382f can be set to vibrate slightly when it recognises you’ve touched an option. To scroll through lists, touch the last item visible and slide your finger up the screen.
Your Standby Screen The Quick Keys The quick keys on your standby screen provide easy, one-touch access to your most used functions. 44 LG Touch to bring up the touch Dialing Keypad to make a call. Input the number as you would use a normal keypad and touch or press the hard key. Touch to open your contacts and search for the number you want to call. You can also create new contacts and edit existing ones. Touch to access the Messages options menu. From here you can create a new outgoing Message.
Home Screen Visual Contacts Allows you to use Widgets and even add them to your Home screen. • Click to open the Home Screen. • Drag a Widget from the roll-out Menu onto the Home screen. This will enable you to use Widgets. • You can play songs, add memos, check the calendar, play slide show, set an alarm or add events directly from the standby screen using Home Screen. • Click again to close the Home Screen.
Your Standby Screen • Select to choose a contact. You can choose up to 6 contacts for one page. • If you want to delete a contact from this screen, touch . 46 LG | User Guide • Touch to align the contacts on the screen. Note: Touch and the contact will have a slight shadow around it. If you slightly shake or move the phone, the contacts will float in the again and the screen. Touch contacts will be fixed and not be moved by the phone’s status.
• Touch to finish editing the Contacts on this screen. Then to access your Contacts, simply touch on their corresponding icon. Touch to call, to send a message and to check messages received from that person. • If you want to edit one of the Contacts, touch and hold the contact or the margin space of the screen. It will turn to the Edit screen. Shortcuts Add your favorite menu on the standby screen. • Touch and hold down any of the items and it will turn to the Edit Screen.
Your Standby Screen Annunciator With GW382f’s Annunciator, you can quickly connect to the Music Player, Bluetooth service and more. Touch the top side of the standby screen. • To check Inbox, touch . To send a Mobile Email, touch . To check Voicemail, touch . • If you want to set an Alarm, touch . To view the Calendar and add new events, touch . • You can use Music Player to edit a playlist or turn on Bluetooth. • You can set your profile by touching .
Menu Tree Touch in the standby screen to open a Top menu.
Messaging This menu includes functions related to SMS (Short Message Service), MMS (Multimedia Message Service), voice mail as well as the network's service messages. • Send-A-Card: You can send a greeting card by SMS or MMS. Check the availability of this service, pricing and tariffs with your network operator and/or the service provider. New Message 1 In the standby screen, select 2 Touch Create Message. .
Inserting Multimedia files in outgoing messages is easy. Press the button and select an option from below: • Picture: You can preview the selected picture. Touch to insert the selected picture. • Audio: You can insert from your saved Audio files. • Video: You can insert from your saved Video clips. • New Picture: You can insert a new image taken from the camera by touching [Capture]. Note: Refer to page 77 for camera options. • New Audio: You can record a new audio clip by touching .
Messaging • Template - Text: You can easily insert frequently used sentences in the text message. - Multimedia: Preset multimedia templates are available. - Signature: Input your own created signature. • More: Allows you to insert Subject, vCard, vCalendar, vNote, vTask or Contact. Note: vCard, vCalendar, vNote, vTask and Contact are created by the Address Book, Calendar, Notepad and Tasks functions. Go to the corresponding sections for more detailed information.
• Save to Drafts: Saves the selected message to Drafts. • Writing Font Size: Set the Writing Font size to Small, Medium and Large. • Cancel Message: Allows you to exit the Message without saving your input message. Sending a Message After completing a message using the Insert/Options, select Send To to send a message. • Enter the recipient(s). From , you can choose an option item below. - Enter Number: You can input the recipient(s) number using the Touch keypad or Qwerty keypad.
Messaging Message folders Inbox The folder structure on your GW382f was designed to be fast and easy to use. • Inbox: All the messsages you receive are placed into your Inbox. • Drafts: If you don’t have time to finish writing a message, you can save what you’ve done so far here. • Outbox: This is a temporary storage folder where messages are stored while being sent. You will be alerted when you receive a message. They will be stored in the Inbox. In the Inbox, you can identify each message by icons.
Standard View The following options are available in standard view: • Add to Address Book: You can save the sender's phone number in the Contact List. • Select Slide: If the multimedia message has more than one slide, you can select and move to the desired slide. • Extract Data: You can make a voice call or send a message. You can save the number As New contact or Updating Existing.
Messaging Outbox Outbox is a temporary storage place for messages waiting to be sent. When you press the [SEND] key, you can make a call to the number of the recipient number of the selected message. If the message is not sent from the Outbox, you will receive a sound alert along with a Message Sending Failure notice on the screen. Another attempt will be made to send the failed message and after two unsuccessful attempts, the message will no longer be sent automatically.
• Select slide: If the multimedia message has more than one slide, you can select and move to the desired slide. • View Attachment: View attachment of the message. • Message Details: Allows you to view the information on the message. Message Settings Voicemail Save to This menu provides you with a quick way of accessing your voice mailbox (if provided by your network). Note: Please check with your network service provider for details of their service in order to configure the handset accordingly.
Messaging Text Message • Text Templates There are 6 predefined messages in the list. You can view and edit the template messages or create new ones. The following options are available when you touch . - Add New: Allows you to create a new template. - Delete: Allows you to delete the selected template message. - Delete All: Deletes all messages in the folder. To edit an existing Template, touch it (to open) then touch the text. The Edit Template screen will automatically open. • Msg Center No.
Multimedia Message • Templates: Multimedia templates are available and can be created here. • Priority: You can choose to set the priority of the message. • Subject: You can enter the MMS Subject when this option is . You can switch between to by dragging it from left to right. • Validity Period: This network service allows you to decide how long your multimedia messages will be stored at the message center.
Messaging Email • Email Accounts: Manage your email accounts. • Allow Reply Email: Choose whether to allow read confirmation messages to be sent. • Request Reply Email: Choose whether to request read confirmation messages. • Retrieve Interval: Select how often your GW382f checks for new email messages. • Retrieve amount • Include Message in Fwd & Reply: Select to include the original message in your reply. • Include Attachment: Select to include the original attachment in any reply.
