User's Manual

18
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAM CONTROL
Only input signals which are connected to a TV or Wireless Media Box can be activated and selected.
Wireless Connection
Wireless Connection Established. Now you
can use wireless to an external input.
Wireless Signal
See the connection device
Close
When you select the "See the connection device",
you can see the connected device.
■ Select your desired Source.
When you change the input source, it can take up to 10 seconds depending on the wireless environment.
Antenna USB
HDMI4
AV1 AV2 Component1
RGB
OK
Move
Input List
Component2
HDMI2 HDMI3
AV1 AV2
Input Label
Exit
Wireless input source
* This is the screen when the Wireless Ready Dongle is connected to HDMI/DVI IN 1. HDMI terminal connected
to Wireless Ready Dongle is not displayed on the list of external inputs.
AV1
AV2
You can control the external device (VCR, DVD player etc.) connected to the Media box from the TV
using the infrared controller called IR-Blaster.
Set up the TV menu as shown below.
1
Select OPTION.
2
Select IR Blaster.
3
Select On.
•
Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1
Select OPTION.
2
ENTER
Select IR Blaster.
3
ENTER
Select On.
or
INPUT LIST
IR BLASTER SETUP