User's Manual Part 3

STAREX-IS BSM Manual

Page:540(877)

Issue:1.

SMD-011-PMA210

##NOK - BAMA NO RESPONSE

##NOK - ACU or REC NO RESPONSE

##NOK - UNKNOWN REASON

##OK - SET ACU TIME COMPLETED

4.8.4.5. Temperature Set Command

This is the command to set the temperature (high/low/middle)’s threshold value of

which the environment monitoring module takes control. If the temperature surpasses

the set threshold value, the alarm is generating.

• Command SET-ENV-TEMP:

[BSC=a],[BTS=b],[HI_TEMP=c],[LOW_TEMP=d],[MID_TEMP=e];

a : BSC Number(0 ~ 11)

b : BTS Number(0 ~ 47)

c : High Temperature(0 ~ 200)

d : Low Temperature(-20 ~ 200)

e : Middle Temperature(-20 ~ 200)

• Input SET-ENV-TEMP:

• Display

a : Locate Information

b : ##PROC_NOT_EQUIP

##PROC_ABNORMAL

##THIS COMMAND IS IN SERVICE

##NOK - BTS TYPE MISMATCH

##NOK - BAMA ABNORMAL

##NOK - ACU ABNORMAL

##NOK - RECTIFIER ABNORMAL

##NOK - BAMA NO RESPONSE

##NOK - ACU or REC NO RESPONSE

##NOK - UNKNOWN REASON

##OK - SET ACU TEMPERATURE COMPLETED

MSC(0x00) date time

M8034 SET ACU ALARM VALUE TEMPERATURE(HIGH/LOW/MIDDLE)

LOCATE = a

RESEON = b