Installation Guide

ManualsBrandsLexora ManualsBathSavera 30 in. W x 36 in. H Recessed or Surface-Mount LED Mirror Medicine Cabinet with Defogger

�

L�XORA

Installation Instructions r

LED Medicine Cabinet





■ Single Door ■ Double Doors

■ Three Doors

Installation Tools Needed

Measuring Tape

Level

Drill

Screwdriver

Hammer

E Screw

Bracket

Screw Cover

Shelf Clip

Glass Side Panel

C Glass Shelf

Summary of content (5 pages)

PAGE 1
Installation Instructions for LED Medicine Cabinet � L�XORA Note: To ensure safe general use of this product please follow the installation instructions carefully. Product must be installed indoors and on a suitable load bearing wall.Installation should be done by a licensed contractor and/or electrician.
PAGE 2
Installation Instructions for LED Medicine Cabinet � L�XORA SURFACE-MOUNT INSTALLATION ..... 1. 2. 3. 4. 5. 6. Remove the door prior to mounting your cabinet. Position the cabinet on the wall, level and mark the pre- drilled holes. Install the brackets in the horizontal position using the anchor and screw. Lift the medicine cabinet and securely fasten in the groove, make sure the medicine cabinet is leveled. Insert the provided shelf clips into the round holes on both sides of the cabinet.
PAGE 3
Installation Instructions for LED Medicine Cabinet � L�XORA RECESS-MOUNT INSTALLATION 5 2 3 6 7 8 1. Remove the door(s), side glass, top and bottom light strips prior to mounting your cabinet. 2. Draw the perimeter of the medicine cabinet on the wall. 3. Cut the marked perimeter.
PAGE 4
Installation Instructions for LED Medicine Cabinet � L�XORA HARDWIRE INSTRUCTIONS Warning: Manufacturer's warranty shall be void if product is not installed by a licensed professional. Prior to commencing installation, please ensure the following: - the wall where the product is being installed is able to support the weight of the product - the main electrical supply has been powered off to complete installation • Green= GROUND wire. connect to the ground wire in your box, or to the box as a ground.
PAGE 5
Installation Instructions for LED Medicine Cabinet � L�XORA OPERATING INSTRUCTIONS 0 Functions: Wifi Humidity Outside temperature Indoor temperature Weather Month/Date Time Week Bluethooth Light and defogger control switch Display brightness 1) Touch round button one lime to control the lop and bottom lights, defogger, bluetooth on and off. 2) Touching the round button twice to open or hide the display screen. 3) Touching and holding the round button will control the light intensity (dimmer).