Operation Manual

3 From the Paper Options area of the Print Setup tab, select Borderless.

For Macintosh users

With a photo open, choose File > Page Setup.

If there is no Page Setup item on the File menu, then go to step 2. Otherwise, specify your print settings:

a From the Settings pop-up menu, choose Page Attributes.

b From the “Format for” pop-up menu, choose your printer.

c From the Paper Size pop-up menu, choose a paper size that has “(Borderless)” in its name.

For example, if you loaded a 4 x 6 photo card, then choose US 4 x 6 in (Borderless).

d Select an orientation, and then click OK.

2 From the menu bar, choose File > Print.

If you have already specified the printer, paper size, and orientation in step 1, then you may have to choose your

printer again from the Printer pop-up menu before going to step 3. Otherwise, set them:

a From the Printer pop-up menu, choose your printer.

b From the Paper Size pop-up menu, choose a paper size that has “(Borderless)” in its name.

For example, if you loaded a 4 x 6 photo card, then choose US 4 x 6 in (Borderless).

c Select an orientation.

3 If necessary, click Advanced.

4 From the print options pop-up menu, choose Print Settings or Quality & Media.

• From the Paper Type pop-up menu, choose a paper type.

• From the Print Quality pop-up menu, choose Photo or Best.

5 Click Print.

Streaks or lines on printed image

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

CHECK THE INK LEVELS

Replace low or empty ink cartridges.

SELECT A HIGHER PRINT QUALITY FROM THE PRINTER SOFTWARE

MAKE SURE THE INK CARTRIDGES ARE PROPERLY INSTALLED

ALIGN THE PRINTHEAD

CLEAN OR DEEP CLEAN THE PRINTHEAD NOZZLES

Note: If these solutions do not remove the streaks or lines on the printed image, then contact technical support.

Troubleshooting

112