user manual

Load up to: Make sure that:

10 iron-on transfers

• You follow the loading instructions on the iron-on transfer

packaging.

• The print side of the transfer is faceup.

• The paper guides rest against the edges of the transfer.

• You select Automatic, Normal, or Photo print quality.

50 transparencies

• The rough side of the transparencies is faceup.

• The paper guides rest against the edges of the

transparencies.

Saving paper default settings

You can set the default paper size, paper type, and photo print size for the documents and photos that you print.

Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.

1 From the printer control panel, press .

2 Choose the default settings:

• If you want to set the default paper size:

a Press to select Paper Setup.

b Press the up or down arrow button to scroll to Paper Size, and then press .

c Press the up or down arrow button to select the default paper size for the printer, and then press .

• If you want to set the default paper type:

a Press to select Paper Setup.

b Press the up or down arrow button to scroll to Paper Type, and then press .

c Press the up or down arrow button to select the default paper type for the printer, and then press .

• If you want to set the default photo print size:

a Press the up or down arrow button to scroll to Defaults, and then press .

b Press to select Photo Print Size.

c Press the up or down arrow button to select the default photo print size for the printer, and then press

3 Press until you exit Setup, or press another mode button.

Loading paper and original documents