Cut Sheet

Component
Specifications
3880-DIN
Fiber Raceway Horizontal and Vertical Tees
Fiber Raceway Horizontal and Vertical Tees
Part Numbers
SXVTE-TEX, SXHTE-TEX,
SXJNR-SLX
2222 – 222nd St. SE • Bothell, WA 98021 USA
Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available.
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.
Spec sheets and updates are also available at www.leviton.com.
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit www.leviton.com.
TYPICAL SPECIFICATION
Horizontal Tees shall be used to branch off the duct and extend
the fiber route in various directions. Vertical Tees shall be used to
change duct elevation and/or provide an inline drop-off point for
cables routed to fiber distribution frames or other high volume
equipment. Horizontal and Vertical Tees shall protect fiber and
help maintain proper bend radius. Components shall be UL rated
and manufactured of fire retardant materials. Retrofit covers shall
be available.
ELECTRONIC FILES
For CAD files, Typical Specs, or Dimensional Line Art (.DXF, .DWG,
MS-DOS.eps or .TXT), visit www.leviton.com.
APPLICATION
Horizontal Tees are used to branch off the duct and extend the
fiber route in various directions. Vertical Tees can be used to
change duct elevation. Vertical Tees may also provide an inline
drop-off point for large numbers of cables routed to fiber
distribution frames or other high volume equipment.
FEATURES
• Available in five sizes
• 2" x 2"
• 2" x 4"
• 4" x 4"
• 4" x 8"
• 4" x 12"
• Available with or without covers
• Vertical Tee can be used as a drop off point along the duct system
• Retrofit Vertical Tees are used to add fiber to existing duct systems
STANDARDS COMPLIANCE
UL 94 V-0 Material Rating for Flammability
Meets NEBS GR-63-CORE*
UL 2024A Optical Fiber Raceway, Riser Rated
PHYSICAL SPECIFICATIONS
Color: See page two
Material: Noryl Plastic
Dimensions: See page two
DESIGN CONSIDERATIONS
• Manufactured of a fire retardant plastic that is halogen free.
• May be utilized to store and route copper cable in an indoor
environment. It is recommended that fiber and copper be
stored in separate systems.
• Use with Fiber Raceway Joiners or Slotless Joiners to
connect to ducting and other components.
• The 4" x 12" component does not contain end slots and
should be used in conjunction with the Slotless Joiner.
• Horizontal Tees:
• Provides a tee intersection that changes the
direction of the duct route.
• Vertical Tees:
• Redirects fiber while maintaining proper bend radius control
• Provides a path for ongoing fiber while offering strain relief
for fiber exiting down the vertical section
• Retrofit Vertical Tees can be used to add a drop off point in
duct systems where fiber has already been laid
*Testing conducted by an accredited third party