User's Manual

Add Item: To add a device to the Monitor List manually, enter

the IP Address of the device that you want to monitor.

Delete Item: To delete the device in the Monitor List.

Device Setting

You can set the device by using the function key in the Device

Setting Dialog box.

Configuration Setting: In this Configuration Setting, you can

set the IP Address, Subnet Mask, Gateway, Set Trap to (Trap

IP Address), System name and Location.

Select the device in the Discovery list or Monitor List and press

this button, then the Configuration Setting window will pop out

as Figure 9, after filling up the data that you want to change,

you must fill up the password and press the “Set” to process the

data changed immediately.

Figure 9. Configuration Setting

Password Change: You can use this Password Change when

you need to change the password, fill in the password needed

in the dialog box and press “Set” button to precede the

password change immediately.