Manual

8
LED Indicators
Power Indicator (PWR)
This LED lights green when the switch is receiving
current; if not, power is off.
100M Link/Activity, 10M Link/Activity
(100M LINK/ACT(green), 10LINK/ACT(yellow))
This indicator light green when the port is connected to a
100Mbps Fast Ethernet station, if the indicator blinking
green will be transmitting or received data on the
100Mbps network. Otherwise, if the indicator light amber
when the port is connected to a 10Mbps Ethernet station,
if the indicator blinking amber will be transmitting or
received data on the 10Mbps network.
100BASE-FX Module Indicator(green)
The FX Link/Rx, indicate a good link to a module
installed.
Full/Half Duplex, 10/100M Collision
(10/100M FDX(green),10/100M COL(blinking))
This LED indicator lights green when a respective port is
in full duplex (FDX) mode. Otherwise, it is OFF for half
duplex (HDX) operations. It blinking green when
collisions are occurring on the respective port.