Datasheet
KVM Cat.5 Extender Kit
KVM-9005
LevelOne’s KVM-9005 Cat.5 KVM Extender
allows you to locate PC, SERVER or KVM SWITCH
up to 500feet /150m away from your controlling
keyboard, mouse and VGA monitor using
popular and inexpensive Ethernet cabling. The
extender includes two devices, a “KVM-9005T
transmitter “ to synthesize the keyboard/mouse/
VGA monitor signal for easy long-distance
transmission over popular Ethernet CAT.5 cable
and a “KVM-9005R receiver“ to retrieve the
synthetic signal back to keyboard/mouse/VGA
monitor signal.
The Cat.5 Extender uses the existing network
construction to transfer console signals to
remote sides. You just need to install a pair of
transmitter and receiver into local and remote
sides individually to provide you with the
exibility needed to control server groups either
from a remote side (from the transmitter) or
from a local site (from receiver).
With its compact design, our Cat.5 Extender
easily ts on a desk or any limited space. No
software or interface card is required. You can
easily active this device by simply connecting it
to the power source (only required for receiver)
and to the network cable, further saving cable
layout and cable installation cost.
Key Features
- Remote console up to 150m
- Dual user access: at sender and receiver
- Supports Cat. 5/6/7
- Superior high VGA resolution up to 1280 x
1024
- LEDs for power and data transfer
- Receiver with knob for manual video signal
tuning
- Works with KVM Switches and single PC
- No software necessary
- Easily install in few minutes
- Includes cable 0.9m (from PC or KVM switch to
console)
- Compatible with DOS, MS Windows, Linux,
Unix and Netware
ACC-1000
KVM Cat.5 Console Module
Related Products
1. RJ45 Port
2. Dip Switch
3. VGA Console Port
4. PS/2 Console Port
5. VGA Console Port
6. PS/2 Console Port
7. PS/2 PC Port
8. VGA PC Port
9. RJ45 Port
10. Power Jack
11. PC1/PC2 LEDs
12. VGA Tuning
13. Power LED
14. Status LED
H/W Version: 3
KVM-9007
KVM Cat.5 Console Receiver
1 3 54 4 4 5 4
6 7 8 7 9 10
11 11 13 1412
2