Operating Instructions

30
4.15 Accessibility: Different options to facilitate the accessibility of the Tablet
4.16 Development options: Options for developers.
4.17 About the unit: Displays
information about the Tablet and the OS
5. Problem solution
The tablet does not start or does not show image?
Check battery. Connect the charger DC power connector of your device and wait. If the battery is
completely depleted, charging 4-5 hours will be enough to take autonomy.
Can’t get to charge the tablet’s battery with the DC charger?
Most LEOTEC tablets allow battery charge connected to the USB port of a computer usin
g the supplied cable. See if your model allows it on the comparison chart that can be fou
nd on the LEOTEC website.
Did you forget your password or unlock pattern?
Enter the LEOTEC site’s download area and locate the original firmware upgrade guide for your
tablet model (eg LETAB904) to restore your system Android from your computer.
Can’t play videos that you can actually play on your computer?
Just as we need to install codecs in a computer to reproduce some extensions and video
formats, the tablet works the same way. Access Market and locate the codec application
you’re interested in.
The tablet boots and freezes with the word Android on screen but doesn’t get to the
unlock menu?
It is possible that some recently installed application isn’t ready to be used in the tablet or it may
be consuming too much work memory. Enter the download area in LEOTEC website and look for