Manual

Safety instructions
General safety instructions for drive components
2
EN
7
Lenze ¯ MA 12.0014 ¯ 1.0
2 Safety instructions
2.1 General safety instructions for drive components
 Danger!
Disregarding the following basic safety measures may lead to severe
personal injury and damage to material assets!
¯ Store in dry, low−vibration environment without aggressive atmosphere; if
possible in the manufacturer’s packaging.
– Protect against dust and impacts.
– Observe the climatic conditions according to the technical data,  catalogue.
¯ Lenze drive and automation components ...
... must only be used as intended.
... must never be commissioned despite noticeable damage.
... must never be technically changed.
... must never be commissioned in an incompletely mounted state.
... must never be operated without the required covers.
... may have live, moving or rotary parts during and after operation − corresponding
to their type of protection. Surfaces may be hot.
... must not be operated with large vibrations.
... must not be operated in the frequency range of a plant or the drive system.
¯ All specifications of the corresponding enclosed documentation must be
observed.
This is vital for a safe and trouble−free operation and for achieving the specified
product features.
¯ Only qualified skilled personnel are permitted to work with or on Lenze drive and
automation components.
According to IEC 60364 or CENELEC HD 384, these are persons ...
... who are familiar with the installation, assembly, commissioning and operation of
the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident prevent regulations,
directives and laws applicable at the place of use.