Owner's manual

General information
7
Feldbus-Baugruppe 2113 INTERBUS
7.2
L
7.2-2
EDSIBS-1.0-06/2003
The fieldbus module can be used together with devices with the following
nameplate data:
820X E./C. 2x. 1x. Vxxx (8201 - 8204)
821X E./C. 2x. 2x. Vxxx (8211 - 8218)
822X E. 1x. 1x. Vxxx (8221 - 8227)
824X E./C. 1x. 1x. Vxxx (8241 - 8246)
82EVxxxxxBxxxXX Vx 13 (8200 ve cto r )
82CVxxxxxBxxxXX Vx 13 (8200 vector, Cold plate)
EPL 10200 I./T. 1x 1x (Drive PLC)
93XX Ex/Cx 2x 1x (9321 - 9332)
93XX E.C. I./T. 2x 1x (Servo PLC 9300)
Type
Design:
Ex = Built-in unit IP20
Cx = Cold plate
I=ServoPLC
xK = Cam profiler
xP = Positioning controller
xR = Register controller
xS = Servo inverter
Hardware version
Software version
Variant
Explanation
The fieldbus modle 2113 INTERBUS is
l an attachable intelligent additional module with a 16-bit micro-processor.
l compatible with the Lenze fieldbus module 2111 INTERBUS.
Benefits of the fieldbus module 2113 INTERBUS:
l Communication of 82XX, 8200 vector, 93XX controllers and 9300 servo PLC
via INTERBUS.
l Communication of Lenze Drive PLCs via INTERBUS.
l Bus connection via remote bus according to standard RS485.
l Access to all Lenze parameters.
l BecauseofitsDIPswitchonthefront:
– Choice between DRIVECOM drive profile 21 or device control AIF-CTRL.
– Change of baud rate.
– Change of number of process data words (PD)
– Change of number of parameter data words (PCD).
Application range
Features
Show/Hide Bookmarks