Owner manual

6 Commissioning

6.4 Establishing an online connection via EtherNet/IP with the Lenze »Engineer«

Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

In the »Engineer«, you can use the Online  Set communication path and go online menu

command to select the EtherNet/IP communication path. The previously configured EtherNet/IP

nodes are shown in the "Communication path" dialog window:

If the device access path is not configured correctly, the IP address of the drive selected in the

display field can be entered manually here.

Via the Search/Enter button, you can establish a connection to devices which have not

appeared in the display field. Corresponding settings for this can be made in the "Enter IP Address"

dialog window that will appear:

Here you can enter an IP address manually or execute the following actions using the buttons:

• Execute the console command Ping.

• Assign the IP address via the Configurator.

Setting via the EtherNet/IP configurator of the »Engineer«

( 38)

• Select the device access path to the desired drive by clicking Find.

After having established the online connection, you can continue work with the »Engineer« as

usual.